PDA

View Full Version : Oil Pan gasket for 94

secondchance
06-24-2009, 10:28 AM
I went to jerrysgaskets.com and found oil pan gasket for later cars are under development. Are they different from early cars? (I guess...).

Jerry,
Any idea when you will be selling these?

Thanks.
Pete
06-24-2009, 01:51 PM
Call Flatout or www.flatoutgroup.com (http://www.flatoutgroup.com)


Have it on my Z and a couple big inch motors no issues.
Should cost around $30.

Pete
secondchance
06-24-2009, 02:16 PM
Call Flatout or www.flatoutgroup.com (http://www.flatoutgroup.com)


Have it on my Z and a couple big inch motors no issues.
Should cost around $30.

Pete

Thanks.
Pete
06-24-2009, 03:55 PM
Your Welcome.
Ask for the .030 thick gasket.

Pete
A26B
06-24-2009, 04:36 PM
I have not yet ordered the tooling to be made for the 405hp pan gasket. Yours is the first inquiry I've had since startup slightly over a year ago. The reason I haven't proceeded is because of the high cost to produce & extremely low sales volume. I have plans to produce the pan gasket but have been purposly delaying until I get closer to getting even on the gasket biz.

Hopefully, I can add the 405hp pan gasket to the product list by the end of the year. Wish I could help you out now, but it's just not practical yet.
bobbyhi
06-24-2009, 06:54 PM
Thought you were on vacation!!:icon_scra:mrgreen:
secondchance
06-24-2009, 08:37 PM
I have not yet ordered the tooling to be made for the 405hp pan gasket. Yours is the first inquiry I've had since startup slightly over a year ago. The reason I haven't proceeded is because of the high cost to produce & extremely low sales volume. I have plans to produce the pan gasket but have been purposly delaying until I get closer to getting even on the gasket biz.

Hopefully, I can add the 405hp pan gasket to the product list by the end of the year. Wish I could help you out now, but it's just not practical yet.

No problem. I will get it from Flatout.
Thought I would check w/ you first.
Have a terrific vacation. Perhaps we can get together when you are in DC.:thumbsup:
A26B
06-25-2009, 12:15 AM
Thought you were on vacation!!:icon_scra:mrgreen:
Leaving Sat morning....
Jeffvette
06-25-2009, 01:08 AM
Are they different from early cars? (I guess...).



Yes the bolt pattern changed across the front. Along with some internal changes to the pan.
secondchance
06-25-2009, 09:04 AM
Yes the bolt pattern changed across the front. Along with some internal changes to the pan.

Learn something new everyday!
secondchance
06-25-2009, 01:29 PM
It seems that oil pick up seal needs to be replaced when replacing the pan gasket. Correct?
If so, would Flatout carry this also?
Jeffvette
06-25-2009, 02:29 PM
No oil pick up seal on the 4 bolt motors like there is on the 2 bolt motors.
A26B
06-25-2009, 03:34 PM
No oil pick up seal on the 4 bolt motors like there is on the 2 bolt motors.

ABSOLUTELY CORRECT! :handshak: