Pilot bearing puller

[LGAFF]

Anyone have the name of A Pilot bearing puller that works......

Thanks

[Jeffvette]

Any universal slide hammer set up should work.

[Wide_One]

http://i10.photobucket.com/albums/a118/Wide_One/IMG_0001-1.gifhttp://i10.photobucket.com/albums/a118/Wide_One/IMG_0002.jpg

This is what I made up.....slide hammer from Napa Auto Parts interface slide hammer threads to puller fine threads bolt from general hardware and puller from auto zone. The puller forks will need a little custom filing.

[Jagdpanzer]

I used this puller from HF that worked perfect after first trying rental puller from Advanced Auto which broke a fork.

http://www.harborfreight.com/cpi/photos/95900-95999/95987.gif

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95987

[Wide_One]

I used this puller from HF that worked perfect after first trying rental puller from Advanced Auto which broke a fork.

http://www.harborfreight.com/cpi/photos/95900-95999/95987.gif

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95987

Even better!

[Toyvet1]

Lee I have a basic one in the toolbox that Ive used on the Z a couple times if you need it. I work out of Barrington if your interested.

[LGAFF]

That Boetch is out! Used the blind puller...thanks for the advice everyone!

Best part is the Crank plug is in place and not moved at all:thumbsup::cheers::dancing