PDA

View Full Version : AVIC D2 Pioneer any one installed


GOLDCYLON
01-25-2008, 09:53 AM
Hello has anyone in the brotherhood installed an AVIC D2 Pioneer head unit in their ZR-1 or other C4? Im wondering if the radio bezel needs to be cut? Daryll

-=Jeff=-
01-25-2008, 10:30 AM
Check the Audio board on CF and DC, I am almost positive there are installs..

As for bezel cutting I can't remember

GOLDCYLON
01-25-2008, 12:40 PM
Check the Audio board on CF and DC, I am almost positive there are installs..

As for bezel cutting I can't remember

Ive been looking Ive seen earier C4 installs but the 90-93 is the traget. I dont want to have to destroy the bezel.

-=Jeff=-
01-25-2008, 03:53 PM
on CF in the top of the Audio board there is a stick with users systems listed..

check in there also do a searchin CF C4 Gen section.. All else fails email Bogus ( he is on C4guru) he would hopefully know

QB93Z
01-25-2008, 04:51 PM
I have the Pioneer AVIC D3 in a 1996 Corvette, and the Pioneer AVIC Z2 in my 1993 ZR-1. Both units fit fine with the original dash pieces and look great. I had several of the big retailers tell me they couldn't or wouldn't install a double DIN unit in a C4 Corvette. So, I got my local speed shop (Westminster Speed and Sound) to do it. In both cars the antennas (GPS and XM) are on the dash close to the windshield. On the ZR-1, I had to position the antennas near the "gap" in the windshield coating to get an adequate signal strength.

Jim