ID for couple items>>>

[ZR1Vette]

In the amidst of my winter projects and while having the left wheel well rear housing removed these two items are attached to the inside of the housing.. one is a plug with a cover and the other looks to be a module of some sort.. any one ID what they are?
http://i17.photobucket.com/albums/b79/MRBLU/ZR1plugandmoduleleftwheelwell.jpg

[rebelz]

I believe the one toward the front (left in the picture) is the Vacuum pump fuse and holder. I haven't figured out the other one. Anyone? Anyone? Bueller? ;)

[tomtom72]

I'm not 100% sure on the larger rectangle like box, but I do think that on our 90 Z's it's one of the "Quad Driver" boxes for the fuel injectors.

There are two of those, one for the 1* and one for the 2* injectors. Oh, I do believe that they are NLA, so be nice to them!:mrgreen:

:cheers:

[ZR1Vette]

Tom...bingo...once you suggested the ID I went to the shop manaul and right on (item in pic is what is #1 in this graphic)>>
http://i17.photobucket.com/albums/b79/MRBLU/ZR1SecondaryRelaygraphic.jpg

[RICKYRJ1]

I'm not 100% sure on the larger rectangle like box, but I do think that on our 90 Z's it's one of the "Quad Driver" boxes for the fuel injectors.

There are two of those, one for the 1* and one for the 2* injectors. Oh, I do believe that they are NLA, so be nice to them!:mrgreen:

:cheers:

OK Sherlock! Where's Jimmy Hoffa??? :mrgreen::worship::worship:

[ZR1Vette]

Also for the quick of eye... the VIN is stamped on the frame rail in the right of the picture...another way to verify car authenticity.

[ZR1Vette]

And rebelz gets the kudos for the ID of the In-Line Vacuum Pump Fuse 10 amp...finally found it in the Electrical Diagnosis Service Manual Supplement>

http://i17.photobucket.com/albums/b79/MRBLU/ZR1WiringHarnessdiaghram.jpg

[Aurora40]

There are two of those, one for the 1* and one for the 2* injectors. Oh, I do believe that they are NLA, so be nice to them!:mrgreen:

:cheers:
Just FYI, I believe they are actually both for the secondary injectors. Each one controls four injectors.

[tomtom72]

Just FYI, I believe they are actually both for the secondary injectors. Each one controls four injectors.

Yes, my bad....it's been so long since I looked in that section of the FSM. I remember doing all that looking in prep for me doing my 1st plenum pull. I was looking at everything associated with the FI system. :rolleyes: noooobies!
I was sooo apprehensive when my 1*'s quit!:sign10:

Ya I know so what was I doing down there...finding a suitable place for my hood light shut off switch.:redface:

:cheers:

[tomtom72]

OK Sherlock! Where's Jimmy Hoffa??? :mrgreen::worship::worship:

Oh, didn't the real estate agent tell ya?? Under your garage floor...waaaay under the floor.:sign10:

[RICKYRJ1]

Oh, didn't the real estate agent tell ya?? Under your garage floor...waaaay under the floor.:sign10:

Great! I'm calling Geraldo Rivera now and see how much he will pay me for the rights to dig him up. :mrgreen: