Re: Clutch Out, Which Should I Buy?
 

Input shaft is shorter for base C4.

Re: Clutch Out, Which Should I Buy?
 

Listen to the above , Jerry has the right RAM system for you.

Re: Clutch Out, Which Should I Buy?
 

Frank, do you have experiance with the Ram stuff? I do.

Re: Clutch Out, Which Should I Buy?
 

If you are close to Henderson Performance, ask him about the clutch and pressure plate out of my car. Very few easy miles. They are replaced as they may not have handled my power increase. Will sell cheap.

Re: Clutch Out, Which Should I Buy?
 

Bidwell, what was the clutch?

I spoke with Jim at length, I like how my clutch engages and disengages. Looks like i'll be going with a NOS pressure plate and clutch, will reface the flywheel.

Re: Clutch Out, Which Should I Buy?
 

I'm not sure what clutch it is. I had put in when SGC did the 368 build. I doubt if is has 5000 miles on it. I used it with an aluminum flywheel. I'm sure Corey can give you better information. Good luck with your project.

Ron Bidwell

Re: Clutch Out, Which Should I Buy?
 

you can't reface the flywheel

Re: Clutch Out, Which Should I Buy?
 

Not necessarily correct, I believe that Jandik actually "resells" them. DMF's have been resurfaced for years but successfully only by "the talented few".

Re: Clutch Out, Which Should I Buy?
 

Been using the RAM DD in my car since 2010.

Re: Clutch Out, Which Should I Buy?
 

I will confirm Dave's statement. I was talking to Jim J. just 2 days ago & this specific topic came up. Doing the job correctly does require "the talented few".