PDA

View Full Version : 06Z06 braake pakage for C4ZR1

HADI-ZR1
06-09-2008, 05:04 PM
1- how much cost for 4 rotors 4 calipers?
i think jeffvette said he done that. any info. ? thanks.

2- is the Baer brake with the same rotor size is better?:neutral:
djpatrick35
06-09-2008, 08:31 PM
I thought it was for C5 Z06 not C6...
Polo-1
06-09-2008, 10:33 PM
Jeff has it.

http://i7.photobucket.com/albums/y292/kpie/C6_brake.jpg
RedSled
06-09-2008, 11:04 PM
Wheel / brake combo look awesome.
HADI-ZR1
06-10-2008, 01:19 AM
I thought it was for C5 Z06 not C6...
in his web said he carry 06z06 brakes for C4!:dontknow:

http://www.pnwzr1.com/images/Brakes/C6_Z06a.jpg
We offer a line of stock upgrades for the J55 calipers and have adapters for the C5 caliper and rotor conversion
or we do the C6 Z06 upgrade at all 4 wheels.

Though i perfer ’05 Corvette with the Z51 13.4-inch front and 13-inch rotors in the rear.
Z51JEFF
06-10-2008, 10:37 AM
Jeff has it.

http://i7.photobucket.com/albums/y292/kpie/C6_brake.jpg
What style of Fiske wheel is this?Does this wheel have a brushed finish with a clear coat?
Aurora40
06-10-2008, 07:43 PM
in his web said he carry 06z06 brakes for C4!
Just a thought, but have you tried asking him your questions? :cheers:
Aurora40
06-10-2008, 07:43 PM
What style of Fiske wheel is this?Does this wheel have a brushed finish with a clear coat? FM5, and it comes in several finishes.
tf95ZR1
06-10-2008, 10:26 PM
http://i7.photobucket.com/albums/y292/kpie/C6_brake.jpg


Congrats, Jeff!
That looks incredible!
Jeffvette
06-19-2008, 06:53 PM
Just a thought, but have you tried asking him your questions? :cheers:

No, he hasn't.
tf95ZR1
06-19-2008, 08:40 PM
Ok, at the risk of being a total moron:
Isn't the front rotor on the wrong side?
I thought the holes/slots were supposed
to be angled in the other direction.
:iamwithst
I have to get a life.......
Jeffvette
06-19-2008, 09:30 PM
Ok, at the risk of being a total moron:
Isn't the front rotor on the wrong side?
I thought the holes/slots were supposed
to be angled in the other direction.
:iamwithst
I have to get a life.......

Slots and holes pattern have no bearing on rotor rotation. Each company markets their design a little bit different. All that matters is the internal vanes to push/pull air from the center of the hub to the outer edge.
Polo-1
06-19-2008, 11:20 PM
That and Baer has a stamp on the rotor hat, Thats the way Baer wants it.:dontknow: