PDA

View Full Version : Lots ZR-1 and LT5 parts FS please buy it all!


phrogs
08-17-2009, 06:15 PM
Update I will be able to deliver up in carlisle so lets go people!


Ok before I hit the bay with these Ill give you guys a shot at them since it will probably be you buying them anyway! No need to line ebays pockets we already have to deal with paypal.





Bellhousings I have 2 of them $300 each

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1170.jpg


Throttle body good for a 63MM or larger had some damage by bubba needs finished machining done still stock bore. $250

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1163.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1161.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1162.jpg



The airfilter to throttle body accordian air duct $80

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1125.jpg



The ECM cover $75 SOLD



Tail light wiring harness $100

http://i150.photobucket.com/albums/s103/zr1salvage/parts/ZR-1taillightharness.jpg



A/C hard line from evaporator $125

http://i150.photobucket.com/albums/s103/zr1salvage/parts/Tubeacevaporator14104967.jpg



Interior harness runs from dash to rear of car for lights hatch control among other things $ 100

http://i150.photobucket.com/albums/s103/zr1salvage/parts/90ZR-1interiorharness2.jpg



FX3 and ABS harness one conector was damaged wiries good $50

http://i150.photobucket.com/albums/s103/zr1salvage/parts/fx3absharness1.jpg



antenna cable from radio to antenna $35

http://i150.photobucket.com/albums/s103/zr1salvage/parts/anttenacable.jpg



Seat wiring harness for power seats $35

http://i150.photobucket.com/albums/s103/zr1salvage/parts/harnessforsportseats.jpg



Low tire pressure reciever $50 I have 2

http://i150.photobucket.com/albums/s103/zr1salvage/parts/LTPSreciever2.jpg



low tire pressure sensors I have 2 left from this set green and orange $130 each

http://i150.photobucket.com/albums/s103/zr1salvage/parts/LTPWS.jpg



A/C line from accumulator $100

http://i150.photobucket.com/albums/s103/zr1salvage/parts/hoseacaccumulator10157992.jpg



Engine harness pretty sure its from a 91 cut up and for parts only! SOLD



6 speed shifter console with door I have 3 of them they are not perfect they have scrathes and dings they are used. $75 each

http://i150.photobucket.com/albums/s103/zr1salvage/parts/shifterconsole-2.jpg


Rear bumber support brackets I have 2 sets these are on the outboard corners of the LT5 bumper to hold up that ***! $100 a set

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1364.jpg



Front wheel well rear splash guards these are ZR-1 specific $75 each

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1368.jpg



Door panels black need the carpet replaced cat got to them $100 for the pair comes with new ACC carpet.

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1346.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1347.jpg



dash pad with black carpet $100 (I can get a better pic let me know)

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1344.jpg



number of springs valves and keepers I would have to count them all but Im sure some keepers are missing but 8 intake valves $200 for whats in the box

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1338.jpg



Exhaust hangers brand new! $ 75 for all three SOLD



Fuel delivery and return lines $250

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1443.jpg



O2 sensor extentions for use with headers $100 SOLD



ECM mount braket sits behind brake booster $100

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1451.jpg



rear storage compartment doors $35

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1456.jpg



headlights $100 each I have 4

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1435.jpg



headlight covers $40 each

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1428.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1429.jpg



ZR-1 rack and pinion less rag joint $150

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1459.jpg



Rear end suspension pieces, not including the spring brake rotors and the sway bar just the other parts $400

http://i150.photobucket.com/albums/s103/zr1salvage/DSC00163.jpg



rear toe/tie whatever bar I have 3 of them $100 each

http://i150.photobucket.com/albums/s103/zr1salvage/toerod.jpg



ZR-1 brakes probably need a rebuild been sitting for years $200

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1458.jpg



1991 airbag controler suppost to be good I really don't know? I have 2 if these $50

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1461.jpg



ACC carpet peices $65 for the door sills $45 for the others

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1463.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1465.jpg



Front frame bracket for wreck damage $55

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1343.jpg



Radiator upper and lower supports $75 for upper $65 for lower.

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1361.jpg


ZR-1 specific rocker panels $350

http://i150.photobucket.com/albums/s103/zr1salvage/parts/new%20parts%20july%202009/IMG_1625.jpg


Pressure plate not sure if its for a L98 or a ZR-1 have to measure it but I think its the smaller one for a L98 $65

http://i150.photobucket.com/albums/s103/zr1salvage/parts/new%20parts%20july%202009/IMG_1623.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/new%20parts%20july%202009/IMG_1621.jpg
http://i150.photobucket.com/albums/s103/zr1salvage/parts/new%20parts%20july%202009/IMG_1622.jpg



1990 ZR-1 Dash board plastic skeleton and wiring harnes airbag went off so I think the controler is no good and the CCM is seperate
$450

CCM has less than 20K miles on it $200

http://i150.photobucket.com/albums/s103/zr1salvage/parts/new%20parts%20july%202009/IMG_1629.jpg



Power seat tracks I have 5 of them 2 of them are from a 88 so they have the extra spring all of them work I tested them in my car.
$100 each

http://i150.photobucket.com/albums/s103/zr1salvage/parts/new%20parts%20july%202009/IMG_1631.jpg



Ill be back with pictures of the following later



Left and right timing chain tensioners 2 sets expanded $250 each pair.



camshaft sprockets viners and camshaft retainers $350 for all of it.



1991 LT5 engine requires assembly torn apart must be checked and rebuild comes with new crankshaft bearings, conecting rod bearings and head gaskets. Includes all accesories plenum and throttle body just not all in the photo will need injectors and harness $5000

http://i150.photobucket.com/albums/s103/zr1salvage/91engine.jpg

-=Jeff=-
08-17-2009, 07:33 PM
Are any of the mounting tabs broken on the dash pad?
Is the pad curling anywhere?

LGAFF
08-17-2009, 09:11 PM
Will take the osprey, do you take paypal?

XfireZ51
08-17-2009, 09:19 PM
Will take the osprey, do you take paypal?

Don't bother. PP already sent. :p

scholtmj
08-17-2009, 11:23 PM
I might be crazy, but doesn't the cam cover emblem indicate that motor is a '90? How many miles are on it?

bdw18_123
08-17-2009, 11:25 PM
Don't bother. PP already sent. :p

Dang, only $75MIL? I was gonna buy it right now, but you beat me to it! :mrgreen:

phrogs
08-18-2009, 06:18 AM
I might be crazy, but doesn't the cam cover emblem indicate that motor is a '90? How many miles are on it?


The emblem is just sittin on there

Mileage was told to me to be in the 30,000K range

Scrrem
08-18-2009, 08:26 AM
Johnny P,
I'll take those exhaust hangers. PM inbound.
Rich

phrogs
08-24-2009, 09:09 PM
PM sent



Are any of the mounting tabs broken on the dash pad?
Is the pad curling anywhere?

phrogs
08-24-2009, 09:10 PM
Johnny P,
I'll take those exhaust hangers. PM inbound.
Rich


Done sold and delivered!

LMP-Chris
10-09-2009, 12:24 AM
valve covers and intake still for sale?

phrogs
10-10-2009, 07:42 PM
LT5s don't have valve covers they have cam covers and they are machined with the head and make a matching pair.

I have one head available $1000

intake need to be more specific in what you need.

I see you only have one post you sure you know what a LT5 is?



valve covers and intake still for sale?

LMP-Chris
10-11-2009, 12:33 AM
LT5s don't have valve covers they have cam covers and they are machined with the head and make a matching pair.

I have one head available $1000

intake need to be more specific in what you need.

I see you only have one post you sure you know what a LT5 is?


Semantics --- :blahblah:

phrogs
10-12-2009, 07:27 PM
Semantics --- :blahblah:


Ok I have 2 valve covers $1500 a piece

no intakes

tccrab
10-12-2009, 07:59 PM
Ok I have 2 valve covers $1500 a piece

no intakes
:dancing:worship::thumbsup:

TomC
"Crabs"

LMP-Chris
10-12-2009, 08:41 PM
Ok I have 2 valve covers $1500 a piece

no intakes

If you insist on being the Messiah of Corvettes and correcting everybody, doing it in an email was one thing. Attempting to embarass me on an open forum is another. But I thank you in advance, it is always good to know who not to do business with.

tccrab
10-12-2009, 09:05 PM
If you insist on being the Messiah of Corvettes and correcting everybody, doing it in an email was one thing. Attempting to embarass me on an open forum is another. But I thank you in advance, it is always good to know who not to do business with.

Chris:

Lighten up a little.
Johnny was trying to be funny.
He's a great guy with a great sense of humor.
I trust him with my life, and since he's an active member of our armed forces, my freedom is in his hands.
Thank you Johnny!

We of the Brotherhood of the Beast are very sensitive about the uniqueness of our mighty LT5 engines.
LT5's don't have valve covers.
LT5's have Cam Covers.
They're integral to the heads, line bored to match the head as a single unit. A cam cover without the associated head is for all intents and purposes worthless.
LT5's don't have Intakes.
It's called a Plenum.

Welcome to the Brotherhood, sorry you've gotten off on the wrong foot.

TomC
"Crabs"

LMP-Chris
10-12-2009, 09:51 PM
Chris:

Lighten up a little.
Johnny was trying to be funny.
He's a great guy with a great sense of humor.
I trust him with my life, and since he's an active member of our armed forces, my freedom is in his hands.
Thank you Johnny!

We of the Brotherhood of the Beast are very sensitive about the uniqueness of our mighty LT5 engines.
LT5's don't have valve covers.
LT5's have Cam Covers.
They're integral to the heads, line bored to match the head as a single unit. A cam cover without the associated head is for all intents and purposes worthless.
LT5's don't have Intakes.
It's called a Plenum.

Welcome to the Brotherhood, sorry you've gotten off on the wrong foot.

TomC
"Crabs"


I can relate with having my jokes misunderstood.......

I am also prior military and have the utmost respect for anyone who is serving or who has served on a personal level. From a business perspective insulting someone when you are trying to sell a product is usually not a good way to make a sale.


And as far as the car -- Yes the ZR1 is a great car and one of the better ideas Chevy has had. However -- it is just a car and a part is just a part no matter what you want to call it.

phrogs
10-13-2009, 12:18 PM
I never attempted to embarass you I stated fact that the LT5 doesnt have valve covers and I asked you to be specific on what you needed as far as the intake, The heads are machine matched to the cam covers they can not be swaped around they are specific to each other. I figured you just didn't know they were like that, you replied Semantics :blahblah:



After that yes I offered you 2 valve covers for 1500 a piece they would of course include the heads.


More and more new owners come in here asking for parts and use old nomentclature I was helping you with the nomenclature for this motor I didn't have a clue when I bought mine I was giving you instruction on the names and you obviously didn't give a rats *** so don't blow smoke up mine.

You want parts for your 94 motor I was helping you with that, you ask me for a valve cover there isnt a valve cover on this car.

There are cam covers matched to cylinderheads, there are air intakes the plastic parts air filter housing, then the throttle body, then the plenum, then the injector housings.





If you insist on being the Messiah of Corvettes and correcting everybody, doing it in an email was one thing. Attempting to embarass me on an open forum is another. But I thank you in advance, it is always good to know who not to do business with.