I need your opinions
Which color powdercoat would you guys use
http://www.eastwood.com/hotcoat-powder-silver-base.html Or http://www.eastwood.com/hotcoat-powd...le-silver.html Or http://www.eastwood.com/hotcoat-powd...-aluminum.html Or http://www.eastwood.com/hotcoat-powd...-charcoal.html Dave thanks guys |
Re: I need your opinions
It might help to know what your painting?
|
Re: I need your opinions
Sorry, good point :thumbsup:, It the intake lower and upper and the valve covers, and throttlebody.
Dave |
Re: I need your opinions
First one.
|
Re: I need your opinions
Out of those 4 choices I would pick the 1st one. But I'm not really wild about any of them. The painted plenums I have seen and liked have been a shade of silver or very light grey, all a little darker than the 1st 3 choices, but a lot lighter than the 4th choice. The silver that Mark Haibeck does I like a lot. None of those 4 seem right to me.
|
Re: I need your opinions
1 Attachment(s)
Maybe this will help The argent silver is the first one on the list, Rally Wheel Charcoal is the last one. Also if you all know of another good source for powder feel free to share.
Thanks you Gentlemen Dave |
All times are GMT -4. The time now is 05:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020