Help - SLP intake install

[DaveK]

Hope someone can point me in the right direction here. I'm tring to install the SLP 'CLaw' intake I bought and the instructions have me confused. The instructions say to "remove the A.I.R Pump supply hose from the airbox and save the snap clamp". Only thing is when I removed the airbox there was no other hose attached and even looking in the FSM I can't seem to find out where the A.I.R pump is.

Looking at the intake there's a hole with a grommet on the right hand side and a length of tube, but nothing from the Z seems like it would hook up correctly.

Any help would be appreciated.

Thanks

[Aurora40]

The AIR pump is for LT1 cars. There is no AIR pump hookup. You just need to cap off that ~3/4-1" tube on the driver's side of the Claw.

[Aurora40]

http://members.aol.com/corvettezr11990/misc/claw.jpg

[GOLDCYLON]

The AIR pump is for LT1 cars. There is no AIR pump hookup. You just need to cap off that ~3/4-1" tube on the driver's side of the Claw.


Yep the SLP claw is a one size fits most c4s LOL. So as stated you will need to cap the little bugger off. :mrgreen:

[DaveK]

Thanks guys, I appreciate the info. What's the best way of capping it?

[Aurora40]

I bought a rubber vacuum cap at the local auto parts store. I think 3/4" in size, but don't recall exactly.