Need upper control arm.

[rhipsher]

Need help from the brotherhood locating the passenger side upper control arm on a 1990 ZR-1. They've been discontinued from GM. I'll put the word out on the other two sites also. Thanks guy's.

[jonszr1]

i think corey has a couple of parts cars at his house .can you believe people were stuck in la till yesterday aft.hehe

[jonszr1]

is it bent or could you press new bushings in it ?

[Jeffvette]

I doubt you need a new control arm. GM does not sell individual bushings. Their solution is to sell you a new A-arm.

Get a bushing kit for your car. If you've got one like this, I'm sure the others are not exactly in the greatest shape.

[rhipsher]

I doubt you need a new control arm. GM does not sell individual bushings. Their solution is to sell you a new A-arm.

Get a bushing kit for your car. If you've got one like this, I'm sure the others are not exactly in the greatest shape.

Your right I don't need the whole A arm just one bushing. But they don't sell the A arm bushings alone. If I can find one in decent shape, Three wacks on the ball joint seperater and two 18mm bolts, put the new one on and I'm done. And I can hit the drag strip tommorrow. I plan on rebushing the front end. But wanted to wait till after the hollidays.

[Jagdpanzer]

About the best deal you will find anywhere for NOS control arms:

http://www.corvetterecycling.com/C4_Upper_Right_Control_Arm_p/c4frontupperaarm.htm

Hey rhipsher,
Any progress on the CNC top end porting project?

[rhipsher]

About the best deal you will find anywhere for NOS control arms:

http://www.corvetterecycling.com/C4_Upper_Right_Control_Arm_p/c4frontupperaarm.htm

Hey rhipsher,
Any progress on the CNC top end porting project?

Thats a great price for an nos brand new/rebuilt arm. No progress yet on the porting. I'm still waiting for a few more bits of info before I machine them.