Cam Cover Emblems

[LGAFF]

Talked to a company today that makes enamel emblems, they looked at the cam cover emblems and said they can make them, just need to check and verify heat resistence. tooling fees are minimal.

Any interest.....I do not think the cost will be much or am I chasing something that has been addressed.

[tccrab]

JeffVette has a limited supply of aftermarket ones that he's selling, but I don't know if he has enough to meet future demands.
He's hand painting them, and from what I've seen they look pretty sharp.

TomC
"Crabs"

[VetteMed]

I'd buy a pair.

[DaveK]

I don't especially need any right now but would be happy to sign up for a couple to help the cause.

[LGAFF]

I will want to make sure these hold up and are good first. If they look like crap, will just let it go....they were very interested when I sent it to them. I will have a tooling cost of about $100.

The adhesive might be the biggest challenge.

They may also be able to do key chains from the emblem, two sided, maybe with 3/4 digit VINs on the back, alot of options.

I will get the material info first. Price should be very very reasonable but let me confirm first.

[GOLDCYLON]

They may also be able to do key chains from the emblem, two sided, maybe with 3/4 digit VINs on the back, alot of options



:thumbsup: Keep us posted Lee im interested in the listed above aspect of the project.

[Pete]

Lee,i kept my OE emblems off my cam covers this time,was going to buy a set of aftermarket.

If you get these done at a decent price i also am interested.

I would love to get a key chain version with year and VIN :thumbsup:

Black high temp RTV works great.

Let me know.

Pete

[tf95ZR1]

Great Project!
I'm interested!

[RedSled]

Cool!

[LGAFF]

Company confirmed today that the cam emblem can he made with high temp enamel and would do fine with underhood temps. I need to get a cam emblem to them and they will send it over to build the die.

If interested we can incorporate the 3/4 digit VIN...other things we can have made:

-Coins with Vin stamp on back
-Key chains
-Bottle openers

Start up cost will be $125, they will send me a sample...colored sections will be done with enamel and the body will be black nickel finish.

Let me know your thoughts

[VetteMed]

Sounds good, The 3/4 digit number being available is a neat idea. Keep us posted -- we want pics when you have one in your hands! :cool:

[LGAFF]

Emblem is on its way overseas to see if they can copy it, including the slight curve

[A26B]

Sure hope this turns out! Thanks for the effort Lee.

[LGAFF]

just got a note, they can match the curve on the emblem!

[LGAFF]

Example of their work:

http://i134.photobucket.com/albums/q115/lgaff/6ca8121e6a4df1162f6e9f03e6323023.jpg

[VetteMed]

Example of their work:


Wow. Looks like that'll work :thumbsup:

[LGAFF]

Looks like they are preparing to stamp these out, should have pics soon and hopefully some samples to test.

I am looking at about $15.00 per emblem by the numbers they have given me now. I am going to do 90 emblem first, as I need to pay a set up fee for each version and want to make sure these look good.

Does the price seem fair if emblem looks good?

[Paul Workman]

Looks like they are preparing to stamp these out, should have pics soon and hopefully some samples to test.

I am looking at about $15.00 per emblem by the numbers they have given me now. I am going to do 90 emblem first, as I need to pay a set up fee for each version and want to make sure these look good.

Does the price seem fair if emblem looks good?

Sounds good to me! I especially like the key-chain idea! I have a 4-digit #, so the 3-digit does not appeal per se.

P.

[carter200]

Price sounds fair and when you get the 1995 model done put me down for 2 :cheers:

[Pete]

Lee, at that price i will take 4 (2 sets).

I'll keep my stock ones, between the stock emblems and ECM cover a few more years i will be the next Bill Gates :dancing

Pete

[DaveK]

I'll take a couple too

[A26B]

Lee,
When you get to the late model design, I'll take 8 (4 sets)
Jerry

[Aurora40]

Count me in as interested in the '90 emblem. But it's gotta look GOOD! Mine are not that bad. The hand painted ones are certainly better than a bad emblem, or no emblem, but most of them look hand-painted. Not meant as a knock, but I'd love to get ones that look just like new, but don't cost an arm and a leg. :)

[LGAFF]

Well, we are about 2 weeks from samples being sent out, these will mad eof aluminum and coated in cloisonne enamel, which is the same stuff BMWs emblems are coated with on the older cars before they went to plastics, etc

[-=Jeff=-]

I want 2 90 ones.. saves me from refinishing mine

[tccrab]

Lee:

Count me in for a pair for my '90.
Don't really need 'em, but what the heck, might as well have a new set for when Jeffie & LocoBob P&P&PC's my top end.
:mrgreen:

TomC
"Crabs"

[LGAFF]

They sent me the quote, they originally wanted to use the same paint that the emblem came with, but unlikely it would last. i asked that they try to more expensive paint as they said is was "super hard"

It will cost me an extra $2 per emblem, but I will eat that cost.

Only concern is that they might look better (More high line) than originals, which might be a negative.

Thoughts?

[-=Jeff=-]

They sent me the quote, they originally wanted to use the same paint that the emblem came with, but unlikely it would last. i asked that they try to more expensive paint as they said is was "super hard"

It will cost me an extra $2 per emblem, but I will eat that cost.

Only concern is that they might look better (More high line) than originals, which might be a negative.

Thoughts?

For OEM, a negative, but for me that will look good!!

[Paul Workman]

They sent me the quote, they originally wanted to use the same paint that the emblem came with, but unlikely it would last. i asked that they try to more expensive paint as they said is was "super hard"

It will cost me an extra $2 per emblem, but I will eat that cost.

Oh, hoss fethahs! $2 is not a big overrun.:thumbsup:

Only concern is that they might look better (More high line) than originals, which might be a negative.

Thoughts?

I'm down for a pair (90s), and I'd be interested in the key-chain bob too, if that is also in the mix!;)

And, thanks for taking the time to run this down. I'm looking forward to the set!

P.

[QB93Z]

Lee, I am interested in a pair of emblems for a '90.

Thanks for taking the time and effort to make our cars look better.

Jim

[LGAFF]

I hope they turn out, but can't help but think this should be easy for them.

example"

http://i134.photobucket.com/albums/q115/lgaff/e1c7762a833b2323b40ac51d00132d45-1.png

[Emilee]

Put me down for a 90 set and a 91 to 95 set.

[Toyvet1]

Ill take a set of 90's

[jonszr1]

i would like 2 sets please . tell me where to send the ck.thanx for doing this .sure is nice of ya

[vettn71]

Lee,

Sign me up for a pair of 90s

Jim

[RICKYRJ1]

I'l take 2 sets, 1 for my 95 and 1 for the future 95 ZR1 I pick up.:thumbsup: Thanks, let me know where to send the $$$$

[flyin ryan]

Hey Lee, I'll get some from you when you 'Officially' start taking orders, once the trial's have been approved & whatnot. Like everyone else, Thanks for making time :hello:.

[A1990]

Hey Lee, I'll get some from you when you 'Officially' start taking orders, once the trial's have been approved & whatnot. Like everyone else, Thanks for making time :hello:.

I am with Ryan. Let me know when you start taking orders.

[LGAFF]

If you need an atomic orange emblem, might be able to swing that for a few extra bucks

[A1990]

If you need an atomic orange emblem, might be able to swing that for a few extra bucks
Interesting. I would go for a set of 90's and a set with the atomic orange emblem.

[TommyL]

Would be cool to have custom Registry Emblems made....something like ZR-1 on the left side and Net Registry on the other or even something totally different. We can have the factory ones reproduced but it might be kinda cool to have something else made up.

[LGAFF]

Delvery date of 6 test emblems looks to be 6/20

[Z51JEFF]

I just repainted mine,not correct but it works for me.http://i10.photobucket.com/albums/a136/FLYTYM/DSC00193.jpg

[-=Jeff=-]

I just repainted mine,not correct but it works for me.http://i10.photobucket.com/albums/a136/FLYTYM/DSC00193.jpg

Looks good, what paint did you use?

[Z51JEFF]

Looks good, what paint did you use?

I used Dupont single stage for the black,model paint for the white and the Bowtie is a sticker I had made.

[-=Jeff=-]

I used Dupont single stage for the black,model paint for the white and the Bowtie is a sticker I had made.

Model paint..

PERFECT.. will start on one of mine then

[brodykelly]

i'll take a couple sets also when available [93] thanks for the effort... brody p.

[Z51JEFF]

Model paint..

PERFECT.. will start on one of mine then

The only model paint was the white and thats because it looked the best out of all the white paint samples I tried,the black is single stage Dupont from the Nason line.Heres a few pictures on the car,they came out really nice.I tried pretty much everything I could think of to get the red outline for the Bowtie but couldnt get it to look right.Id like to do a 90,Im pretty sure I could get it right. http://i10.photobucket.com/albums/a136/FLYTYM/DSC00199.jpghttp://i10.photobucket.com/albums/a136/FLYTYM/DSC00196.jpg

[-=Jeff=-]

yeah I had some 'automotive' black, then I used model paint (after you mentioned it) for the white and the red (90 emblem) I need to go get gold though, as I did not have any. then one emblem will be done

[4DSZR1]

They came out out nice.... you know Testors model paints use to make something that looked like a felt marker except with enamel. That might work on getting the bowtie outlined in red... I'll look at the hobbyshop next time Im there and get an orange and red.

Rick

[secondchance]

The only model paint was the white and thats because it looked the best out of all the white paint samples I tried,the black is single stage Dupont from the Nason line.Heres a few pictures on the car,they came out really nice.I tried pretty much everything I could think of to get the red outline for the Bowtie but couldnt get it to look right.Id like to do a 90,Im pretty sure I could get it right. http://i10.photobucket.com/albums/a136/FLYTYM/DSC00199.jpghttp://i10.photobucket.com/albums/a136/FLYTYM/DSC00196.jpg

Was the motor refinished? Simply looks stock and beautiful!
Also, is your ECM cover stock? Quite different from later car. I had a 91 but cannot recall how that one looked-been 13 years...

lastly, are these emblems glued on?

[Z51JEFF]

Was the motor refinished? Simply looks stock and beautiful!
Also, is your ECM cover stock? Quite different from later car. I had a 91 but cannot recall how that one looked-been 13 years...

lastly, are these emblems glued on?

The emblems are glued on with black RTV sealent.The ECM cover is painted with black ZOLOTONE 20-06 and I made the smaller panel on the front,I also painted the ECM bracket.The cam covers had some very minor stains in a few places.The worst place was around the area by the driver cam cover emblem,the more I tried to get the stain off the worse it got so I mixed up some paint ,used my air brush and fixed it.Other than that the motor finish is stock.Heres a picture of the ECM bracket.http://i10.photobucket.com/albums/a136/FLYTYM/DSC00215.jpg

[-=Jeff=-]

my attempt.. not perfect but better
http://vettextc.jiminees.com/ZR-1/Emblem/images/DX6490_90.jpg

http://vettextc.jiminees.com/ZR-1/Emblem/images/DX6490_93.jpg

[AtsZR1]

I would like 4 (2 sets) for my 91. Thanks for the efforts!

[FNG90-195]

Lee

I would like 2 for my 1990. Please put me on the list and give me a shout when you want some $.

Thanks

Mark

[ScottZ95ZR1]

I would also like to get on the list for a set, Lee. Thanks very much for making this happen !

[Scrrem]

Put me down for a set :thumbsup:

Rich

[VetteMed]

2 sets please!

[LGAFF]

Thanks for all the support.....once I have pics I will post.

[scholtmj]

I'd take 2 for a 91'

Smoke'n deal! =D>

[LGAFF]

Original on the top....alittle communication problem with our foreign friends.....they thought the out emblem was silver.....it needs more curve, and also it needs to be alittle golder in the emblem.




http://i134.photobucket.com/albums/q115/lgaff/09041603.jpg

[LGAFF]

Obviously i will have them make changes....might also have them do the 92-95 once I see they have matched the curve.


Let me know if there are any other change suggestions.

[QB93Z]

WOW, that is pretty Lee. When you get the final details figured out, you will have a nice product.

I would be interested in a version that is not curved so I can attach it to my tool box.

How about a Christmas tree ornament? How about a necklace? Don't you hate it when people "help" you with you product development.

Jim

[-=Jeff=-]

Looks good, But the bowtie is a touch too tall I think

[Aurora40]

Looks good, But the bowtie is a touch too tall I think

I think it might be that the black border isn't thick enough. The total dimension looks similar though.

Nice looking emblem! A few tweaks and it'll be hard to tell which is which (except that one looks new)

[LGAFF]

I sent in the change requests......for $15 I think it will be darn close and a pretty good deal.:cheers:

[Jagdpanzer]

LGAFF,
Looking good.
Put me down for a set for a 94.

Phil

[hiperf406]

I'll take 2 let me know when you require payment. TIA lorne #1748

[LGAFF]

Here is the response from the emblem company......looks like for some reason the ridge/ring has to be soft enamel.....see my note, I think I can coat the emblem in high temp paint and "seal the soft enamel.....your thoughts?

I have heard back from the manufacturer. Let me know if you have any questions and what you think so that I can get back to them.

1. We can curve the emblem more.: Curve needs to match exactly if possible

2. The emblem can't be painted black with the hard enamel. If you need it paint black, we will need to use soft enamel, which is same as the sample, and it can't bare the heat well. Pls note. This could be an issue, I wonder if they use soft black, maybe I can then coat that in high heat clear coat.....might preserve the black.

3. The yellow cross was same size as the sample; it looks wider because the colors are full and flat on the cross. The sample is recessed with color, so it looks like ours bigger than the sample. How do you think? Pls advice. Thank you.
ok


4. I am afraid that we don't have many choices on the colors. The hard enamel (solid powder) is different from imitation hard enamel (mix by different colors). I found two colors that close to the color in the cross of the sample. But they are transparent colors, not solid colors. Will that be ok? pls see attached and let me know which one you need. Thank you.

237 looks correct

Thanks.....

[LGAFF]

http://i134.photobucket.com/albums/q115/lgaff/hard20enamel202371.jpg


how is this for bowtie color

[LGAFF]

Here is the emblem with the color 237 cut and pasted into the bowtie.....keep in mind it will be flat the color template has a pattern

http://i134.photobucket.com/albums/q115/lgaff/Emblem1.jpg


Here is side shot of thickness.....this is prebend:

http://i134.photobucket.com/albums/q115/lgaff/side.jpg

Chance I may get the detail work done, have them sent to me and the paint the ring black with high temp.....they did tell me original paint is soft enamel on the OEM.

[LGAFF]

Latest update......

They are going to use the same enamel that was on the OEM emblem, I will then seal the emblem with ceramic paint when I receive.....I will also test the emblem under high heat.

Using the same as OEM paint allows them to color match everything.

The outer ring is being checked for width and will be adjusted if needed.

Christ this is a pain in the A$$.....I hope this pays off!

Thanks for your patience and support!:hello:

[DaveK]

Thanks for all your efforts. I know that the members will appreciate it - I certainly do!

[VetteMed]

Thanks for the updates on this project - can't wait to see the finished product!

[Pete]

Lee, for the price i think they look awesome :thumbsup:

Will clear coat yellow with engine heat?

If the OE paint held up for 15 years i would think these will hold up for at least 5.

Pete

"Beggers can't be choosy"

[LGAFF]

Here is the update: they are retooling

Here is the order information:
Die struck brass soft enamel emblem
2.5"
Dying black plating
Curve as the sample
Gold paint on the cross
Wider border
2 cut-out

Estimated finish date July 3rd.

[limey]

lee,

I'll take 20 emblems when they are finished, off course , this depends on the likeness of the OEM's. I do like the way the vendor and yourself keep going back and working with the problem, i think this will only benefit everyone.

Kurt

[LGAFF]

anyone have a heat gun to check how hot the cam cover gets?


I am going to test them coated in cermaic and uncoated to see how they do....the paint used on these is the same as OEM.

[flyin ryan]

anyone have a heat gun to check how hot the cam cover gets?


I am going to test them coated in cermaic and uncoated to see how they do....the paint used on these is the same as OEM.Thanks again for your effort Lee :thumbsup:. As far as how hot the cam cover gets...kind of an open question to some degree. If a guys in Florida & his Rad is dirty, could run around 240º/250ºF, where as a guy in your neck of the woods with a proper running temp. Zee would be more like in the 200º/215ºF range. So how much of a factor do you want to build in? If the emblem can handle upwards of 250ºF, that's pretty warm already...would be nice to have a used/beat-up emblem to use as a test mule to fire up.

[LGAFF]

soo if I leave it at 350-400 for 2hrs...,,that would be a solid test? Any thoughts?

[bobbyhi]

If there is a failure at those temps then I would lower the temps to 300 degrees max and re-test. Shouldn't need more than a "cushion" of 50 degrees. I shot my temp gun last weekend of 90 degree weather and the covers were 205 degrees.

[flyin ryan]

300ºF should be 'Lots'.

[Jagdpanzer]

I would not expect these emblems to see more than 225º F even in the higher temp climates.

[bobbyhi]

I would not expect these emblems to see more than 225º F even in the higher temp climates.


I would suspect that you are correct - however, there should be some "fudge" factor built in to the max temp range.

[flyin ryan]

I would not expect these emblems to see more than 225º F even in the higher temp climates.Not a lot of air movement under the hood of these things...I could realisticlly see more than 225ºF quite easily, under the right or more correctly 'Wrong' conditions.

[LGAFF]

How is this:

http://i134.photobucket.com/albums/q115/lgaff/007.jpg

http://i134.photobucket.com/albums/q115/lgaff/001.jpg

Curve:
http://i134.photobucket.com/albums/q115/lgaff/006.jpg

[-=Jeff=-]

Those look AWESOME

[limey]

I think you have a winner!

Put me down for 30 sets!

[carter200]

The circle looks thicker. All else looks great.

[LGAFF]

6 test versions are coming to me, they offered to make the cirlce thinner....I will see how the current version works....also we will get stared on 91-95 version.

[carter200]

When you get the 91-95's done I'll take 5 sets instead of my original order, thanks :cheers:

[Pete]

Lee,looking phuking great.:thumbsup:

Can't wait for later ones.
My covers are naked without them.

Then you can start on chain tensioners :)

Pete

[Jeffvette]

I can tell you the version you have will not fit great, which is one reason why I stopped selling the repops. The casting changed and the emblems would not lay flat.

Make sure the bend is right as well.

[LGAFF]

I can tell you the version you have will not fit great, which is one reason why I stopped selling the repops. The casting changed and the emblems would not lay flat.

Make sure the bend is right as well.


Thats why I an test fitting them. I guess I won't shoot then down until I have one in my hand.

Also using and adhesive gel instead of backing will allow for some variance. I doubt that there was not varience in the OEMS.

[LGAFF]

Also, to be clear, if they are not acceptable, I will not sell them. I
do not need the money, I am paid very very well for my regular job and I would have to sell alot to recoup my current expenses, and then, trust me, the profit on these is marginal at the price I listed.

I am just trying to get a decent product on the market at a good price.

[bobbyhi]

Also, to be clear, if they are not acceptable, I will not sell them. I
do not need the money, I am paid very very well for my regular job and I would have to sell alot to recoup my current expenses, and then, trust me, the profit on these is marginal at the price I listed.

I am just trying to get a decent product on the market at a good price.

Regardless of the outcome, we all appreciate the time, money and effort that you have put in. Thank you.......:handshak:

[Toyvet1]

Great job Lee , get the hose's set going and your on your way. They look great!

[carter200]

Regardless of the outcome, we all appreciate the time, money and effort that you have put in. Thank you.......:handshak:

I second that :thumbsup::thumbsup::thumbsup:

[LGAFF]

http://i134.photobucket.com/albums/q115/lgaff/005.jpg


I missed this shot they look pretty damn close

[HIZNHRZ]

Very nice! Great job and thanks for all of your efforts.

[Pete]

Lee,i still want a set for my 91,i can live with not so perfect it will look better then nothing.

Pete

[LGAFF]

Pete, I will get them perfect, then mark them up to $50 per:mrgreen:

[ZZZZZR1]

Lee,


Awesome job! Count me in for 2 (91 to 95's).


Paypal ok?

Thanks!

David

[LGAFF]

Test Emblems arrive today....

[GOLDCYLON]

I would not expect these emblems to see more than 225º F even in the higher temp climates.


In Arizona 225F is very easy to hit when the car is idling in traffic on the roadway. 300F would be safe

[XfireZ51]

Lee,i still want a set for my 91,i can live with not so perfect it will look better then nothing.

Pete

Pete,

Isn't nothing better from a weight perspective? Could cost a few 10,000ths WITH the emblems on.

[LGAFF]

They are pretty damn nice:

http://i134.photobucket.com/albums/q115/lgaff/DSCN0676.jpg

http://i134.photobucket.com/albums/q115/lgaff/DSCN0678.jpg

http://i134.photobucket.com/albums/q115/lgaff/DSCN0681.jpg

[LGAFF]

http://i134.photobucket.com/albums/q115/lgaff/DSCN0683.jpg

Top shot: the curve is pretty well matched

[GOLDCYLON]

Look damn Nice Lee, I'd say you are getting pretty darn close.

[LGAFF]

Maybe we can get the FBI together this week, get the FBI seal of approval and start production for 90, 91-95s

[carter200]

Lee,
Well dunn :thumbsup: They look sweet. Now let's get those for the 95 dunn, too :dancing:dancing

[DMark]

They are pretty damn nice.....
:thumbsup:

Well Done!!!

[limey]

They look the tits! Let me know how you'll be want to be paid and estimated delivery time.

[LGAFF]

On the car:

http://i134.photobucket.com/albums/q115/lgaff/DSCN0684.jpg

http://i134.photobucket.com/albums/q115/lgaff/DSCN0685.jpg

http://i134.photobucket.com/albums/q115/lgaff/DSCN0686.jpg

Next to worn out old elmblem:

http://i134.photobucket.com/albums/q115/lgaff/DSCN0688.jpg

Is this acceptable? if so I will place an order for 100 to start.

[Toyvet1]

Look great Lee, if they look half as good in person you have a winner!

[bldavis11]

Is this acceptable? if so I will place an order for 100 to start.

I'm in for 2 pairs (4 total) of the 91-95's! Just let me know how you want to $.

Thanks for all the hard work on this. A real life saver.
Ben

[LGAFF]

Just sent a note to get the 91-95s started:thumbsup: Should just be a paint change!

[tomtom72]

:jawdrop:WOW Lee, those look great! :thumbsup:

Thank you for going thru all this for our cars!

I would like to order two of the 90 emblems, please. Thank you.:mrgreen:

[jmascharka]

:worship: Wow, they look nice...put me down for a pair for a 92...let me know when you want the payment.

[VetteMed]

I'm in for 2 pairs! (91)... I want to have a spare so I can swap em after I get the top end ported/powdercoated! Thanks Lee!

[Eric870]

Nice job Lee! Put me down for a set of the 90's.

Thanks
Eric

[4DSZR1]

They look the tits! Let me know ......and estimated delivery time.

I have the same question to YOU on the item I bought from you on ebay? How come no reply to my email? :cool:

Thanks

[LGAFF]

I did the heat test today cranked it up to 400 and paint held up...although this is not a complete test as it is not warming and cooling. I decided that I am going to coat in high temp clear.

Also I noticed that the edges on the outer ring on some samples were sticking out too much, this was keeping the emblem from sitting perfectly flush. I am going to have them take .25MM off the edge and these will be perfect.

This is a simple fix but I would rather avoid quality issues.

[xlr8nflorida]

I did the heat test today cranked it up to 400 and paint held up...although this is not a complete test as it is not warming and cooling. I decided that I am going to coat in high temp clear.

Also I noticed that the edges on the outer ring on some samples were sticking out too much, this was keeping the emblem from sitting perfectly flush. I am going to have them take .25MM off the edge and these will be perfect.

This is a simple fix but I would rather avoid quality issues.

I'll take a set or two.

[LGAFF]

Well, I am testing coatings, I added the emblems to my 90 ZR-1, one side completely coated in VHT ceramic paint, and the other in wheel paint, but I did not coat the checked flag or the red.


So far both held up through a 30 minute drive...no bubbling, yellowing or other. I hope to have completed more coating testing prior to the final revision.

Interesting note, the cam emeblem provisions from left to right, drivers side is bigger, passenger side smaller. The current version I have made fits perfectly on the drivers side, passenger side is slightly too large(which is why they are modding)

[Aurora40]

Wow, those really look good! Nice work in tweaking them to get the just right! When you are ready to take orders, I'm definitely in. :)

[RICKYRJ1]

You have gone way beyond the call of duty on getting these things done. A true asset to this small community. THANKS :thumbsup: I'll take 3 sets for a 95'

[billybaloneey]

You can add me to you list for a pair for my '94.

[902066]

If this is the official order list, please put me down for a pair of 90 emblems. If you are not ready yet let us know when to order and how to pay. Thanks for your efforts.

[carter200]

Interesting note, the cam emeblem provisions from left to right, drivers side is bigger, passenger side smaller. The current version I have made fits perfectly on the drivers side, passenger side is slightly too large(which is why they are modding)

Lee,
Looks like you need to sell a right and left side emblem to have perfect fit on both sides. Great work :thumbsup:

[ZR1@LAST]

Lee,

Please put me down for 2 for my 90.

Thanks for all your efforts :cheers:

Jeff
90 ZR1

[96LT4]

I'd do 2 sets depending on the price for a pair of 91 Zs. :wave:

[LGAFF]

90 Emblems should be in production in a few days, the 91-95 are going to take some work. Looks like painting the chevron will be difficult, and I need to pay them a separate fee to retool ........good chance the chevron will be recessed in a red outline.

They should have a few proposed solutions in the near future.

[LGAFF]

Well, I have logged about 100 miles with the emblems on....one side is VHT 2K degree clear over the entire emblem. The other is only VHT clear on the outside of the emblem, and none on the red banner or checkered flad.

No yellowing or peeling on either. Car also sits outside so subject to damp, etc. Both look the same as the day they went on.

Just waiting on 90s to be finsihed with slight mods and then shipped.

[ZR1@LAST]

Well, I have logged about 100 miles with the emblems on....one side is VHT 2K degree clear over the entire emblem. The other is only VHT clear on the outside of the emblem, and none on the red banner or checkered flad.

No yellowing or peeling on either. Car also sits outside so subject to damp, etc. Both look the same as the day they went on.

Just waiting on 90s to be finsihed with slight mods and then shipped.

I posted a while back I wanted 2 emblems, I just want to make sure I am on the list for the 1st 100 :pray
Either way, I want 2 and thanks again for all your efforts =D>
Do you need payments before shipping?

Thanks,
Jeff
90 ZR1

[LGAFF]

I will let everyone know when they are ready.

I am getting 100 emblems on the first run for 90s

[ZR1@LAST]

I will let everyone know when they are ready.

I am getting 100 emblems on the first run for 90s

Thanks again :thumbsup:

Jeff
90 Zr1

[tomtom72]

Lee, thanks for doing this!:thumbsup:

If you would like to be paid now for my pair, I'll send the cash asap. Just let me know how much and where to send it.

:cheers:
Tom

[W i l l]

Put me down for a couple.

Will

I will let everyone know when they are ready.

I am getting 100 emblems on the first run for 90s

[LGAFF]

400 miles, no peeling on the uncoated banner, no yellowing or peeling on the 2000 degree VHT clear. I ended up sending a damn video to get my point across to my asian friends, they get it so hopefully they will be done soon.......version 2 emblems are in the mold process.

[carter200]

hopefully they will be done soon.......version 2 emblems are in the mold process.

:dancing :dancing :worship:

[RICKYRJ1]

OK , Its official! We are all NUTS!! 142 posts & counting on Cam Cover Emblems. This is why I love this place, I blend in! LOL. Looking forward to the 91-95s when they are DUNN. Thanks again for making so many grown men happy :mrgreen::worship:

[flyin ryan]

I ended up sending a damn video to get my point across to my asian friends, If it was X-rated that might speed up the process, I hear they like that sort of thing :mrgreen:.

[tomtom72]

OK , Its official! We are all NUTS!! 142 posts & counting on Cam Cover Emblems. This is why I love this place, I blend in! LOL. Looking forward to the 91-95s when they are DUNN. Thanks again for making so many grown men happy :mrgreen::worship:

:redface: I agree!:mrgreen:

[carter200]

Git-r-DUNN :dancing

[Pete]

I saw the Emblem yesterday.
All i can say is awesome,can't tell from OE.

Great work Lee :thumbsup:

Pete

[ZZZZZR1]

OK , Its official! We are all NUTS!! 142 posts & counting on Cam Cover Emblems. This is why I love this place, I blend in! LOL. Looking forward to the 91-95s when they are DUNN. Thanks again for making so many grown men happy :mrgreen::worship:


How true. @ least you don't have a "wheel" problem Rick.

Or do you? :mrgreen:

[ZR1@LAST]

I saw the Emblem yesterday.
All i can say is awesome,can't tell from OE.

Great work Lee :thumbsup:

Pete


Great News :thumbsup:

Can't wait to get mine :-D

Thanks again, Lee :cheers:

Jeff
90 ZR1

[carter200]

What is the latest on the 95 emblems? Sure been a long time :dontknow:

[LGAFF]

Yes, they are slow I was not going to post anything until they were in my hand, but here goes. I will take delivery of 100 emblems for the 90s on 9/23.

Price uncoated will be $16 per plus shipping and handling.

If you want VHT 2K degree coating they will be $18.00 per plus shiping and handling.

If you use paypal, I will charge the going rate for the transaction, which I believe is .80 per emblem.

I will warranty them for 30 days, the uncoated will carry no waranty but I will work with you if they don't fair well. I have had a set of coated on my 90 for 1200 miles and the car has sat outside for 3 months. No issues.

The Gen II I have not seen yet, but I have been charged for a mold charge, which means they have the mold done. The chev emblem outline will be recessed as this was the best way to control the red outline.

I will let everyone know once I have the emblem and verified they fit. I will then set up a system for payment etc.

Thanks for your patience.

[carter200]

Lee,
Thanks for the update and great effort on these :thumbsup:

[LGAFF]

FYI. 90s are available

These are reproduction and not OEMS

Price uncoated will be $16 per plus shipping and handling.

If you want high temp coating they will be $18.00 per plus shiping and handling.

If you use paypal, I will charge the going rate for the transaction, which I believe is .80 per emblem.

These do not come with Adhesive but are easily attached by using RVT.

I will warranty them for 30 days, the uncoated will carry no waranty but I will work with you if they don't fair well. I have had a set of coated on my 90 for 1200 miles and the car has sat outside for 3 months. No issues

If you would like a 90 Emblem....send an e-mail to

leegaffigan@yahoo.com

Please include your 1)Address 2)Quantity you want 3)If you want uncoated, coated on the black ring only or coating of the entire emblem. I will put together the order, then an invoice will be sent to you, upon receipt of the invoice, please forward the payment to my paypal account, which I will send to you, or if you want to pay cash I will send you my address. Once I receive payment, the shipment will go out.

Thanks for everyone's patience!

[QB93Z]

Lee,

I installed the emblems on my 1990. They fit perfectly and look great! :thumbsup::thumbsup:

Thanks,

Jim

[LGAFF]

Thanks Jim,

I have been sweating this whole thing out. This is my first venture into something like this and my biggest concern is 1)making a product that lasts and is of quality 2)Not taking away from my family by spending a lot of $ on something that is a bust.

I appreciate everyone's support.

Thank You

[Eric870]

Thanks Lee. paypal sent..

[LGAFF]

They will be in the mail tomorrow.

thanks

[tomtom72]

all i can say is wow! :jawdrop:

Thanks for your effort Lee! Mine came a few minutes ago.



Guys,
These are spectacular....if you need them go for it! I doubt you will have any second thoughts after you see them in person.:thumbsup::thumbsup:

Thanks again Lee!

:cheers:
Tom

[LGAFF]

Just confirmed with the vendor who does the communication with manufacturing, when they said 160 degrees was the max temp, they meant C not F....so not sure I need to coat these if they are good for 320 degrees. I will coat them for now and test a few without.


Note Below:

Here are the temps for the paint. We used soft enamel on your emblems (we use soft enamel only, since we can't use dying black plating for the real enamel).

Epoxy: 120 Celsius
Soft enamel : 160 Celsius
Imitation hard enamel: 100-120 Celsius

[Eric870]

Thanks Lee, they look great...

[LGAFF]

Broke even on my cost for the 90s today:mrgreen:

Thanks Everyone

[tomtom72]

Broke even on my cost for the 90s today:mrgreen:

Thanks Everyone

:cool:=D>

[Scrrem]

Broke even on my cost for the 90s today:mrgreen:

Thanks Everyone

Lee,
Thanks for taking on this task and going the extra mile to make sure these are a quality product. =D> Can't wait to get mine!!!
Rich

[QB93Z]

Lee, Congratulations on becoming an auto parts tycoon! Have you place an order for a new ZR1 yet?

Did you or can you produce some emblems that don't have the curve? I would like to display one on my memorabilia wall.

Jim

[Dynomite]

When do you have the 91s ready :happy1:

[limey]

Lee,

do you think your suppliers would be able to remake some "ZR-1" & "CORVETTE" nameplates for the rear bumpers?

[flyin ryan]

Lee,

do you think your suppliers would be able to remake some "ZR-1" & "CORVETTE" nameplates for the rear bumpers?Ya' Lee...jump in with BOTH feet, LOL :mrgreen:.

[902066]

Lee,

Got the emblems for my 90 in the mail today. They look great.

Thanks for all your effort, and for getting us a part that I can afford, without having to pull the twins out of college.

[LGAFF]

I do not think they can do the ZR-1 on the back on the smae scale, they might be too big, these emblems are made of brass....so heavier than stockers....I was thinking of ZR-1 Key chains that look like the "ZR-1" on the back of the car.

[Emilee]

Good work Lee, and the price is right. Very pleased with the emblems. Thanks

[LGAFF]

Sent in 2nd revisions of the 91-95 emblems...will keep focused on these, once I am happy wit the quality I will start the 90s

Probably 10-12 days to see them

[a1991zr1]

iwill take two pair:salute:

[cvette98pacecar]

Lee, When you get the 90, 91-95 let me know I will take a few sets of both.

[LGAFF]

The revised 91-95 has been sent to me, should be here by weeks end