Video Post of Dyno Run

[LGAFF]

Thanks to Bob Stencel for the videos and great pics:


http://s134.photobucket.com/albums/q115/lgaff/?action=view&current=June12008DynoJetPulls.flv



LGAFF
92 ZR1
#234

[Paul Workman]

Awesome, Lee!!

[GOLDCYLON]

Nice run :cool:



What did the barbie car dyno at ? :razz:

[LGAFF]

Barbie vette dyno'd at 392rwhp......power to weight ratio is incredible.

LGAFF
92 ZR1
#234

[GOLDCYLON]

Barbie vette dyno'd at 392rwhp......power to weight ratio is incredible.

LGAFF
92 ZR1
#234


Power key was on!!!!!!!!!!!!!!:jawdrop:

[LGAFF]

Just talked to Randy at DRM, asked him about lean condition(I have a DRM chip), said no way it should do that even with my mods. Might be injector issues, I noted in another post I used SAP for my primaries, could have gone bad in a year I suppose.

LGAFF
92 ZR1
#234

[XfireZ51]

Just talked to Randy at DRM, asked him about lean condition(I have a DRM chip), said no way it should do that even with my mods. Might be injector issues, I noted in another post I used SAP for my primaries, could have gone bad in a year I suppose.

LGAFF
92 ZR1
#234

Lee,

Most tuners set their cals up to be on the rich side. Mine is a Marc Randolph cal and the initial pull on my motor with that calibration was in the mid 13s AFR. They'd rather foul plugs than blow pistons. 390rwhp is pretty healthy number to have an "issue". I would look at FP at WOT. Bottom line is putting scantool on it and see if it shows anything.
You did mention that you had smelled gas in the garage.

[LGAFF]

You did mention that you had smelled gas in the garage.

Yes, but I had Chili for lunch, and once I opened the garage door it cleared.


No you are correct, raw gas smell from the plenum when I cracked the TB open.

LGAFF
92 ZR1
#234

[-=Jeff=-]

you used a wideband o2 right? the Dyno owners Wideband? how do you know it is accurate? might not be. I would suggest if you are going to tune yourself, the Wideband will be a good investment.

otherwise, i think the problem is the loose nut behind the wheel :D

[Zr1 Destroyer]

Cool video......car looks mean on the dyno!!!

[LGAFF]

The Dyno was from a local tuner, always possible O2 was not accurate, however I would then think all would show as lean, vs just my car. I am going to retune, and dyno just to see.

I might also order the UD pulleys and go back and redyno, just to see if they do anything.

LGAFF
92 ZR1
#234

[-=Jeff=-]

The Dyno was from a local tuner, always possible O2 was not accurate, however I would then think all would show as lean, vs just my car. I am going to retune, and dyno just to see.

I might also order the UD pulleys and go back and redyno, just to see if they do anything.

LGAFF
92 ZR1
#234

Tune first
re dyno
UD pulleys
Tune
Redyno

in THAT order