pile of parts for sale check out the pics and see if you need anything

[phrogs]

If you see something you would like let me know and we can then talk about the price :mrgreen:
My dog is not available and the speakers are not available because none of them work.

These are big so Im making them links so you can zoom on them
and feel free to look at my other photos if it will let you I have a bunch of parts to sell.
http://i150.photobucket.com/albums/s103/zr1salvage/parts/th_pumps.jpg

http://i150.photobucket.com/albums/s103/zr1salvage/parts/th_IMG_1356.jpg (http://s150.photobucket.com/albums/s103/zr1salvage/parts/?action=view&current=IMG_1356.jpg)

http://i150.photobucket.com/albums/s103/zr1salvage/parts/th_IMG_1361.jpg (http://s150.photobucket.com/albums/s103/zr1salvage/parts/?action=view&current=IMG_1361.jpg)

http://i150.photobucket.com/albums/s103/zr1salvage/parts/th_IMG_1353-1.jpg (http://s150.photobucket.com/albums/s103/zr1salvage/parts/?action=view&current=IMG_1353-1.jpg)

http://i150.photobucket.com/albums/s103/zr1salvage/parts/th_IMG_1352-1.jpg (http://s150.photobucket.com/albums/s103/zr1salvage/parts/?action=view&current=IMG_1352-1.jpg)


http://i150.photobucket.com/albums/s103/zr1salvage/parts/th_IMG_1364-1.jpg (http://s150.photobucket.com/albums/s103/zr1salvage/parts/?action=view&current=IMG_1364-1.jpg) <<< these braces are specific to the ZR-1 rear bumper these support the outboard corners.

http://i150.photobucket.com/albums/s103/zr1salvage/parts/IMG_1360.jpg

[cvette]

How much for the heat sheilds and the exhaust hangers?

Charlie

[LGAFF]

Plenum price?

[cvette]

Is the plenum also available?

[XfireZ51]

Do you have the clip that holds the fuel lines. It attaches to the top of the heater box.

[phrogs]

How much for the heat sheilds and the exhaust hangers?

Charlie


For the hangers and the heat shields, $70 plus shipping I think these hangers are about impossible to find.


The plenum is available go ahead and look at this picture, this plenum could be fix but It would make a great wall art piece.

Id like $300 for this plenum


http://i150.photobucket.com/albums/s103/zr1salvage/parts/plenum.jpg

[phrogs]

Do you have the clip that holds the fuel lines. It attaches to the top of the heater box.


I have it somewhere and I didn't find it today but I know I have it, ill let you know.

[-=Jeff=-]

How much for the interior door bezels?

Also I assume the 2ndary pump is for a 1990.. curious on the cost for that too

[Demps]

Air filter screws (center one specifically)

small screws that hold the throttle cable to the plenum.

nuts for the ecm.

nuts for the throttle (tps, cable attachment) body cover.

left rear fender wheelhouse liner. condition?

[phrogs]

How much for the interior door bezels?

Also I assume the 2ndary pump is for a 1990.. curious on the cost for that too


How does $50 sound for the bezels with lights

The vacum pumps are both from a 90 both are bad the top where the switch is at is corroded and are sold as is for parts not in working order.
ill take $60 for the pump because I think it can be repired.

[phrogs]

Air filter screws (center one specifically) Ill look at these I think the two I have are the outboard ones.

small screws that hold the throttle cable to the plenum. Ill check

nuts for the ecm. I have them

nuts for the throttle (tps, cable attachment) body cover. Ill chekc

left rear fender wheelhouse liner. condition? I have them but Ill have to look at the condition.

[GOLDCYLON]

Johnny if you find more of the plenum throttle cable retaining clamps I need those as well that ride on top of the plenum.

[-=Jeff=-]

prices are good..

BUT.. looks like I may need a dipstick tube first..do you have one?

[phrogs]

prices are good..

BUT.. looks like I may need a dipstick tube first..do you have one?


I do not have a extra dip stick tube, sorry

[-=Jeff=-]

I do not have a extra dip stick tube, sorry

No problem.. Thanks Bro.. I will let you know when I am ready for the Bezels.. btu if you sell them before then no worries here.

don't need to hold them for me

[rebelz]

Price for upper left Control Arm?
Rich

[phrogs]

Price for upper left Control Arm?
Rich

I was asking $75 each plus shipping.

[rebelz]

I was asking $75 each plus shipping.

Any idea what shipping an upper would be to Anchorage, Alaska, Parcel Post? A .7 lb 8"x8"x8" package just cost me $28.30 UPS Ground, Way too dam# much.
Rich

[phrogs]

Any idea what shipping an upper would be to Anchorage, Alaska, Parcel Post? A .7 lb 8"x8"x8" package just cost me $28.30 UPS Ground, Way too dam# much.
Rich


I have no idea but before I do that the seal on the ball joint is torn you still want it?

[rebelz]

I have no idea but before I do that the seal on the ball joint is torn you still want it?

Very interested still. All I really need is the cross bar piece, whatever that is called. I could even pay for the whole thing and have you ship only that part of it if you can press it out. I have damaged threads (my fault) on a OEM NOS Arm. Or I can press it out if the shipping isn't too bad for the whole thing.
Rich

[flyin ryan]

Just received a couple items from Johnny. Good guy to deal with, wanted to point out in case anyone has any reservations or is on the fence for any reason, :).

[phrogs]

Very interested still. All I really need is the cross bar piece, whatever that is called. I could even pay for the whole thing and have you ship only that part of it if you can press it out. I have damaged threads (my fault) on a OEM NOS Arm. Or I can press it out if the shipping isn't too bad for the whole thing.
Rich


Let me see what I can do ok

[rebelz]

Let me see what I can do ok

Great thanks, let me know.

[GOLDCYLON]

Johnny if you find more of the plenum throttle cable retaining clamps I need those as well that ride on top of the plenum.


Johnny have these? And for the rest the membership community I too have bought from Johnny like Ryan (A Power Steering cooler, Stainless steel lines etc) Johnny sell quality parts. GC

[Demps]

Air filter screws (center one specifically) Ill look at these I think the two I have are the outboard ones.

small screws that hold the throttle cable to the plenum. Ill check

nuts for the ecm. I have them

nuts for the throttle (tps, cable attachment) body cover. Ill chekc

left rear fender wheelhouse liner. condition? I have them but Ill have to look at the condition.





Standing by.

[XfireZ51]

Anything on the fuel line bracket attached to the heater box?

[phrogs]

Hey Guys Im digging through all my stuff, but im not to sure about the small parts for the throttle cable covers but Im looking, the one for the gas lines I have them just need to find them.

jp

[rebelz]

Let me see what I can do ok

Johnny
I have been able to repair the outer one and a half threads of my OEM NOS Control Arm, so thought I'd let you know that I no longer need the one you have. Thanks for checking into my request.

Rich

[XfireZ51]

Anything on the fuel line bracket attached to the heater box?

I responded to your PM. anything further on this? :confused:

[Tyler Townsley]

You have the rubber seal that goes under the gas door assembly?

Tyler

[CobraMan]

Do you or anybody have a gas tank sending unit with or without pumps? Thanks Monroe

[phrogs]

Do you or anybody have a gas tank sending unit with or without pumps? Thanks Monroe


Yep I sure do send me a PM

havent heard back from you

[DMark]

Hey Johnny,

Do you still have that air filter lid that is in the picture?

[phrogs]

Hey Johnny,

Do you still have that air filter lid that is in the picture?


Yep $50 plus shipping.