Clutch Slave Replaced

[2ZR1S]

I got my clutch slave cylinder replaced today. I ordered from rockauto.com (Dorman Part #CS360017 (http://wiki.rockauto.com/1992%20CHEVROLET%20CORVETTE%20ZR-1%205.7L%20350cid%20V8%20MFI%20%28J%29_Clutch%20Sl ave%20Cylinder_1041321_2044)) $64 shipped. Looks to be a better part than the original. It is cast steel instead of stamped.
Time will tell, thought I would share the part # and observation.

Later
=D>

[tomtom72]

I'm just curious about the cast slave and having enough threads left on the mounting studs....any issues with that aspect.

I'm asking because I bought a cast slave from RockAuto back in 05-06 made by Fedral-Mogul and the flange looked so thick to me that I would have had an issue of not having enough thread left to put the mounting nuts back.

TIA
:thumbsup:
Tom

[2ZR1S]

I'm just curious about the cast slave and having enough threads left on the mounting studs....any issues with that aspect.

I'm asking because I bought a cast slave from RockAuto back in 05-06 made by Fedral-Mogul and the flange looked so thick to me that I would have had an issue of not having enough thread left to put the mounting nuts back.

TIA
:thumbsup:
Tom

It will work, will have around 1 thread out the nut.

[tomtom72]

Thanks Jon!:thumbsup: