PDA

View Full Version : Clutch switch?

LGAFF
03-25-2009, 06:34 PM
Is this the switch you need to jump?
http://i134.photobucket.com/albums/q115/lgaff/IMG00002.jpg
bobbyhi
03-25-2009, 06:36 PM
Didn't show the pic on my computer:dontknow:
LGAFF
03-25-2009, 06:36 PM
I know this is for stereo equipment, but what the hell is this?

http://i134.photobucket.com/albums/q115/lgaff/IMG000031.jpg
Aurora40
03-25-2009, 06:42 PM
The links appear to be from your yahoo email. They will not show up for the rest of us.
LGAFF
03-25-2009, 06:51 PM
I knew that :rolleyes:
-=Jeff=-
03-25-2009, 07:35 PM
first picture..

NO, that is the Cruise Switch. the Clutch safety switch is 2 heavier gauge wires

off the switch they are both black, on the harness side.. one is yellow and one is purple I think

Second Picture, that is a Passive Crossover, apparently your front speakers are components, so that box splits the highs and lows for the tweeter and midrange speakers
WB9MCW
03-25-2009, 09:53 PM
That splits your "he" tweeter from your "are" components!
-=Jeff=-
03-25-2009, 10:02 PM
That splits your "he" tweeter from your "are" components!


Thanks..I fixed my typos.. damn having a cold and being tired at the keyboard don't mix
WB9MCW
03-25-2009, 10:12 PM
Hey just having fun being a smartazz Jeff!

Good luck with the cold!
Kevin
03-25-2009, 10:15 PM
Pull drivers side hush panel. Find Purple wire that goes to clutch 
switch. Look at switch and note the color of wire coming back 
up.(Yellow??) Will be able to jumper them right there. I used a 3 in 
wire with terminals on the end and unplugged the wires going to switch 
and plugged in the jumper wire. Use a 12 ga wire at least as it does 
carry a heavy current load which is why the switch fails, it gets hot 
and the resistance across the points stops current flow.
-=Jeff=-
03-25-2009, 10:22 PM
Hey just having fun being a smartazz Jeff!

Good luck with the cold!


I know :cheers: No worries, but when Lee reads my original he will be like.. WTF