ZR1registry Group buy (Stainless Works Headers)

[ZZZZZR1]

hey Members....


We will have a group buy (me included) on Stainless Works Headers and need to purchase by June 20th. I can't post the price, so please post here and let me know who is interested (I will PM or email you the price).

If you have a non LT5 / ZR1, you can still get "cost" on any Corvette out there. C4 / C5 / C6 / Z06 Also if you are interested in any exhaust system, you get the same % discount on anything available.

Visit http://www.stainlessworks.net/cart/index.php

The Club gets no $$$ or kickback, this is for Members Only please.....

Cheers!


"Drive it like you STOLE IT!"

[rogerzr1]

I would be interested if the price was right.:thumbsup:

[Aurora40]

you might email it to the registry list to get more exposure.

[ZZZZZR1]

you might email it to the registry list to get more exposure.

A group email will go out today or tomorrow. Just posting it here to see what response we get..... :thumbsup:

[Demps]

Cost on an x-pipe? Ted

[4DSZR1]

Count me in as interested

Thanks

Rick

[-=Jeff=-]

Sent you a PM

[ZZZZZR1]

All PM's responded too....

PM me for prices and discounts. We can do this twice a year.




Again this is a Group buy and all discounts go to our Members!

:thumbsup:

[IowaZR-1]

I'm interested.

[Z Factor]

A group email will go out today or tomorrow. Just posting it here to see what response we get..... :thumbsup:

I assume you mean on the listserver. If so just link this thread for those who do not normally come to the forum.

http://zr1netregistry.com/forum/showthread.php?t=5796

:cheers:

[Aurora40]

A group email will go out today or tomorrow. Just posting it here to see what response we get..... :thumbsup:
Just a reminder, there's two listservs, one is just for registry members, which sounds like the one you want. Can you include the price in it if you do it that way? I already have headers, but curious what the savings is.

[BOB HDZ]

me too!!!

[RedSled]

Put me in the serious maybe dept. Like to know price range. Thanks.

[bradslt5]

i have been lazy getting my dues in guess i will send them in tomarrow. me to please .

[cuisinartvette]

Can they be had with smog rails or is that somethign Haibeck would have to do?

[bradslt5]

ron i believe mark does this after he gets the headers from them . ps how ya been did ya get your new place yet

[tomtom72]

I too would be very interested in participating in this group buy.

PM sent, and thank you very much for taking the time to do this for our members!:thumbsup:

:mrgreen:
Tom

[Paul Workman]

Count me in! I'll make that one happen!!!

P.

[ScottZ95ZR1]

I am also interested - thanks !

[PhillipsLT5]

Already got em, but you guys won't be dissapointed with the music & power

[ZZZZZR1]

update:


We will be doing this group buy ONCE a year....


:thumbsup:

[IowaZR-1]

has the group e-mail(with prices) went out yet?

[ZZZZZR1]

Who is 100% on purchasing the Headers now?


I might be able to get them to purchase sooner... (I want mine asap!)


Cheers

:thumbsup:

[-=Jeff=-]

not me.. cannot do it now.. hopefully it will happen next year

[mbabbitt]

I'm interested. How much are they?

[cadillac531]

PM Sent.

Thanks
Constantine

[tomtom72]

I'm down for right now. :thumbsup:

Just tell me where & when to send the paypal!:mrgreen:

Will they allow us to buy the heat coating?:o

Thanks,
Tom

Also, another stupid Q ..... these headers will not come with the plumbing for the A.I.R. system & O2's, right? If not does anyone know where to get this stuff added.....NYS will not pass the car without this stuff.

[ZZZZZR1]

I'm down for right now. :thumbsup:

Just tell me where & when to send the paypal!:mrgreen:

Will they allow us to buy the heat coating?:o

Thanks,
Tom




Also, another stupid Q ..... these headers will not come with the plumbing for the A.I.R. system & O2's, right? If not does anyone know where to get this stuff added.....NYS will not pass the car without this stuff.


Tom,

You get the discount on everything you need... Coating, custom muffler, etc.

Not a stupid question @ all about other pieces (I asked that too)... I'm trying to get a complete package so anyone can install it. Should have a # by tuesday next week

Cheers!

David

[tomtom72]

Thanks Dave!:thumbsup:

I'm still in regardless.....it will just be a matter of salvaging the old A.I.R. plumbing and finding someone to weld up that stuff and the O2 bungs....for me anyway. Got to pass NYS emissions inspection...:mad:

If I only took that welding course.....:redface:

[bans25]

Can someone PM me the price?

[TN90-ZR1]

I'm definitely interested, but need to know the bottom-line before committing 100%. Thanks for putting this together.

[USAFPILOT]

Next year I am probably in for sure...go ahead and pm me the info for this deal though just in case.

[ZZZZZR1]

info on the headers:

90-95 ZR1 Corvette Headers. 2" tuned length primary tubes, 3/8" cnc laser cut flanges. Port Matched to factory cylinder heads with oval ports. No emmissions, air tube fittings, or catalytic converters-for off highway use only. These headers make awesome power and are dyno proven to make over 30 RWHP more than factory manifolds. Excellent fitting headers that will require some minor cutting and welding to connect to the factory exhaust system. Std. finish



They are making high flow cats (same discount) and also stainless steel (lifetime warranty) exhaust systems with different modes available (deep rumble, Agressive, HP / racing and moderate quiet). All products they have are @ our discount except the coating which they don't mark up.

We do have a package of Headers, Hi Flow Cats, and Exhaust system pricing available (Complete). These systems will be shipped ready to install.

No X pipe is needed, unless you are supercharging or turbocharging your Z.....

[karterdon]

What brands of exhaust systems are offered??? and how do we get a proce list??

Don Yoakem
91-#267 Dark Red Met
karterdon@aol.com

[DaveK]

I'm interested too, but probably another 'next year' guy.. would depend on the price.

[Glen Perronne]

I would be intrested in a set for my 91 ZR-1. Thanks Glen

[ZZZZZR1]

Update....


We have 7 confirmed members purchasing, we need 5 more.


I know we have a few people on the fence and we will need decisions soon so we "ALL" can get the group rate!

Questions please PM me :cheers:

Cheers

David

[tf95ZR1]

Just a thought-
Headers with freer flowing intake and exhaust:
Big Difference!

[IowaZR-1]

My plans for headers this year have been "washed" away with our floods here in Iowa.:( River isn't expected to crest(9' ^flood stage) here till tuesday and will be into one of our properties. Maybe next year on the headers.

[JIMSTAINLESSWORKS]

O.K. GUYS. THE ALL NEW SYSTEM DESIGNS WILL BE COMPLETED NEXT WEEK.

I HAVE TONS OF PICTURES OF OUR "SKUNKWORKS" PROTOTYPE FACILITY AND CREW. I ALSO HAVE PICS OF THE ZR1 WE ARE WORKING ON.

THE NEW SYSTEMS ARE ALMOST HERE.

EMAIL ME AT JIMSTAINLESSWORKS@WINDSTREAM.NET FOR PICTURES AND FINAL PRICING.

HAVE A GREAT DAY.

JIM

[xlr8nflorida]

O.K. GUYS. THE ALL NEW SYSTEM DESIGNS WILL BE COMPLETED NEXT WEEK.

I HAVE TONS OF PICTURES OF OUR "SKUNKWORKS" PROTOTYPE FACILITY AND CREW. I ALSO HAVE PICS OF THE ZR1 WE ARE WORKING ON.

THE NEW SYSTEMS ARE ALMOST HERE.

EMAIL ME AT JIMSTAINLESSWORKS@WINDSTREAM.NET FOR PICTURES AND FINAL PRICING.

HAVE A GREAT DAY.

JIM

I have SW HEADERS now bolted up to a borla. Depending on the product and how it sounds. I might want your system :D

[ZZZZZR1]

Jim just sent me pictures today to post:

One of the many cars they work on!

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/Stainless1.jpg

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless2.jpg

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless3.jpg

[ZZZZZR1]

Pictures of their facility (it's HUGE!!!!!!!!!)

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless10.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless14.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless20.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless19.jpg

[ZZZZZR1]

More pictures!

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless18.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless17.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless16.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless15.jpg

[ZZZZZR1]

Working on our new Headers.......


http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless8.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless7.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless6.jpg
http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless5.jpg

[Z Factor]

Nice shop and great pictures :thumbsup:

:cheers:

[ZZZZZR1]

Who needs pricing?

I have a new list of all of what is offered and created by Stainless.

Anyone I haven't sent this info, please post here or PM me

Cheers!

David

[4DSZR1]

Very nice shop.... looks like some of the manufacturing areas I see at the Boeing Co...

:)

[Hammer]

Send some pricing please.
Thanks

[ZZZZZR1]

Members,

Please PM me for our discount...

I'm asking Jim about Air Tubes (for State Inspections), and will know about that on the 28th.

Dyno info coming that day, with pictures of the whole system and audio of the exhaust.

Cheers

David

90-95 ZR1 Corvette Headers and Exhaust Systems EngineYear Retail

ZR1FACTCATZR1 headers with 2" primaries and 3" slip fit collectors and hi-flow metal matrix catalytic converters to fit factory connection points. Includes 3" ball socket and 3" bend and clamps. Up to 25 rwhp gains over stock. Mill finish. Fits factory exhaust or Stainless Works 3" exhaust systems (P/N ZR1C or ZR1S).ZR190-95 $1,587.00

ZR1CORVCATZR1 full length headers with 2" primaries and 3" slip fit collectors and hi-flow metal matrix catalytic converters with 3" lead pipes to fit Stainless Works 3" exhaust systems. Up to 25 rwhp gains over stock. Mill finish. Use with Stainless Works exhaust systems (P/N ZR1CHAMSW or ZR1STUBESW)ZR190-95 $1,587.00

ZR1CORV3/8ZR1 full length off road headers, with 2" primaries, 3" ball socket and 3" bend and clamps to connect to factory connection points. Up to 25 rwhp gains over stock. Mill finish. Fits factory exhaust or Stainless Works 3" exhaust systems (P/N ZR1C or ZR1S).ZR190-95 $1,272.23

ZR1CZR1 3" exhaust system to fit factory manifolds/ converters at factory connection points. Includes X-Pipe, Chambered turbo mufflers, polished tips, hangers and clamps. Fits Stainless Works headers (P/N ZR1CORV3/8 or ZR1FACTCAT).ZR190-95 $1,290.00

ZR1SZR1 3" aggressive sounding exhaust system to fit factory manifolds/ converters at factory connection points. Includes X-Pipe, S-Tube turbo mufflers, polished tips, hangers and clamps. Fits Stainless Works headers (P/N ZR1CORV3/8 or ZR1FACTCAT).ZR190-95 $1,290.00

ZR1CHAMSWZR1 3" exhaust system to fit Stainless Works full length headers. Includes X-Pipe, Chambered turbo mufflers, polished tips, hangers and clamps. Fits Stainless Works headers (P/N ZR1CORVCAT)ZR190-95 $1,290.00

ZR1STUBESWZR1 3" aggressive sounding exhaust system to fit Stainless Works full length headers. Includes X-Pipe, S-Tube Turbo mufflers, polished tips, hangers and clamps. Fits Stainless Works headers (P/N ZR1CORVCAT)ZR190-95 $1,290.00

[ZZZZZR1]

Update....


80% of people are asking about A.I.R tubes and we will know Monday. (lots more information coming out then)

Anyone on the fence, speak now!

The discount will only be offered once (that was confirmed).

:thumbsup:

[Paul Workman]

Update....


80% of people are asking about A.I.R tubes and we will know Monday. (lots more information coming out then)

Anyone on the fence, speak now!

The discount will only be offered once (that was confirmed).

:thumbsup:

This thread is getting so big...But, was there an answer on the A.I.R. accommodation? I feel I will need the capability to reinstall the system, should I move to CO or somewhere else where they would be required (not in IL - OBD-I, apparently!)

P.

[ZZZZZR1]

This thread is getting so big...But, was there an answer on the A.I.R. accommodation? I feel I will need the capability to reinstall the system, should I move to CO or somewhere else where they would be required (not in IL - OBD-I, apparently!)

P.

Paul....

Jim comes back on Monday and we will find out. :thumbsup:

[ZZZZZR1]

ok Members....


A.I.R. tubes are included with every sale (due to the huge response).

Gaskets are not included with the purchase (use your originals / they will fit).

I'm trying to get Stainless to extend the discount until Corvettes of Carlisle(Aug 23rd)......

:thumbsup:

Any questions, post here or PM me (Jim is back from his Vacation)

[tomtom72]

Thanks Dave!:thumbsup:

I'll take a set of headers with the A.I.R. tubes & O2 bungs, and the heat coating!:mrgreen:

If they sell specific s/s works exhaust gaskets as an option, please include a set with my order....this way I don't have to chase down parts. I like one stop shopping!

You have my CC info still, right?

Thank you to Jim and you for helping all of us out with this package!:worship:

tom

Dave put me in for a wide band O2 bung(s) also on my set.....if that is possible.

[Aurora40]

Thanks Dave!:thumbsup:

I'll take a set of headers with the A.I.R. tubes & O2 bungs, and the heat coating!:mrgreen:
Can't remember if it was mentioned. But it might be a good idea to get a 2nd O2 bung on one or both sides for a wideband. Better to have it done before they are coated, so the coating doesn't have to be stripped to weld the bung on later. :)

[z proud]

Will we have to have the air tubes welded on or will they be ready to go?........Thanks Dave
Keep us updated on shippment.

:thumbsup:

[Jeffvette]

Gaskets are not included with the purchase (use your originals / they will fit).


Do not reuse your stock gaskets. They are a graphite impregnated material and more than likely will be severely damaged after removal.


Can we order these with out the air injection crap?

[32valvZ]

SONOFABITCH!! I just bought a set of SW's at BG. I wish I had waited. I spent $1145. on the LT's & another $850. on a used set of B&B's!! Ouch!! My A S S!!!:mad:

[JIMSTAINLESSWORKS]

HELLO GENTLEMEN

AS FAR AS THE EGR AIR TUBES GO.

WE CAN ADD THEM OR MANUFACTURE THE HEADERS WITHOUT THEM. NO EXTRA CHARGE EITHER WAY.

THE HEADERS WITH EGR AIR TUBES WILL HAVE A 308 TIG WELDED STAINLESS STEEL FEEDER LINE WITH A HIGH TEMP AIR HOSE CONNECTOR WITH ALL HARWARE INCLUDED.

PLEASE EMAIL ME AT JIMSTAINLESSWORKS@WINDSTREAM.NET TO GET ALL THE LATEST UPDATES ON THE SYSTEM.

WE HAVE BOLT ON HEADERS FOR FACTORY EXHAUSTS AND ANY AFTERMARKET EXHAUST THAT FITS THE FACTORY CONNECTION POINT. WE ALSO HAVE A VERY NICE BIG H.P. PRODUCING SET OF HEADERS THAT GO TO OUR NEW 3" EXHAUST.

WE HAVE EXHAUSTS IN 3' TO FIT YOUR MANIFOLDS TOO !!!

JUST LET ME KNOW WHAT YEAR AND WHAT EXHAUST COMPONENTS YOU HAVE ON YOUR VETTE RIGHT NOW AND I CAN DIRECT YOU TO THE APPLICATION YOU NEED.

THE WHOLESALE FORUM SPECIAL WILL CONTINUE FOR JUST A LITTLE WHILE LONGER.

AFTER THAT THE ESTABLISHED RETAIL PRICES WILL BEGIN. THIS IS A REQUIREMENT OF OUR DEALER PROGRAM AND CONTRACT.

IF YOU HAVE EVER THOUGHT ABOUT GETTING A LIFETIME STAINLESS STEEL SYSTEM........... THIS IS THE WEEK TO DO IT.

ALSO..... TELL ME WHAT YOUR PERFORMANCE NEEDS ARE. WE CAN HELP.

MANY THANKS

JIM WATSON

[JIMSTAINLESSWORKS]

MANY OF OUR CUSTOMERS DO USE THEIR FACTORY ORIGINAL GASKETS WHEN INSTALLING OUR HEADERS.

YOU ARE ABSOLUTELY RIGHT ABOUT THE NEED TO HANDLE THEM WITH EXTREME CARE . ANY RIPS OR COMPROMISE WILL IN FACT CREATE A HUGE LEAK.

WE DO NOT PROVIDE GASKETS WITH OUR SYSTEMS.

GASKETS ARE LIKE BEER.........EVERYBODY HAS THEIR FAVORITE BRAND NAME THEY SWEAR BY.

WE TRIED IT ONCE AND NO TWO PEOPLE WANTED THE SAME KIND.

NIGHTMARE!!!!!!!!!!!!!!!!!!!!!!!!!!!

ANY HARDWARE NECESSARY TO INSTALL THE SYSTEM IS INCLUDED OTHER THAN GASKETS OR BOLTS (ANOTHER PERSONAL PREFERENCE ITEM).

EXHAUST SYSTEMS HAVE EVRYTHING YOU WILL NEED.

EVERYTHING IS A DIRECT BOLT ON SO NO WELDING/CUTTING/MODIFYING WILL BE NEEDED.

IF YOU DO USE YOUR USED GASKETS................BE CAREFUL AND INSPECT THEM WELL.

BUYING A NEW SET OF GASKETS MAY BE LESS STRESSFUL THAN PUTTING YOUR HEADERS ON TWICE!!!!

[ZZZZZR1]

Jim wanted me to add as well this regarding bolts (thanks Tom for his input)

MODFORDBOLTS or equivalent, which are shorter than some of the very long manifold bolts. They are (16) 8mm bolts x 1.25 long with 8mm washers.

Time frame on the headers will be much faster than anticipated.... They will have all systems out in the next 2 weeks!!!!!!!!!!

[JIMSTAINLESSWORKS]

I WANT TO THANK EVERYONE HERE FOR ALL THE INPUT AND COMMENTS. I WANT TO THANK DAVE HERE ON THE FORUM FOR ALL THE HELP.

HE HAS REALLY WENT ALL OUT TO BRING THIS GROUP PRICING AND NEW ZR1 HEADERS TO THE MARKET.

IT COULDNT HAVE HAPPENED WITHOUT HIM.

PRODUCTION IS GOING TO BE WAY AHEAD OF SCHEDULE. THINGS HAVE BEEN PUT ON HOLD AROUND HERE SO THAT I COULD PUSH THE ZR1 PROJECT FORWARD.

IT IS EXCITING TO SEE IT NEARING COMPLETION.

IF YOU HAVE TRIED TO CALL ME PLEASE DONT GIVE UP.

THEIR ARE TWO OF US HERE AT SW. WE FIELD A FEW HUNDRED CALLS A DAY.

PLEASE DONT GIVE UP.


ALSO...... FOR ANYONE LOOKING FOR A DEAL ON ALL YEARS OF CORVETTES AND THEIR COMPONENTS PLEASE CALL BRIAN HINSON AT HINSON SUPERCARS AT 205 267 6387.

HINSON SUPERCARS SPECIALIZES IN CHEVY LS MOTORS, TURBO SYSTEMS AND ALWAYS HAS AN ACTIVE INVENTORY OF CORVETTE HEADERS AND EXHAUSTS, TIPS, V BANDS, ETC ETC.

HE CARRIES S.W. HEADERS AND EXHAUSTS FOR ALL CORVETTE YEARS AND MODELS.

IF YOU GET A CHANCE, TIP YOUR HAT TO DAVE J.

ALSO GIVE BRIAN HINSON A CALL AND SEE WHAT GOODIES HE HAS IN STOCK.

[ZZZZZR1]

Ok members....


Last call on headers. Jim just told me today the sale Ends on 8/6 and will not be offered again.


Snooze you lose!

[-=Jeff=-]

Ok members....


Last call on headers. Jim just told me today the sale Ends on 8/6 and will not be offered again.


Snooze you lose!

I really wish I could order a set but it just is not the time.. guess I will pay full prcie when the time comes ..

Oh Well

[ZZZZZR1]

I really wish I could order a set but it just is not the time.. guess I will pay full prcie when the time comes ..

Oh Well

We will have permission to sell them on our site, but not @ the discount we had... But we will have a "lifetime" discount for ZR1net members.

New pictures....

[ZZZZZR1]

Pictures:

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/Stainless23.jpg

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless22.jpg

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless24.jpg

[xlr8nflorida]

Is there a video of the sound?

http://i160.photobucket.com/albums/t199/pennstatefootball/StainlessWorks/stainless24.jpg[/quote]

[tomtom72]

Okay my ignorance is showing.....:redface:

What's that green hose on the right header?

TIA:thumbsup:
Tom

[jonszr1]

air tube . can one still getin on the buy?

[ZZZZZR1]

Okay my ignorance is showing.....:redface:

What's that green hose on the right header?

TIA:thumbsup:
Tom
Per Jim:

THE GREEN HOSE IS THE EGR AIR TUBE FITTING.

IT IS A HIGH TEMP FLEXIBLE HOSE THAT IS MANUFACTURED FOR THE EXPRESSED PURPOSE

[Aurora40]

FYI, EGR and AIR are different. I believe only '93+ LT5's have EGR, but all of them have AIR.

[z proud]

orders for 90, 91 92 will not require that pipe for the egr.......Hope Jim is aware of it

[tomtom72]

Oh yea, the EGR.........at least that is one system I don't have to worry about.:mrgreen:

Thanks for the answer Dave!:thumbsup:

I think I'm like a 2 yr old waiting for santa to come with the presents....:mrgreen: :dancing

[RICKYRJ1]

For us guys who couldn't pull the trigger this year on these, what is the new price of admission going to be?:dontknow: Great effort Dave, Thanks

[ZZZZZR1]

Tomtom,

Can you post those companies that offer the bolts / gaskets for the Headers???

We have a few guys needing those. :thumbsup:

[tomtom72]

Aye, Aye Capt'n.......

http://www.zr1products.com/products.html this is a link to a complete install kit @ DRM......not sure if gaskets are included, sorry:redface:

http://www.zr1netregistry.com/forum/showthread.php?t=5726 This is from one of our member's research into just bolts.

I would like to say something as just a fwiw.....firstly a big thanks to Dave & Jim and the crew @ SSW for putting this deal together.....:thumbsup:

Secondly, I'm gonna contact our own Jeff, aka Jeffvette, and see what his install kits are about. I personally would rather spend the $ in the Brotherhood if I am spending it....I just would rather support some one that supports us.....JMHO......what do you guys think about this subject?

:happy1:

Tom

Just a FYI Jeff's kits: http://www.zr1netregistry.com/forum/showthread.php?t=6214

[z proud]

You can get the gaskets from Jerry........ a26b@aol.com (a26b@alo.com)

part# 10187776 @25.50 each look on parts for sale under gaskets