David Vizard Cam Selection Article

[XfireZ51]

I've started a new thread to provide David Vizard article link on Hot Rod magazine. Excellent article which I am sure many of you may have read. If you haven't its well worth the read.

http://www.popularhotrodding.com/tech/0607phr_camshaft_basics/index.html

:-D

[FU]

Excellent link Dom :cheers::cheers:

[XfireZ51]

FU,

Its principally about an SBC BUT it has a great deal of valuable information about developing the right specs for optimizing the cam/cylinder head combination. Know anyone who has the flow numbers for the LT-5 heads?
I'll post a sample of the cam specification when I ran the TFS23d head airflow numbers through a the Vizard calculations. My suspicion is that with a good exhaust system, there's good reason to run a single pattern cam profile on the LT-5 or possibly a smaller exhaust lobe. ;)

[Pete]

FU,

Its principally about an SBC BUT it has a great deal of valuable information about developing the right specs for optimizing the cam/cylinder head combination. Know anyone who has the flow numbers for the LT-5 heads?
I'll post a sample of the cam specification when I ran the TFS23d head airflow numbers through a the Vizard calculations. My suspicion is that with a good exhaust system, there's good reason to run a single pattern cam profile on the LT-5 or possibly a smaller exhaust lobe. ;)


Dom, since your suspended from the garage i can't give you the flow #'s till next year.LOL

Pete

[XfireZ51]

Dom, since your suspended from the garage i can't give you the flow #'s till next year.LOL

Pete

No flow numbers, NO cam spec! YOU COULD be in the 10's, but never mind. :wave::sign10:

[Pete]

No flow numbers, NO cam spec! YOU COULD be in the 10's, but never mind. :wave::sign10:


Ok,maybe we can have your parol hearings early.:-D


Pete

[XfireZ51]

Ok,maybe we can have your parol hearings early.:-D


Pete




HAHAHAHAHAHAHA! See you Friday.

[DaveK]

Just for info - the CamQuest software it mentions in the article is now available as a free download.

http://www.compcams.com/camquest/default.asp