Eureka!!!!!!!

[vettn71]

Just finished putting the new injectors Jon sent me in my 90 Z. Perfectomundo!!!!!! :dancing Idles smooth as silk! Just to brag on Jon a bit - he had a set of Delphis set up for me (NCRS car) and they look like the originals to a T. He FedExed them to me at no charge. Super customer service. Thanks, Jon. :handshak:

Now I'm going to drop over. I've got the plenum pull to about a half hour now.

Jim

[Dave 90ZR-1]

I also just finished install a set of injectors for Jon two days ago. I went with a rebuilt set of Lucas injectors (cars has already finished NCRS judging). Injectors work great and Jon was a nice guy to work with.

[scholtmj]

May I ask how much these injectors cost and where I can get them? I need to replace the injectors on my car too.

[Hammer]

May I ask how much these injectors cost and where I can get them? I need to replace the injectors on my car too.

http://fuelinjectorconnection.com/shop/index.php?_a=viewProd&productId=165

I also have a set in #473. The car purr's again and they are a great alternative to the RC's.

[secondchance]

May I ask how much these injectors cost and where I can get them? I need to replace the injectors on my car too.

Sent you a PM with FIC contact info.

[vettn71]

The injectors I put in my 90 are not the ones Jon advertises on his website, although I would think they would run just fine, also. These were special made 95 Delphi units, I believe, and he machined the secondaries to accept the o-ring. He did not say what he would charge for these, as I was the guinea pig on this project. My goal was to has a totally stock-looking injector without the hassle of ethanol-induced failures. I think Jon has hit it square out of the park. Call Jon Banner at FIC 770.888.1662

Jim

[jonszr1]

i have a set in both my zr1s .in fact i pull a set of rcs out of the 90 to put in a set of jons . car runs better with his injectors ,jmho