Paul Workman
03-07-2009, 09:59 AM
This from Bill B at ZFdoc.com
Hi,
The 3m Window weld (P/N 08609) is recommended for this use regardless if
beam plates are installed. The adhesive/sealant helps to keep the beam
joints sealed so as not to work any grit into the seam joints from road use.
See Ya,
Bill
Hi,
The 3m Window weld (P/N 08609) is recommended for this use regardless if
beam plates are installed. The adhesive/sealant helps to keep the beam
joints sealed so as not to work any grit into the seam joints from road use.
See Ya,
Bill