horn repair tip

[ZR1 MK]

My horns started to fail intermittently. The adjustment screw on each horn doesnt look like it would adjust or even have movement. If it wasnt for the manual, I never would imagine its an adjustment item. I rotated the adjustment screw on each horn 90 degree in each direction and back to its original position. Proper adjustment is based on amp draw, but I wasnt getting too far, so a quick turn was my alternate. They are still working 9 months later.

[WB9MCW]

I replaced one of my horns (drivers side) with an alarm siren. Since you can't flash the lights on the vette (most of em anyway) I figure the horn/siren is the way to go 4 safety reasons. My sound is good enough to get the attention of an old man mowing the yard on a rider mower(first test I tried). Works great for those corvette visually impaired drivers we always seem to come upon (usually at great speed and when least expected)!!! :blahblah:

[tomtom72]

Thanks for the heads up, Mike. :thumbsup: I'm filing this one away.

:cheers:
Tom