Porting for 90-92 intakes

[LGAFF]

Checking interest......I will be porting a few sets of injector housings for 90-92s over the next month or so. If you are interested in sending me your IHs and Plenum, I would be able to port the plenum within 2 weeks and take your IHs in exchange with a charge of $700.00 for the porting. This way you retain the date staped plenum.


Let me know if you are interested and I can let you know when I have the IHs completed. I have done 3 plenums/IHs already, including my own, with the car producing 391 rwhp with no tune.(car has DRM chip, headers and no cats)

[Ccmano]

Lee did mine, great job! Very pleased.... can't wait to get to the dyno.
Highly recommended.
H
:cheers:

[LGAFF]

Thanks Hans interested in seeing the #s on the dyno!

[LGAFF]

Started the IHs today, you can see the difference vs stock.

stock

http://i134.photobucket.com/albums/q115/lgaff/DSCN0550.jpg



Injector boss removed.

http://i134.photobucket.com/albums/q115/lgaff/DSCN0549.jpg

[LGAFF]

Starting to get into a groove with doing these, learned alot and seemed to hit my stride with this IH Set. ....this is not the final product but I am very happy with the porting at this stage.


http://i134.photobucket.com/albums/q115/lgaff/RSCN0582.jpg

[LGAFF]

http://i134.photobucket.com/albums/q115/lgaff/RSCN0614.jpg


http://i134.photobucket.com/albums/q115/lgaff/DSCN0598.jpg


35MM ball falls through......will do a few more passes with a large flap once done.

[LGAFF]

4 more IH runners to go:

35MM fooseball in the IH:

http://i134.photobucket.com/albums/q115/lgaff/DSCN0633.jpg

[LGAFF]

IHs are about ready.....just need to go through them with flap wheel, they are at 36mm.

If no interest, I will just through them on the black car.:cheers: