Valve Cover Emblem ?'s

[32valvZ]

1. Who has them?
2. How much do they run?
3. How do you remove them?
Thanks, John

[GOLDCYLON]

NLA but repros are available out there. I have a set of repros available if you need a pair. Jeffvette sells them and he PCs them and paints them by hand. I believe I bought this set from him or Carter200 that bought them from Dandy I honestly cant remember which and I have one pair available unused. The MY 90s are different from the MY 91-95. The pair I have are for the 91-95s. The colors are different not the shape or size. You wont find them in a Madvet or Ecklers catalog.

For originals ive seen them go on EBAY for over $125 easy thats EACH mind you and usually thats for a high quality used one. For a NOS mint unused one the skys the limit. The last mint pair of NOS emblems I saw on Ebay fetched almost $400 which is crazy I guess unless your a NCRS fanatic. The repros are in the about $125 a pair region.

Take a very small thin flat blade like a jewelers screwdriver to slowly pry up the edges. They will bend as you pry them up slowly as they are only potmetal. Work the sides and tops and bottom and go slow. Dont be surprised when they let go. The new emblem can be held in the camcover recesses by either using double sided adhesive or high temp RTV which is what I used on my car after getting the top end PCed.

PM if you want this pair I can pull them out of my garage stash and take a pic for you. Dont ask me why I bought two pairs, I just did lol GC

[GOLDCYLON]

NLA but repros are available out there. I have a set of repros available if you need a pair. Jeffvette sells them and he PCs them and paints them by hand. I believe I bought this set from him or Carter200 that bought them from Dandy I honestly cant remember which and I have one pair available unused. The MY 90s are different from the MY 91-95. The pair I have are for the 91-95s. The colors are different not the shape or size. You wont find them in a Mavet or Ecklers catalog.

For originals ive seen them go on EBAY for over $125 easy that EACH mind you and usually thats for a high quality used one. For a NOS mint unused one the skys the limit. The last mint pair of NOS emblems I saw on Ebay fetched almost $400 which is crazy I guess unless your a NCRS fanatic. The repros are about in the about $125 a pair region.

Take a very small thin flat blade like a jewelers screwdriver to slowly pry up the edges. They will bend as you pry them up slowly as they are only potmetal. Work the sides and tops and bottom and go slow. Dont be surprised when they let go. The new emblem can be held in the camcover recesses by either using double sided adhesive or high temp RTV which is what I used on my car after getting the top end PCed.

PM if you want this pair I can pull them out of my garage stash and take a pic for you. Dont ask me why I bought two pairs, I just did lol GC

Another option is to leave them off and do what my friend Phil did to his 91 when he had the top end done. I think this looks pretty good as well. Just putting another idea out there for you. Daryll

http://members.cox.net/goldcylon/PHILSBAY.JPG

[32valvZ]

Thanks Daryl. I gatta admit, I didnt expect them to be cheap, but dang!! I'll have my 92 at VOTR this year, and my engine looks pretty good, but the emblems have had it! PM me with a price when you get a chance.
Thank you, John

[Ccmano]

Last I looked Haibeck had them on his site at about $50 apiece for repro's. Still alot if you ask me.

H
:cheers:

[RICKYRJ1]

Haibeck I beleive is $75.00 for repro's

[ZZZZZR1]

Haibeck I beleive is $75.00 for repro's

yup!

http://www.zr1specialist.com/HAT%20Web/products/emblems.htm


Look OEM though!

[PhillipsLT5]

A pinstripper painted mine
I did get a set from Jeff, not on yet
There was a guy in Wisconsin years ago that made them

[GOLDCYLON]

Thanks Daryl. I gatta admit, I didnt expect them to be cheap, but dang!! I'll have my 92 at VOTR this year, and my engine looks pretty good, but the emblems have had it! PM me with a price when you get a chance.
Thank you, John


Hi John heres a Pic they are adhesive backed like the one Haibeck sells as well. Price Pmed

http://members.cox.net/goldcylon/camemb.jpg

[GOLDCYLON]

A pinstripper painted mine
I did get a set from Jeff, not on yet
There was a guy in Wisconsin years ago that made them


Yep that was Dandy but he doesnt make them anymore. Nice guy although. I beleive he sold everything to Jeff

[GOLDCYLON]

SOLD to 32valvZ !

[Z51JEFF]

Im looking for a used OEM set if somebody has some,the finish doesnt matter just cant be bent.

[Z51JEFF]

1. Who has them?
2. How much do they run?
3. How do you remove them?
Thanks, John

John,I sent you an email.

[GOLDCYLON]

Im looking for a used OEM set if somebody has some,the finish doesnt matter just cant be bent.

PM jeffvette Jeff im sure he has some quality used originals

[Dandy97]

As pointed out already Marc has them on his site. He has both repos and refinished originals. I am making the repos and refinishing the originals for him.