PDA

View Full Version : 10 PSI dyno numbers are in...

RHanselman
05-02-2008, 11:52 PM
OK here are the 10 psi numbers. We did two back to back and they were within decimals...

616.56 rwhp & 574.97 rwtq

We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds ;)

I want to give special thanks to the following:

Jerry Downey... without him this would not have happened!
Ron Woods
Marc Haibeck
Aaron Scott
Corey Henderson
Gil Nevarez Racing Products (his experience with race applications/mult ovhd cam eng builds/and tuning)

http://www.raptorllc.net/images/LT5/rebuild/10psi.jpg

http://www.raptorllc.net/images/LT5/rebuild/10psirpm.jpg
Jeffvette
05-03-2008, 12:00 AM
Looks good Ron. Can we get a graph mapping RPM instead of MPH?
XfireZ51
05-03-2008, 12:01 AM
616 at the rear???!!!! WOW!!!!:mrgreen:
WB9MCW
05-03-2008, 04:20 AM
VERY NICE GOOD JOB INDEED

http://www.turbo-power.com/images/frontimg.gif
tomtom72
05-03-2008, 08:42 AM
God bless you! Wow....just wow is all I can think to say on a motor that isn't 100% sorted out yet.:jawdrop:

I hope no one that has ordered a new ZR1 has seen this Ron.:)

Hummmm...lets see, new '09/ ZR1 about 125k out the door.....maybe?

an antique push rod free LT5 in say a fairly low milage, clean ZR-1, say a '90 = around 25k and add your fix to that and by my math you're under a 100k...waaay under 100k total $ spent!

:cheers:
Tom
GOLDCYLON
05-03-2008, 08:44 AM
Most impressive :wave:
32valvZ
05-03-2008, 09:30 AM
Soam Beetch! Nice. Great results :handshak:
IowaZR-1
05-03-2008, 10:04 AM
Sweet!!!!! let the fun begin!=D> =D>
GrayZ
05-03-2008, 10:55 AM
Awesome! i'm gonna tell SAnta CLaus what i want for Chirstmas.
Z Factor
05-03-2008, 11:17 AM
:cool: Keep us posted on the future results.

:cheers:
Demps
05-03-2008, 11:27 AM
Simply AWESOME!
RHanselman
05-03-2008, 11:46 AM
Looks good Ron. Can we get a graph mapping RPM instead of MPH?

Ask and you shall receive... I added it up top...
gbrtng
05-03-2008, 12:39 PM
Fantastic - look at the area under the curves !!!
Nick
05-03-2008, 04:26 PM
Pretty sweet, Ron. Congrats to you and all involved!:cheers:
32valve
05-05-2008, 11:08 PM
so when is the 19+psi dyno sheet showing up?:D
WB9MCW
05-06-2008, 11:10 PM
so when is the 19+psi dyno sheet showing up?:D


You must have missed this comment >>>

"We didn't get a chance to put the high flow pumps in so we stopped while we still had fuel. We'll change the pumps after BG and push her up a few pounds":happy1: