View Full Version : Interesting injector video from a guy on CF
Aurora40
03-30-2008, 12:04 PM
This was made by a guy who sells injectors, but it's interesting all the same. Didn't seem very sales-pitchy, but rather informative.
http://www.youtube.com/watch?v=Emnax2J4FX4
Zr1 Destroyer
03-30-2008, 01:07 PM
The Accell injector looks to be a good piece in that test. That's crazy how the gm multitech injector failed under a few more pounds of rail pressure! I wonder what the rail pressure is on an lt5 at wot?
Polo-1
03-30-2008, 01:33 PM
Just pull the vac line to fuel reg. and you will see. 43-45 psi. I run N2O that puts 5-7 psi on the reg. This spikes the rail pressure to 60-70 psi. NOT Good for the stock Multec's. I would like to the RC's in action. This is what I run.
tomcat
03-30-2008, 03:06 PM
This was made by a guy who sells injectors, but it's interesting all the same. Didn't seem very sales-pitchy, but rather informative.
http://www.youtube.com/watch?v=Emnax2J4FX4
Thanks for the Info.
Manfred E.......
91 #906 :hello:
Polo-1
03-30-2008, 03:32 PM
Thanks for the Info.
Manfred E.......
91 #906 :hello:
Hey Manfred, I think a new name for you is Rusty:D
Tell Jeff to stop breaking your Z..... It was running when you dropped it off:razz:
It's going to look Nice when he is done
I would like to see the RC's in action. This is what I run.
I'm pretty sure that RC's are the Lucas Disc type that he checked (3rd inj. over) it has more of a direct shot that the rest of the injectors tested.
Z Factor
03-30-2008, 05:53 PM
This was made by a guy who sells injectors, but it's interesting all the same. Didn't seem very sales-pitchy, but rather informative.
http://www.youtube.com/watch?v=Emnax2J4FX4
Good and interesting clip.:thumbsup:
:cheers:
tomtom72
03-30-2008, 06:27 PM
Thanks Bob it was interesting! :thumbsup:
GOLDCYLON
03-30-2008, 07:48 PM
neat clip wow how that original injector failed
Polo-1
03-30-2008, 10:05 PM
I'm pretty sure that RC's are the Lucas Disc type that he checked (3rd inj. over) it has more of a direct shot that the rest of the injectors tested.
They sell both disk and pintle desgin.
I run the PL 4-210 They show 30 psi to 100psi max.
So if it is a disk design they must use a stronger coil?
I know the big thing for me was the stainless steel guts, no rusty like the stockers.
GOLDCYLON
04-01-2008, 03:26 PM
I know the big thing for me was the stainless steel guts, no rusty like the stockers.
Me too my stockers were full of rust, running 205s myself.
Zr1 Destroyer
04-03-2008, 08:41 PM
The design three's look nice.....I emailed the guy to see what he has to offer for a zr1 if any besides the complete set he talked about on cf.
http://fuelinjectorconnection.com/shop/images/uploads/rebuilt/design3.jpg
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.