Ported plenum,injector housings,air horn & 63mm throttle

[mrcrowley]

Topic says it all!

All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it!

985-960-2483


EES, Inc. (www.acsvette.com)

EES, Forums. (http://eesvette.hyperboards.com/index.cgi)

[weelanddeal]

Topic says it all!

All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it!

985-960-2483

hello, what kind of gains can be made with these mods, on a stock motor, with b&b 3 inch triflow and a chip, thanks
EES, Inc. (www.acsvette.com)

EES, Forums. (http://eesvette.hyperboards.com/index.cgi)

[mrcrowley]

You should see anywhere from 400-415rwhp with what you just stated.

[Z Factor]

hello, what kind of gains can be made with these mods, on a stock motor, with b&b 3 inch triflow and a chip, thanks
EES, Inc. (www.acsvette.com)

EES, Forums. (http://eesvette.hyperboards.com/index.cgi)[/quote]


With what you have, plus headers and a good tune, you might reach 400rwhp

[Z Factor]

Topic says it all!

All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it!

985-960-2483


EES, Inc. (www.acsvette.com)

EES, Forums. (http://eesvette.hyperboards.com/index.cgi)

Hello, and welcome to the forum.

Do you have any pictures, and what if the potential buyer does not have any cores?

[blazerdude]

I have the rest of the motor that this plenum came off of. Is it still available? :???:

[Z Factor]

I have the rest of the motor that this plenum came off of. Is it still available? :???:

Hello, and welcome to the forum.

Your post really has me confused. What exactly do you mean :???:

[blazerdude]

What I meant to say was, I recently bought the motor that this particular plenum and throttle body came off of. It came from a 90' ZR-1 in Modesto,CA. The guy I bought it from, Dan Zertuchi, sent it to McCrowley for port and polish but, is doing a big block swap in his ZR-1 instead.So I'm guessing that instead of paying his balance owed to McCrowley,he just gave him the plenum. Since I have the motor now, I just wanted to see if the parts are still available. :???:

[Z Factor]

What I meant to say was, I recently bought the motor that this particular plenum and throttle body came off of. It came from a 90' ZR-1 in Modesto,CA. The guy I bought it from, Dan Zertuchi, sent it to McCrowley for port and polish but, is doing a big block swap in his ZR-1 instead.So I'm guessing that instead of paying his balance owed to McCrowley,he just gave him the plenum. Since I have the motor now, I just wanted to see if the parts are still available. :???:

I understand now, thanks.

I would suggest you email/PM the person in question for an answer to your question.

[mrcrowley]

The parts are still available. I thought I had them sold but the guy backed out at the last minute.

Mike

[90ZR1]

VERY TEMPTING but unless you have those parts until end of May, thats when i can afford them!

[blackjack]

are those parts still available?

[phrogs]

are those parts still available?

mike is a displaced at the moment thanks to the hurricane he lives mere miles from New Orleans so I think its going to be some time before he gets back to work

[WB9MCW]

I started a thread to/for mike where we can wish him well on the hurricane and its impact on him and his family and friends. It would be nice if a bunch of us zroners posted there wishing him the best.

MIKE'S HURRICANE THREAD ON ESS ZR-1 FORUM (http://eesvette.hyperboards.com/index.cgi?action=display&cat=welcome&board=welcome&thread=1125969961)

[blackjack]

hi
i know its been awhile,but i was wondering if the plenum was still
available?
blackjack