PDA

View Full Version : Stock Catalytic Converter

Kb7tif
05-15-2009, 09:48 PM
Hello, No problems or issues. While under the 92 Z, I noticed that the flange for the drivers side Cat, well the holes are very much off center and 2 maybe 3 bolts would ever go in, Has anybody else seen this on their cars?
jonszr1
05-15-2009, 11:49 PM
pics would help
Kb7tif
05-16-2009, 12:31 AM
http://i261.photobucket.com/albums/ii68/illenema/head.jpgpics would help

Here is a pic I borrowed from this forum.. this is a header install but my car has a similar situation on the Stock cat driver side, just curious.
secondchance
05-16-2009, 12:34 AM
Are we talking about OEM exhaust manifold? Or cats?
Kb7tif
05-16-2009, 12:36 AM
just as pictured
secondchance
05-16-2009, 09:05 AM
Are you saying you have 2 holes not lining up between exhaust manifold flange and thread for the bolt on the block w/ bolts missing?
Both 91 I had and 94 I have now do not have this issue.
jonszr1
05-16-2009, 10:03 AM
had this problem on my 90 .i loosened all the bolts and things then lined up.
Kb7tif
05-16-2009, 10:44 AM
had this problem on my 90 .i loosened all the bolts and things then lined up.

Thanks for reply. While im under there today ill get a pic of the actual flange on my car, not as bad.
Just curious if that came out of the factory like that. Eventually the motor is going to be shipped off the Marc h for a overhaul will tackle that then.