My '90 ZR-1 project update thread
 

Thought I'd start a new thread and post updates and pictures as I progress. Go to this link to for the beginnings of this project:

http://www.zr1.net/forum/showthread....ight=bdw18_123


I'm still in the 'cleaning everything real good' stage, which is turning out to be a very large project just by itself. I just can't stand putting something back together dirty, even if it takes a lot of work to get it clean.

The previous owner replaced the fuel injectors, but I didn't know where he got them from. Then I happened to look in the bag of the old, original injectors and I found these:

http://i13.photobucket.com/albums/a2...3/STA70002.jpg

Which was a pleasant surprise as I have heard nothing but glowing reviews about FIC, so I know the injectors are good quality.


Here are a few before and after clean-up pics:

Fuel injector rails & IH's before
http://i13.photobucket.com/albums/a2...123/IHs_b4.jpg

Fuel injectors & rails after (also installed the new fuel pressure regulator, which came with the car)
http://i13.photobucket.com/albums/a2...3/STA70001.jpg

IH assemblies after
http://i13.photobucket.com/albums/a2...3/STA70003.jpg

http://i13.photobucket.com/albums/a2...3/STA70004.jpg

Re: My '90 ZR-1 project update thread
 

Plenum, throttle body & airhorn before
http://i13.photobucket.com/albums/a2.../plenum_b4.jpg

Plenum after
http://i13.photobucket.com/albums/a2...3/STA70007.jpg

http://i13.photobucket.com/albums/a2.../STA700082.jpg

Re: My '90 ZR-1 project update thread
 

Throttle body & airhorn after
http://i13.photobucket.com/albums/a2...3/STA70005.jpg

http://i13.photobucket.com/albums/a2...3/STA70006.jpg

Alternator before
http://i13.photobucket.com/albums/a2...ernator_b4.jpg

Alternator after (I painted the aluminum case halves with paint that imitates new cast aluminum look, cleaned interior of alternator also)
http://i13.photobucket.com/albums/a2...3/STA70009.jpg

http://i13.photobucket.com/albums/a2...3/STA70010.jpg

The plenum, IH's & airhorn/throttle body cleaned up pretty good. There are some stains I can't get out and the top of the throttle body has an area where the coating is missing, but they look much better than before.

That's it for now. :thumbsup:

Re: My '90 ZR-1 project update thread
 

nice work . did you have to put the heads back on it ? wasnt sure of the shape it was in when you got her ???

Re: My '90 ZR-1 project update thread
 

Jon, go to this link for the whole story from the beginning:

http://www.zr1.net/forum/showthread....ight=bdw18_123

Re: My '90 ZR-1 project update thread
 

Ben:

Looks like she's cleaning up really nice.
:-D

One small thing though...
There is a ring of special sealant called "DAG" around the blades of the throttle body that seals the blades and helps with the idle.
Hopefully, you accidentally didn't clean it off too...
http://www.zr1netregistry.com/forum/...32&postcount=9


TomC
"Crabs"

Re: My '90 ZR-1 project update thread
 

Hmmm... Thanks for the heads up on that, I had no idea about that stuff. There was a line of blackish stuff at the edges where the rod goes through the throttle body, but there wasn't much there. Is it supposed to go on all 3 throttle blades, or just the 2 big ones? Does it go on the blade itself or on the throttle bore walls? Can you still buy this "DAG" stuff somewhere or its equivalent?

Re: My '90 ZR-1 project update thread
 

Ben:

I don't think it's something that you can buy at the local parts store, I've never needed it so I've never looked.
If you've cleaned the bores 'till they shine, then it's gone.
My thoughts would be to put it back together and if your idle is *way* high, then think about finding some or have the throttle body serviced by a pro.
I know that Marc Haibec offers a rebuild service, here's a write-up over on his website.
http://www.zr1specialist.com/HAT%20W...tle%20body.htm

TomC
"Crabs"

Re: My '90 ZR-1 project update thread
 

Couple more before & after cleanup pics. :thumbsup:

Before:
http://i13.photobucket.com/albums/a2...3/STA70011.jpg

After:
http://i13.photobucket.com/albums/a2...3/STA70012.jpg

Re: My '90 ZR-1 project update thread
 

Before (it was actually much more oily/dirty, I wiped the worst off before this pic):
http://i13.photobucket.com/albums/a2...3/STA70015.jpg

http://i13.photobucket.com/albums/a2...3/STA70016.jpg

After:
http://i13.photobucket.com/albums/a2...3/STA70019.jpg

http://i13.photobucket.com/albums/a2...3/STA70020.jpg