Do these spacers make my AZZ look big?

[LGAFF]

Got the 18mm spacers on today, they look great......before and after shots:


Spacers from wheeladapter.com
http://i134.photobucket.com/albums/q115/lgaff/DSC02480.jpg



AZZ clinched:

http://i134.photobucket.com/albums/q115/lgaff/DSC02481.jpg
http://i134.photobucket.com/albums/q115/lgaff/DSC02482.jpg

Fat bottom girl:

http://i134.photobucket.com/albums/q115/lgaff/DSC02484.jpg

http://i134.photobucket.com/albums/q115/lgaff/DSC02485.jpg

A few others observations, I am not saying that my wife and daughter stereotype their Italian heritage, but note on most nights, and in one of these photos, I am the only one in the house after 9pm not wearing a wifebeater T-shirt. Second, note the small Maltese on the doorway, Dominic...this is the dog I want the hit put on...I know of your work:-({|=

LGAFF
92 ZR1
#234

PS no comments on the exhaust being crooked, these things won't line up worth a@#$@!

[carter200]

Got the 18mm spacers on today!

How much were the spacers?

[LGAFF]

They were $170 delivered.

LGAFF
92 ZR1
#234

[carter200]

They were $170 delivered.

LGAFF
92 ZR1
#234

:jawdrop: Please contact me (CT Machining) next time you need machined items like that. I would have done it for $100 or so shipped. Not dogging you but giving you and others an option. Just ask Dwight, Jeffvette, Golden Cylon or others and they can vouche for my quality. Bye the way
nice Z. Sorry about the exhaust issue:(
Take care :handshak:

[LGAFF]

Sorry did not know you did spacers, maybe I missed that in one of my other posts.

Can you do pulleys????


LGAFF
92 ZR1
#234

[carter200]

You have a PM :mrgreen:

[jonszr1]

by the by you got her *** nailed .:jawdrop: to a tee . looks like vida garret in painted on jeans. justy gives ya one of these :D thinkin about it . now go out a strut your stuff!!!!!!!!!!!!!!!!!!!!!!!!

[LGAFF]

This puts the projects to a halt for awhile, looks like Goldcylon will be over in a few weeks to start the garage makeover as promised.



:wave:

LGAFF
92 ZR1
#234

[Paul Workman]

PS no comments on the exhaust being crooked, these things won't line up worth a@#$@!

NO comments from me - 'cept to commiserate wid ya!

It must be a "Borla" thing, huh?

http://i185.photobucket.com/albums/x220/6PPC_bucket/Vettes/ZR-1rearSmall.jpg

P.

[WVZR-1]

:jawdrop: Please contact me (CT Machining) next time you need machined items like that. I would have done it for $100 or so shipped. Not dogging you but giving you and others an option. Just ask Dwight, Jeffvette, Golden Cylon or others and they can vouche for my quality. Bye the way
nice Z. Sorry about the exhaust issue:(
Take care :handshak:

Hey Carter,

Everyone that has interest in any sort of an aftermarket wheel that is only done in an 11" 50mm offset can use these.

I had Fred do my spacers also to "my" specifications, the backside "counter-bore" is to my specification and the wheel side "hub flange" is also done to the specification I wanted for my "particular" wheel bore. There's nothing really generic about Lee's or mine. My spacer fit to the hub is "snug" much better than the factory wheel fit and the fit of the spacer to my wheel is "substantially" better than the fit of the wheel to the factory hub flange. The positive to the deal was: I emailed my specs afternoon on day 1, he called to confirm two dimensions the next day and the 5th day I had them i my hands, "left coast to east coast" with no "fancy" shipping! The product is first class and service AAA+.
I think Lee will agree! A conversation with Fred is "Priceless"!!

My spacers in '04 were a little less but not much. The $100 price point is sure interesting. I dropped plumb-bob at both quarters to confirm the rear was "square" in the chassis and had mine done in 16mm so I could drop the body substantially more and mentioned to Lee he might want to try maybe 18mm depending on the measurements he found. 14mm of course will duplicate ZR-1 (36mm) to GS (50mm) fitments.

-Dave

[-=Jeff=-]

PS no comments on the exhaust being crooked, these things won't line up worth a@#$@!

Are they tack welded at the back? if not I can probably give it a go to get them better..
Mine are not as bad, but I need to cut the tack welds to fix them
http://vettextc.jiminees.com/ZR-1/5-26-2008/images/DX6490_73.jpg

[LGAFF]

No they are not tacked, trying to line these up is near impossible, however it seems some bending is in order, they have been off since I bought the car. Maybe replacing the exhaust clamps would also help, they were reused when the X-Pipe was put in.

LGAFF
92 ZR1
#234

[carter200]

Dave,
Custom is the only way to go and people like me have a way better quality control then the big shops. Take care, Carter :hello:

[HADI-ZR1]

Lagff ,
1- the exhaust problem?? i have same as you with my BB !:dontknow:
the soulution : remove it and have fun:D .

2- $170 for spacers :jawdrop: .come on. i bought mine for $60 from ebay
the spacer are 1.5 inch to cover my custom wide rear quarter with rear callaway azz!

3- is the pink vette, stock or moded :icon_scra

[SDZR-1]

Well now i feel better....i bet i worked a solid 2 hours trying to get my borla symetrical on both sides and finally got it as close as I could and quit. I looks ok at best...but i alway notice it.

[Zr1 Destroyer]

PS no comments on the exhaust being crooked, these things won't line up worth a@#$@!Hey....your exhaust isn't straight...lol..j/k!


I lined mine up(after going through a bunch of different clamps) the best I could a simply tacked it with a welder.....it has never moved again!:dancing

[carter200]

I lined mine up(after going through a bunch of different claps)

:jawdrop: Now that sounds like a problem..........

[HADI-ZR1]

I saw you Zr1 Destroyer!! =D>
http://i128.photobucket.com/albums/p183/hadi-zr1/230857572_7665a1620d.jpg :mrgreen:

[Zr1 Destroyer]

:jawdrop: Now that sounds like a problem..........Clamps....:D

[HADI-ZR1]

Clamps....:D
:D Still you can use them!

[carter200]

Clamps....:D

So you say ;)

[Z51JEFF]

:jawdrop: Please contact me (CT Machining) next time you need machined items like that. I would have done it for $100 or so shipped. :
You have a P.M.

[carter200]

You have a P.M.

Back at ya on the PM............

[HADI-ZR1]

LGAFF what you did was great job and give bette look to your ZR !!:thumbsup:

If ANY ONE here interesting and want same spacer as LGAFF , i can machine it here and send it to you, i will be glad to do that if there is group order and send them from kuwait to a specific person in USA!
$ 55.00 for pair let me know . :)

Here is the one i did for my ZR , (1.5 inch thickness) in Kuwait, i had to machine this and cancel the set i order from USA, cuz i will not have it in time before i fly to CZECH REP.
http://i128.photobucket.com/albums/p183/hadi-zr1/DSC00484.jpg