ZR-1 Net Registry Forums
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   Aux input on CDM / receiver? (http://zr1.net/forum/showthread.php?t=24766)

cmb 03-09-2015 07:51 PM
Aux input on CDM / receiver?
 
It looks like there are a few car radio repair businesses that offer the service of adding a 3.5 mm auxiliary input jack to the Bose CDM / receiver box. Has anyone here had this done?

I'm very comfortable with a soldering iron (and doing thru-hole rework if necessary), so I'd prefer to make this modification myself to save some money and learn something in the process. If anyone has photos, a schematic, or a description of the changes required, that would be very helpful.

At this point, I'm really only interested in adding the aux input at the CDM, not at the head unit.

--Colin

GOLDCYLON 03-09-2015 08:06 PM
Re: Aux input on CDM / receiver?
 
Quote:
Originally Posted by cmb (Post 221436)
It looks like there are a few car radio repair businesses that offer the service of adding a 3.5 mm auxiliary input jack to the Bose CDM / receiver box. Has anyone here had this done?

I'm very comfortable with a soldering iron (and doing thru-hole rework if necessary), so I'd prefer to make this modification myself to save some money and learn something in the process. If anyone has photos, a schematic, or a description of the changes required, that would be very helpful.

At this point, I'm really only interested in adding the aux input at the CDM, not at the head unit.

--Colin
I have only ever seen it done to the head Unit in the Cassette area. corvetteforum.com has a radio section I suggest you look in there as well but it spans ALL generations.


http://www.corvetteforum.com/forums/...lectronics-20/

cmb 03-09-2015 08:42 PM
Re: Aux input on CDM / receiver?
 
Quote:
Originally Posted by GOLDCYLON (Post 221437)
I have only ever seen it done to the head Unit in the Cassette area. corvetteforum.com has a radio section I suggest you look in there as well but it spans ALL generations.


http://www.corvetteforum.com/forums/...lectronics-20/
I'll give that a try. I did find a few threads over there that had been started and abandoned without much information being posted.

For reference, here's the setup that I had in mind:

http://i39.tinypic.com/28bb6me.jpg

tf95ZR1 03-10-2015 03:12 AM
Re: Aux input on CDM / receiver?
 
http://i529.photobucket.com/albums/d...psbmknfmfs.jpg

http://i529.photobucket.com/albums/d...pshxpsrdfr.jpg

Schrade is the Electronics Mod Guru

http://www.zr1.net/forum/showthread....light=bose+aux

I believe Marc Haibeck also offers this mod

http://www.zr1specialist.com/

Billy Mild 03-10-2015 10:21 PM
Re: Aux input on CDM / receiver?
 
It would be neat if the AUX in didn't require a CD to be playing the whole time. I did that in my Jeep and now that the changer is going out it no longer works.

Why was Schrade's post deleted?

SillyB 03-23-2015 06:52 PM
Re: Aux input on CDM / receiver?
 
I always had in the back of my wish list to do this mod too, any chance we can get a refresh on the post? My CD player is dead and I'd love to hook up an old MP3 player in the glove box.

dredgeguy 03-24-2015 09:59 AM
Re: Aux input on CDM / receiver?
 
2 Attachment(s)
I sent my head unit to Dr. Don and he put the aux input on the end of a long wire and I have it in my center console glove box. Will be connecting a small XM radio to it shortly. I like it because everything looks stock.

Billy Mild 03-24-2015 10:04 AM
Re: Aux input on CDM / receiver?
 
With Dr. Don's mod do you still have to have a CD spinning or a tape in the deck?

mike100 03-24-2015 10:17 AM
Re: Aux input on CDM / receiver?
 
Schrade did it and provided a partial schematic and pics of where the wiring goes.

dredgeguy 03-24-2015 10:51 AM
Re: Aux input on CDM / receiver?
 
Quote:
Originally Posted by Billy Mild (Post 222549)
With Dr. Don's mod do you still have to have a CD spinning or a tape in the deck?
There is a power button that you press to activate the aux input and I believe it is off the tape connection but no tape has to be in the unit. Best for you to call Dr. Don at 936-435-1811 and he will explain it all to you. He is a great guy and takes the time to explain everything.


All times are GMT -4. The time now is 04:57 AM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020