Quote:
Originally Posted by mgbrv8
I removed one and a eighth gallons by tapping into the line that goes to the radiator from the coolant resevior like is depicted below is this sufficient for a upper plenum pull?
Dave
|
I would think that would be close......you want to get below the top of the IH coolant manifolds. You want to have a couple of Jerry's Plenum gaskets on hand also. I just drain coolant out of the radiator petcock on lower passenger side of radiator. I also have on hand a gallon of NAPA antifreeze to replenish the coolant. Or a good time to flush the coolant system and replace coolant.
PLENUM
Plenum pull TIPS
Plenum Removal Simplified TIPS
LT5 IH, Fuel Rails, Plenum Install Tricks
Plenum pull questons
Plenum pull tools and parts
Plenum pull parts
Under the plenum
Plenum bolts install
Porting
Plenum & Cam cover restored pictures
Plenum gasket drawing
Ebay ZR1 LT5 Plenum