91 415 & 93 385 Z's

[FU]

http://www.geocities.com/frankurbinati/91ZR1/WVETTE1.gif
http://64.34.180.146/pics0/i/20051031/f/0/3/f03cfe5b39430153c28b5458cef0fa9e0
91 415

http://www.geocities.com/frankurbinati/05large.jpg

93 LPE/LSV 385 engine

http://www.96lt4.com/ZR1/urb93.jpg

93 LPE/LSV

[Nick]

Awesome; I love a white Z. :thumbsup:

[RiceEatingZR1]

Nice looking cars how do you keep your engine clean with all those autographs?

[We Gone]

Very nice ..Not a lot of whites around =D>

[Jim Jones]

White and green ZR-1's!! Very nice. How do you decide which one to drive?

What all goes into the LPE package? Who's autograph is that on the air intake?


Jim

[FU]

White and green ZR-1's!! Very nice. How do you decide which one to drive?

What all goes into the LPE package? Who's autograph is that on the air intake?


Jim

Thanks !
Jerry Watts signature is on the air horn, Gordon K. , Dave Mc. ,John L. are on the plenum.
The 385 LPE package has a custom crank , liner's & bores, porting , cams , headers, exhaust and rear end ratio. The list is rather extensive.

[A1990]

Found this pic. previous owner...

http://www.zr1netregistry.com/larry2.jpeg

[FU]

Found this pic. previous owner...

http://www.zr1netregistry.com/larry2.jpeg


Hey Dennis :wave: :wave:

That is a actually a picture of John Lingenfelter test driving the green LPE/LSV at Indianapolis.

http://www.zr1netregistry.com/larry2.jpeg

[yellowz]

hey frank
what are these beautys doing out when you still have snow in babylon
shame shame shame (LOL)




peter

[Z Factor]

http://www.geocities.com/frankurbinati/91ZR1/WVETTE1.gif
91 415



Is your high rise hood made of carbon fiber? If so, what is it's weight?

:cheers:

[WB9MCW]

Very SWEEEEEEEEEEEEET Z's there Mr. FU2 :thumbsup: :thumbsup: :thumbsup:

[FU]

Is your high rise hood made of carbon fiber? If so, what is it's weight?

:cheers:

For safety reasons the hood is made out of fiberglass. CF could be real tough on the neck.....The Toledo Pro high rise hood is a bit lighter than the stock. Exactly how much less the hood weighs is not known.

[A1990]

Hey Dennis :wave: :wave:

That is a actually a picture of John Lingenfelter test driving the green LPE/LSV at Indianapolis.

http://www.zr1netregistry.com/larry2.jpeg

:thumbsup:Frank!

That picture is historic then!! :notworthy

[WB9MCW]

FU2 was it at the gathering in 96 that JL and DM signed the plentium? Why is not ur plentium the LDE style/type? I would have to agree with a1990 that the pic is historic of ur green 93 LPE/LSV with JL doin da burnout 4 sure!!! :cheers:

[FU]

You could possibly be correct about the signature date being at the gathering in 96 Bryan. The dates that are on the plenum signatures will back that statement up.
Larry Merrow didn't have any of his LPE engines identified by having the LPE engraving done. Guess that it was his own preference to not have the plenums etched. But all of his cars do have a full set of signatures on them. His first car (a 91 368) I believe......has Zoras signature on the plenum. The signature is right down the middle of the plenum . Now that is the plenum to have.

[cuisinartvette]

Lookin good, FU! That white Z is a rare bird for sure!

[95ZR1#418]

Hey Dennis :wave: :wave:

That is a actually a picture of John Lingenfelter test driving the green LPE/LSV at Indianapolis.

http://www.zr1netregistry.com/larry2.jpeg

Nice to have a pic like that.
:mrgreen:

[HIZNHRZ]

So just what does a completely assembled 440 cubic inch engine look like?

[WB9MCW]

Maybe you ment the LPE 415 stroker???

If so well here ya go!!!

http://i119.photobucket.com/albums/o128/wb9mcw/4P1010769.jpg

http://i119.photobucket.com/albums/o128/wb9mcw/BHLPEZR-1ENGINE.jpg

And this one is a 427 CID---

http://www.acsvette.com/car7.jpg