coilover sprind adjust tool where .....

[jonszr1]

can i get one .at a reasonable price / are they all the same or do i need some dimensions? can anyone help me out .thanx for any help :thumbsup:

[-=Jeff=-]

spanner wrench??

I got mine at Speedway Motors for around $10

[WVZR-1]

If your coil-over nuts have just tangs/notches then most any will do. The one -=Jeff=- mentions is quite inexpensive and should do. If they're just round nuts with drilled holes you might want a specialty one to keep from destroying the finish.

I had some early Carrera that used the round drilled nuts. The spanner that I have for the QA-1's I've got wouldn't catch them. The hook was to large. If you've round drilled nuts you want a Joe's Spanner with a round pin!