Nothern Exposure '92 #31

[rebelz]

My Alaskan ZR-1. One of damn few up here. I've only seen three including mine, but hear there are a couple more.
http://i263.photobucket.com/albums/ii154/rebelzr1/HatcherPass_04.jpg

http://i263.photobucket.com/albums/ii154/rebelzr1/WithNewShoes_06.jpg

Some motor work has been done. Plenum, Injector housing ported & 63mm Throttle body. Corsa Cat Backs and some exterior bling. Headders are next. Someday ported heads.
http://i263.photobucket.com/albums/ii154/rebelzr1/ZR-1EngineDriversSide.jpg

[ZZZZZR1]

very nice!!!!


Love the Yellow LT5 on the coolant tubes!

Did Carter make them???

:cheers:

[rebelz]

Thanks, I'm having the time of my life with this car. No, because of the condition of the pipes when I bought the car, one had the area around the bolts milled flat to fit standard bolts I needed a new one.
http://i263.photobucket.com/albums/ii154/rebelzr1/92031PassengerSideOriginalPipe.jpg

I bought two because the finish on my other one wasn't so hot. I got the pipes from John Sullivan from the Members Specials Page. I supplied him the color code and for the additional price of the paint(he sent me the left over) he painted them to my spec. I got the Throttle Body Plate from Carter and used some of the paint I had to do the Bowtie in Yellow also. I'm very pleased with both products and they added just what I thought they would.
REBel

[carter200]

Thanks, I'm having the time of my life with this car. I got the Throttle Body Plate from Carter and used some of the paint I had to do the Bowtie in Yellow also. I'm very pleased with both products and they added just what I thought they would.
REBel

ZZZZZR1 and rebelz thanks for mentioning my Billet Throttle Body Plate and coolant pipe engraving. Rebelz the yellow really did work for you on both the coolant pipes and throttle body plate.
Ron Ashcraft has a 94ABZ and is in your area. He's a great guy and has vast collection of CT Machining items. Thanks again both of you :cheers:

[rebelz]

No problem Carter, like I said I'm very pleased with the results. Ron and I are friends. He has a highly modified 94 Admiral Blue Z that he races. It's torn down right now, he is putting Stainless Works headders on it. Very nice looking and fitment on those as well.
rebelz

[4DSZR1]

Great looking car!! I really like the first picture

[tomcat]

Great looking car!! I really like the first picture :thumbsup:

Nice ZR1. Hope you can make it to this "Great Zr1 Event" in August 2009.
http://www.zr1netregistry.com/forum/showthread.php?t=7505

Manfred E........
91 #906 :hello:
http://pnwzr1.net

[rebelz]

Nice ZR1. Hope you can make it to this "Great Zr1 Event" in August 2009.
http://www.zr1netregistry.com/forum/showthread.php?t=7505

Manfred E........
91 #906 :hello:
http://pnwzr1.net

Thank's everyone for your kind words. Tomcat, I just might do that. I've been wanting to redrive parts of 'Route 66'. My uncle and I did it in the late sixties in his '62 Vert. I can take the Alaska State Ferry System from Whitier, AK to Bellingham, WA thus avoiding miles and miles of nothing but miles and miles... of bad road. Combining the events. Hummm! Sounds good to me.
REBelZ

[Jeffvette]

My Alaskan ZR-1. One of damn few up here. I've only seen three including mine, but hear there are a couple more.


I think there were about 6 when I left Anchorage in 95. My first taste of being in a ZR-1 was from the one Bill Allen owned. A black 90. I would love to find that car.

I still miss Anchorage.

[tomtom72]

Great looking car!! I really like the first picture

I agree, schweeet lookin' Z! Those touches with the yellow really grab your attention. Nice!

[WB9MCW]

http://i126.photobucket.com/albums/p110/HAMMERHATE/WithNewShoes_06.jpg

Gotta luv how your plate is yeller too!