Dipstick Tube Seal

[Hammer]

Anybody got a couple of dipstick tube seals they want to part with?
Shoot me a price shipped to zip code 83686 if so.
Thanks.
John

[-=Jeff=-]

Anybody got a couple of dipstick tube seals they want to part with?
Shoot me a price shipped to zip code 83686 if so.
Thanks.
John

What is special about this seal?

I assume when you do headers it HAS to be replaced or can it be reused?

[4DSZR1]

What is special about this seal?

I assume when you do headers it HAS to be replaced or can it be reused?

I have the same question.... Aren't they juts an O-ring?

[A26B]

I have the same question.... Aren't they juts an O-ring?

Nope... Can be reused, but they're getting old, splitting, tearing up when re-inserted, etc.

John, sorry I have no news to report yet on getting them made. Been tied up on other matters.

http://i190.photobucket.com/albums/z224/A26B/DipstickSeal.jpg

UPDATE: IN STOCK @ JERRYS GASKETS!

http://http://jerrysgaskets.com/store2/root/index.php?main_page=product_info&cPath=18&products_id=40

[GOLDCYLON]

Crap Jerry not good news I thought you would be all over this ;). Break.. Hammer did not Jim V say he had a bagful of them somewhere in an earlier post? GC

http://www.zr1netregistry.com/forum/showthread.php?t=6655

see post # 17

[zr1don]

I just installed a set of SW headers on my Z, when I removed the dipstick tube I could not find the seal. I used an oil resistant "O" ring & it seams to be working fine (no leaks).

[tomtom72]

I just installed a set of SW headers on my Z, when I removed the dipstick tube I could not find the seal. I used an oil resistant "O" ring & it seams to be working fine (no leaks).

just curious, where did you get it and do you have a P/N???

TIA
:thumbsup:
Tom

[A26B]

The dipstick seals can be accidentally pushed into the crankcase during dipstick install if it comes off the dipstick when it's removed, especially if the mechanic doesn't know it's there. I've had a couple of calls saying "mine didn't have one" or it "disappeared cuz I can't find it." O-rings would be easier to lose that way, but beats the heck out of nothing. If the bottom of the dipstick was "flared" maybe the o-ring would stay on better when removed again.

One note: I don't think the seal ending up in the pan is the end of the world.... probably won't hurt anything since it's below the windage tray & the pickup screen will stop it from getting into the pump.

[zr1don]

tomtom72,

The o-ring I used was from an assortment I bought, they are oil/fuel resistant and I chose one that fit tightly on the dipstick tube & does not slip over the flange that stops the dipstick from being pushed deeper into the oil pan.

[A26B]

Finally finished the drawing for the dipstick seal and have sent it out for quotation. I'm not very optimistic that I can justify the cost of the injection mold for a small run, but always hopeful.
Jerry

[Hammer]

Finally finished the drawing for the dipstick seal and have sent it out for quotation. I'm not very optimistic that I can justify the cost of the injection mold for a small run, but always hopeful.
Jerry

Thanks for the update Jerry. I look forward to hearing about this later.

[HIZNHRZ]

Finally finished the drawing for the dipstick seal and have sent it out for quotation. I'm not very optimistic that I can justify the cost of the injection mold for a small run, but always hopeful.
Jerry

Perhaps this is an item that your brothers have to step up and help you cover.

[GOLDCYLON]

Jerry how many do you need to make and sell to turn a profit? I sure a few of us would buy just for gp. gc

[tomtom72]

Jerry how many do you need to make and sekk to turn a profit? I sure a few of us would buy just for gp. gc

I'll bite also. I know I'll never use more than one in theory when I get around to doing my headers.....but I'd be interested to know what it would take to get this off the drawing board. If I can afford the price I'd be willing to pony up so we all would have an "out" so to speak....:redface:

Please, don't take me the wrong way....I'm not puttin' on airs. It's just the way I look at it is if we don't help ourselves, no one from the outside is gonna help us...JMHO:redface:

:cheers:
Tom

[A26B]

Jerry how many do you need to make and sell to turn a profit? I sure a few of us would buy just for gp. gc

Daryl,
I won't know until the quotes come in. I sent requests to about 8 companies.

The LT5 is such a limited market that quantities are low. The more expensive tooling charges seem to be for items with the least parts sold, like the pan gasket. Annual requirements for pan gaskets, front cover gaskets and oil pump seals is almost nil. May take years to recover the development cost investment.

Neat thing is, I enjoy doing this. Nice corresponding with ZR-1 owners I've never heard of before, shipping overseas & answering questions. All the compliments on quality & service are most rewarding. Still, would be nice to get into the black one of these days:pray

[jonszr1]

jerry , i for one am very thankfull for what you do. i know one thing when i need parts i will always ck to see if you stock them before i go any where else . i would be willing to donate 50 bucks to help in the developement of things like this . its a small price to pay to help see that we have parts to keep our cars alive :cheers:

[ScottZ95ZR1]

There are some of these available on the bay:
http://cgi.ebay.com/ebaymotors/Corvette-ZR-1-LT5-Seal-Oil-Dipstick-Tube10106190_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205 Q7c39Q3a1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksid Zp3286Q2ec0Q2em14QQhashZitem110305765376QQitemZ110 305765376

[Gunny]

When I put my SW headers on about a year ago, I replaced the dipstick grommet with a new one. Got it through my local dealer (who is notorious for heavy markups, i.e. Corvette tax) who charged me $4.15. Wish I had bought a few more at that price :mad:

George

[A26B]

I don't have all of the quotes in yet and only have 1 still out with any hope of a justifiable deal. I should know more next week, but I'm not optimistic.

[Jeffvette]

I don't have all of the quotes in yet and only have 1 still out with any hope of a justifiable deal. I should know more next week, but I'm not optimistic.


Jerry, what has been the estimates so far?

[flyin ryan]

i'm pretty sure nobody "really" wants to do it...it's all about the volume these days:rolleyes:. that said the economy is still in the dirt chute, doing it the "volume" way.

[Hammer]

There are some of these available on the bay:
http://cgi.ebay.com/ebaymotors/Corvette-ZR-1-LT5-Seal-Oil-Dipstick-Tube10106190_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205 Q7c39Q3a1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksid Zp3286Q2ec0Q2em14QQhashZitem110305765376QQitemZ110 305765376

$36 a pop. Phuck that. Jerry, if we are looking at those kinds of prices, I sure hope your numbers come out good.

The problem with the ebay item is it's a done deal when they are all gone...and we are right back here again.

[A26B]

$36 a pop. Phuck that. Jerry, if we are looking at those kinds of prices, I sure hope your numbers come out good.

The problem with the ebay item is it's a done deal when they are all gone...and we are right back here again.

The final quote I was waiting on came in. Relative to the other quotes, it great, otherwise, it sucks. This is a $5.00 part but being small actually makes it more expensive to produce. At the same time, I had a similar part quoted for the 405 Hp engines that is about 5 times bigger & it's less expensive to produce.

Here's what it is: All domestic shipping is $5.00/shipment, 1 or 100 seals

If I can pre-sell 145, the price is $17.50ea + shipping

If I can pre-sell 70, the price is $22.50ea + shipping

All depends on quantity. BTW, there is no "in-between" pricing , have to reach 145 to get the lower price.

Delivery time from order is appx 18 working days or almost a month.

John, you make a good point about the eBay sale, all being gone and right back to present square one.

I'm sure you guys will let me know what you think. Just don't shoot me though, I'm just the messenger.

[Hammer]

Nice Job.
Put me down for 4

[Jeffvette]

Nice Job.
Put me down for 4


How many ZR-1's you got now John?

[Hammer]

How many ZR-1's you got now John?

Donating for the cause. I'll probably have the extra two for life, or maybe they will be my retirement plan. LOL

[vettn71]

Jerry

I'll do at least two, just to help justify doing the deal. Having a spare would be good, not to mention someone may need one down the road. :thumbsup:

Jim

[tomtom72]

Thanks Jerry for all the trouble you go thru for our cars!:thumbsup:

I'd like to be put down for two please, thanks.

:cheers:
Tom

[GrayZ]

i'll take one Jerry, can't be too carefull when dealing with
one's dipstick. :wave:

[flyin ryan]

i'll take five (5) Jerry, if you can make the deal fly. either way thanks for your effort;)

[HIZNHRZ]

Great job. Put me down for 2.

[AtsZR1]

Jerry, please put me down for 4. Thanks for making this happen for all of us. Henry Atsma

[ScottZ95ZR1]

Jerry - Please put me down for 2 as well. Thanks.

[GOLDCYLON]

Jerry im in for 1. I have also stuck this thread to the top.

[Hammer]

Jerry im in for 2. I have also stuck this thread to the top.

GC, thanks for sticking this thread. Hopefully we can get enough to get this done. I posted on the CF and will put one on the Dc and CAC also.

[GOLDCYLON]

GC, thanks for sticking this thread. Hopefully we can get enough to get this done. I posted on the CF and will put one on the Dc and CAC also.


No sweat John im happy Jerry is moving the project along. A couple for every ZR-1 owner to have on hand is never a bad idea. Especailly if they plan on installing headers at some point.

[jonszr1]

jerry put me down for 2 also .thanx so much for doing this

[Hammer]

No sweat John im happy Jerry is moving the project along. A couple for every ZR-1 owner to have on hand is never a bad idea. Especailly if they plan on installing headers at some point.

That's what I figure, at least one to replace the one in the car now and an extra or two for later would be the minimum.

[A26B]

Dipstick Tube Seal running total for initial order : 25 :thumbsup:

[Hammer]

That's it so far? We'll get there, I think. You guys working on your cars, you need a couple laying around. Our cars are old and these things are brittle. They break easily too.

[z proud]

Jerry, Put me down for 2... :thumbsup:

[xlr8nflorida]

Ok so I know I'm an idiot.

Is this what is at the top of the dipstick?

Is it a part that typically goes bad? You guys checking the oil 50 times a day?:icon_scra

[A26B]

Ok so I know I'm an idiot.

Is this what is at the top of the dipstick?

Is it a part that typically goes bad? You guys checking the oil 50 times a day?:icon_scra

This is the seal on the bottom of the dipstick where it plugs into the block.
http://i190.photobucket.com/albums/z224/A26B/DipstickSeal.jpg

[billybaloneey]

I'll take two (2), let me know when, where, and how to complete the transaction.

Thanks

[diamond zr1]

put me down for 2/hope we get there/

[A26B]

Dipstick Tube Seal running total for initial order : 31

[Jerry#397]

Jerry,

Put me down for one (1).

Thanks,
Jerry

[Polo-1]

I'll take 5

[Emilee]

Put me down for five

[A26B]

Total is now at 42

[flyin ryan]

Total is now at 42well...we've at least cleared ½ way to 70:happy1:

[Hammer]

well...we've at least cleared 70:happy1:

Where the hell did you learn to count, Canada or someplace. :dontknow:

We are getting there though.

Where the hell is everyone? This should have been done already. Or is everyone but us hoarding these for their retirement... :mrgreen:

[flyin ryan]

Where the hell did you learn to count, Canada or someplace. :dontknow:

We are getting there though.
that's what i meant originally, ½ way, o.k. boy you pick up my mistakes fast:redface:

[Hammer]

that's what i meant originally, ½ way, o.k. boy you pick up my mistakes fast:redface:

That's BS, you corrected your original so now everyone will think I can't read. :-x

[DaveK]

I'll happily take a couple to help the cause.

[flyin ryan]

That's BS, you corrected your original so now everyone will think I can't read. :-xcan you? :sign10::p

[Hammer]

Thanks to everyone that has stepped up so far. 24 to go...I think that's the number now with Dave's.

Can't count either, 26 to go.

[l1sikes]

I'll take 4.

S. L. Sikes
Burton, Texas

[Hammer]

I'll take 4.

S. L. Sikes
Burton, Texas

Come on all you big bad ZR-1 owners. Step up, commit, buy a couple and let's get this thing done. We aren't that far away and Jerry's doing us all a huge favor.

[QB93Z]

Jerry,

I would like to get two of the seals.

Jim Voter

[A26B]

As of now, the total stands @ 50

[-=Jeff=-]

As of now, the total stands @ 50
How many you need?

I could do 2

[Hammer]

How many you need?

I could do 2

We need 70 for Jerry to do the initial order. We are at 52 with your's. Thanks man, only 18 left. :dancing

[xlr8nflorida]

We need 70 for Jerry to do the initial order. We are at 52 with your's. Thanks man, only 18 left. :dancing

I'll take 2 :cheers:

[A26B]

Count presently stands at 54......

[karterdon]

I will do my part - Count me in for two(2) :thumbsup:

Don Yoakem
91 #267 Dark Red Met
karterdon@aol.com

[jrd1990zr1]

Thanks for your efforts Jerry!!

I'll go for two. :cheers:

[Bob Seliga]

I started her up this evening and saw a little smoke comming fron the passenger side and decided to check to see if anyone else had noticed this problem. Its interesting that this seems to be common.

I'll commit to 2. Thanks.

[A26B]

Count presently stands @ 60. 10 to go.

[GOLDCYLON]

Come on folks help Jerry out. Which helps US out. Only ten to go ! ! !

[A26B]

I'll drop the minimum to 65...... That leaves only 5 to go.

[zrss]

I'll take 2.

[Hammer]

I'll drop the minimum to 65...... That leaves only 5 to go.

Well folks, I hate like hell to do this, but it is necessary. The economy got to us. I am forced to sit on my car and have had only one offer and two inquiries. The offer I had was a lowball, which I accepted and then the guy bailed on me. One of the other interested parties wants a car with original paint, which mine has, but it has a couple imperfections so he doesn't want it now. Hmmm, must also want perfect original paint too. So guess I'm keeping it for awhile. If a person was to actually see the car I am sure they will buy it...anyway.

I have to reduce the number of seals I'm in for to one. I was in for 4. I'd bail on all of them except I started this so I feel I have to at least stay in it. That still leaves only 6 to go.

Sorry 'bout this guys.

[tomtom72]

Thanks Jerry for all the trouble you go thru for our cars!:thumbsup:

I'd like to be put down for two please, thanks.

:cheers:
Tom

Okay, since I'm ham fisted....I'll take two more. My order total is now four(4). This has got to be getting close to where it is worth it for Jerry to do this, I hope.:pray

Thanks again Jerry for trying to help us out!:thumbsup:

Oh, I forgot, Jerry may I add a set of exhaust gaskets to this order?

:cheers:
Tom

[Hammer]

Four more and this is a done deal. Thanks everybody.

[billybaloneey]

PM me when you get the needed number.

[A26B]

Okay, since I'm ham fisted....I'll take two more. My order total is now four(4). This has got to be getting close to where it is worth it for Jerry to do this, I hope.:pray

Thanks again Jerry for trying to help us out!:thumbsup:

Oh, I forgot, Jerry may I add a set of exhaust gaskets to this order?

:cheers:
Tom

Tom,
Of course!! :handshak:

[cvette]

Jerry, You've got mail!

Charlie

[tomtom72]

Tom,
Of course!! :handshak:

Thank you so much Jerry. I figure I need gaskets for my header install and I'd like to keep the $ in "the family"....so to speak.:o

:cheers:
Tom

[Paul Workman]

Put me in for one!

P.

[HIZNHRZ]

Jerry,

Did you get enough interest to go forward with the dipstick tube seal?

Do you need people to start putting in orders?

[-=Jeff=-]

Jerry,

Did you get enough interest to go forward with the dipstick tube seal?

Do you need people to start putting in orders?
:iamwithst

What is the status of this?

[A26B]

Jeff,
We came up a little short & I have been sidetracked on other projects. I'll check with the vendor & see if they are willing to run a trial sample. If so, will publish the group list & update.

[-=Jeff=-]

Jeff,
We came up a little short & I have been sidetracked on other projects. I'll check with the vendor & see if they are willing to run a trial sample. If so, will publish the group list & update.

How many short?

[VetteMed]

How many short?

Yeah, I'll go in on this if it helps make it happen.

[A26B]

Before I reopen this, I want to see if I can get a trial piece to approve and verify the cost again.

[HAWAIIZR-1]

Jerry,

I'll take one to help the cause. I just bought one of the $30 ones so I might not outlive more than one.

[A26B]

I have ordered a prototype to confirm proper fitment (and that I made the drawing correctly:pray)

[vandornjim]

Hey gang! Found another whole box full of LT5 stuff. Everythiong from cam chains to tensioner plates. A real jackpot!

What is the status of the repro dipstick seals? I see the one I put on ebay is $13. Have a few of them.

[A26B]

.........
What is the status of the repro dipstick seals? I see the one I put on ebay is $13. Have a few of them.

Jim,
Status is: we are trying to gather support to justify the manufacture of sufficicient numbers insure future needs at a reasonable price. Read the last few posts, beginning with #86 for current status.

Jerry

[A26B]

Trial piece being shipped today. Will update with results.

[Hammer]

Trial piece being shipped today. Will update with results.

Right on. Wife's working again so I'll take two now.
Thanks Jerry.

[A26B]

:cheers:
The prototype Dipstick Tube Seal arrived a few minutes ago and it's a go! Very nice workmanship & very good fit. I tried it on one of the spare engines and it fits very nicely, especially compared to the original seal which was on the loose side and probably a "seeper/leaker." Very happy with the supplier & product.

OK... here's the plan. The following is a list of supporting pre-orders that made this possible. In order to keep the process simple, please email me jerry@jerrysgaskets.com and I will reply with the email address for you to use with PayPal payments and a mailing address for payment by check or money order.
Originally, with a pre-production group purchase of 70 pieces, the price was $22.50 + shipping. PRICE is now $22.00 ea, INCLUDING SHIPPING.

If you are not on the list, please feel free to jump in. Also, to be fair, the pre-order deal window will close 30May09. Afterwards, standard procedure for web orders will apply.

ALSO: PLEASE INCLUDE YOUR NAME & MAILING ADDRESS WHEN YOU EMAIL ME.

AND: YOUR FORUM NAME SO I KNOW WHO'S WHO.

Zr1 Net--------Seals
Registry--------Qty----Paid
Handle

Hammer---------2-----PAID
vettn71---------2-----PAID
tomtom---------4-----PAID
ITLGO2---------1-----PAID
flyin ryan--------5-----PAID
HIZNHRZ--------2
AtsZR1----------4-----PAID
ScottZ95ZR1----2------PAID
GOLDCYLON-----1------PAID
jonszr1----------2
z proud----------2-----PAID
billybaloneey-----2-----PAID
diamond zr1------2-----PAID
Jerry#397-------1-----PAID
Polo-1-----------5-----PAID
Emilee-----------5-----PAID
DaveK-----------2-----PAID
l1sikes-----------4-----PAID
QB93Z----------2-----PAID
-=Jeff=---------2-----PAID
xlr8nflorida-------2
karterdon -------2
jrd1990zr1-------2-----PAID
Bob Seliga-------2
zrss-------------2-----PAID
Paul Workman---1-----PAID
cvette----------4-----PAID
VetteMed-------1-----PAID
HAWAIIZR-1 ----2-----PAID
carter200-------2-----PAID
glass slipper-----2
We Gone--------2-----PAID
jmascharka------1-----PAID
shaynezr1-------2-----PAID
scottF----------2
sgreg-----------1-----PAID
bobbyhi---------1-----PAID
4DSZR1---------1-----PAID
Z51JEFF--------2-----PAID
MikeF7142------1-----PAID
zr1don---------2
rhanselman-----2-----PAID
1991ZR1-------1
tf95ZR1--------1-----PAID

[carter200]

Jerry,
Put me down for 2. Thanks :cheers:

[HAWAIIZR-1]

Jerry,

I'll take one to help the cause. I just bought one of the $30 ones so I might not outlive more than one.

Jerry,

I appears I was missed from the list. You can put me down for an additional one so make it 2 for me.

Mahalo!!

[Hammer]

Email sent. :worship:

[HAWAIIZR-1]

You've got mail!

[carter200]

You've got mail from me, too :dancing

[bobbyhi]

Me too................:dancing

[We Gone]

2 here also..

[GOLDCYLON]

Paypal sent. Thanks Jerry

[VetteMed]

Paypal sent ! Thanks for making this happen, Jerry!

[jmascharka]

paypal sent, I'll take 1.

Thanks Jerry

[Sgreg]

Paypal sent. Thanks, Jerry, for taking the ball and running with it.

Greg

[DaveK]

Hey Jerry. Paypal also sent.

Thanks!

[carter200]

Paypal sent, too :thumbsup:

[jrd1990zr1]

Payment sent via Paypal.

Thanks Jerry for making these available. :worship:

Best Regards, John :cheers:

[A26B]

John Boyd, a/k/a Hammer here-abouts, deserves the real credit for working hard to insure that all the forums were aware of an attempt to secure enough comitments to make it possible.

My thanks to you John, for your unselfish efforts on behalf of us all!:cheers:

[Z51JEFF]

Ill take 2 Jerry,email on the way.Thanks for putting this together as well as your gaskets sets,it looks like the big parts places never will start making parts for these cars so it will be the diehards such as yourself that gets new parts out there.

[Hammer]

John Boyd, a/k/a Hammer here-abouts, deserves the real credit for working hard to insure that all the forums were aware of an attempt to secure enough comitments to make it possible.

My thanks to you John, for your unselfish efforts on behalf of us all!:cheers:

Aw shucks Jerry, you shouldn't.

Well thanks for the kudos Mr. Downey, I appreciate what you have done for us. I did this for the brotherhood and no other reason. I would sure like to have the contacts you have (but not the phone bill), without them these things wouldn't happen. Here's one for ya too bro. :cheers:

Just two jarheads working together for a common cause.

[flyin ryan]

PayPal completed :handshak:

[HAWAIIZR-1]

Jerry,

The guys in Japan want to order 10. He will try to contact you direct and if it is too much trouble for you to ship then we can add it to my order and I can ship to them.

Thanks!

[A26B]

It's not at all too much trouble to ship to them. I just can't ship internationally for the same price. I think the cheapest I can ship is about $13.00. I think we have email going on this...

[tomtom72]

sorry I'm late Jerry, I was out of town for a few days...:o

I'll send paypal asap.

:cheers:

Jerry, 12:06 PM Tuesday 5/19 paypal sent. Thank you for your efforts!!!

[A26B]

You're good to go Tom.....Thanks

[A26B]

:cheers:
The prototype Dipstick Tube Seal arrived a few minutes ago and it's a go! Very nice workmanship & very good fit. I tried it on one of the spare engines and it fits very nicely, especially compared to the original seal which was on the loose side and probably a "seeper/leaker." Very happy with the supplier & product.

OK... here's the plan. The following is a list of supporting pre-orders that made this possible. In order to keep the process simple, please email me jerry@jerrysgaskets.com and I will reply with the email address for you to use with PayPal payments and a mailing address for payment by check or money order.
Originally, with a pre-production group purchase of 70 pieces, the price was $22.50 + shipping. PRICE is now $22.00 ea, INCLUDING SHIPPING.

If you are not on the list, please feel free to jump in. Also, to be fair, the pre-order deal window will close 30May09. Afterwards, standard procedure for web orders will apply.

ALSO: PLEASE INCLUDE YOUR NAME & MAILING ADDRESS WHEN YOU EMAIL ME.

AND: YOUR FORUM NAME SO I KNOW WHO'S WHO.

Zr1 Net--------Seals
Registry--------Qty----Paid
Handle

Hammer---------2-----PAID
vettn71---------2-----PAID
tomtom---------4-----PAID
ITLGO2---------1-----PAID
flyin ryan--------5-----PAID
HIZNHRZ--------2
AtsZR1----------4-----PAID
ScottZ95ZR1----2------PAID
GOLDCYLON-----1------PAID
jonszr1----------2
z proud----------2-----PAID
billybaloneey-----2-----PAID
diamond zr1------2-----PAID
Jerry#397-------1-----PAID
Polo-1-----------5-----PAID
Emilee-----------5-----PAID
DaveK-----------2-----PAID
l1sikes-----------4-----PAID
QB93Z----------2-----PAID
-=Jeff=---------2-----PAID
xlr8nflorida-------2
karterdon -------2
jrd1990zr1-------2-----PAID
Bob Seliga-------2
zrss-------------2-----PAID
Paul Workman---1-----PAID
cvette----------4-----PAID
VetteMed-------1-----PAID
HAWAIIZR-1 ----2-----PAID
carter200-------2-----PAID
glass slipper-----2
We Gone--------2-----PAID
jmascharka------1-----PAID
shaynezr1-------2-----PAID
scottF----------2
sgreg-----------1-----PAID
bobbyhi---------1-----PAID
4DSZR1---------1-----PAID
Z51JEFF--------2-----PAID
MikeF7142------1-----PAID
zr1don---------2
rhanselman-----2-----PAID
1991ZR1-------1
tf95ZR1--------1-----PAID



getting there

[zr1don]

Email sent, 2 fer me.

[A26B]

Notice received that Dipstick Tube Seals are done, should be here by Thursday, 28May09.:occasion1

Deadline for the group purchase deal is Sat, 12:00Midnight, 30May09.

Seals must be paid for by the deadline to be considered part of the group purchase.

I will start shipping prep 31 May & ship 1 Jun

No stragglers please.:pray

Thanks to everyone for making this work.:cheers:

[bdw18_123]

Are you planning to carry these on your website? Will they be available for purchase in the future?

[A26B]

Are you planning to carry these on your website?

Yes. Price will be higher & std shipping will also apply.

Will they be available for purchase in the future?

Yes, on the website.

[A26B]

GROUP PURCHASE OF DIPSTICK TUBE SEALS IS CLOSED

The offering closed oficially at midnight on Sat, 29 June. If you missed it or didn't get payment in before the deadline, dipstick tube seals are available on the website.

When it was all said & done, there were 38 participants who joined the group purchase and bought 81 seals.

Seals are in, packaged & labeled and will be shipped out tomorrow by USPS mail.

Thanks to all participants for making it possible. :thumbsup: It certainly lends encouragement to the next project!

[Hammer]

Jerry, thanks for your work on this. I certainly appreciate it. :cheers:

[QB93Z]

I got my seals today. They look great. Thanks.

Jim

[bobbyhi]

Got mine over the weekend. Thanks Jerry:handshak:

[-=Jeff=-]

got mine today!

[AtsZR1]

Jerry, got my seals...they look great. Thanks for all the effort to make this happen for all of us. Henry

[4DSZR1]

Thanks Jerry, I got mine over the weekend too! :thumbsup:

[tomtom72]

:redface: sorry I forgot to post up. Thanks Jerry as I got mine the other day and they are great! Thanks!:thumbsup:

[GOLDCYLON]

Jerry received mine looks good. Thanks again GC :cheers:

[A26B]

Thanks guys.......

[flyin ryan]

Received mine today, Thanks for everything Jerry :thumbsup:

[mgbrv8]

I found these

http://www.zr1.net/forum/showpost.php?p=120402&postcount=3