Parted another 90 ZR-1 out

[phrogs]

I am now deployed so small parts are not up for grabs right now they will be when I get home from Iraq.

I did advertise my car for sale but well see what happens with that I hope it is still around when I get home so I can finish it.

later

jp

[Corvette95]

oil dipstick and oil pan grommet?

[Aurora40]

I'd be interested in the black carpet insert that goes in the cubby behind the passenger seat, assuming it's in pretty decent shape. :)

[DaveK]

Still looking for a little 'L' shaped piece of metal that the center console top hook hooks into in the bottom part of the console.

[phrogs]

oil dipstick and oil pan grommet?

Going with the engine

[jrd1990zr1]

Any interior parts left?

[phrogs]

Any interior parts left?

what do you need

[HIZNHRZ]

Johnny,

I'd like to buy the clear lens that is in the lower part of each rear quarter panels. The ones I want are just behind the rear tires.

Also, thank you for your service to our country. God bless you and your family. Stay safe.

Scott

[Captain A]

Hi, need power keys and switch.:)

[flyin ryan]

Hi, need power keys and switch.:)i don't have one, but welcome aboard:hello: .

[phrogs]

Still looking for a little 'L' shaped piece of metal that the center console top hook hooks into in the bottom part of the console.

Yeah I have one Dont know what to charge for it.

make me a offer for it and well go from there ok.

[phrogs]

I'd be interested in the black carpet insert that goes in the cubby behind the passenger seat, assuming it's in pretty decent shape. :)

I know I have one but ill check it out.

Is this something you cant find? make me a offer for this little black carpet insert.

johnny

[phrogs]

Johnny,

I'd like to buy the clear lens that is in the lower part of each rear quarter panels. The ones I want are just behind the rear tires.

Also, thank you for your service to our country. God bless you and your family. Stay safe.

Scott

Scott, they went with the bumper

[phrogs]

Hi, need power keys and switch.:)

Power key and switch for a 1990 is $200 plus shipping

[Jeffvette]

John, how is the passenger side door glass?

[Z Factor]

Hi, need power keys and switch.:)

Hello, and welcome to the forum. :handshak:

:cheers:

[phrogs]

John, how is the passenger side door glass?

Ill check it I believe it has scratches but let me look

[flyin ryan]

[quote=phrogs]




http://i150.photobucket.com/albums/s103/zr1salvage/RareZR-1posters3.jpg


hey John, you want to part out that poster in the background? top dollar:mrgreen: .

[Captain A]

I am also looking for the oil cooler lines...?:)

[A1990]

I am also looking for the oil cooler lines...?:)
I'd get the ones from Kurt White.

[TonyTZR1]

John;

Looking for the secondary injector module, their are two of them located on the fire wall, I only need one. The P/N 10086284 or 10099210.I sold the car but told the new owner that I would be on the look out for one.

Third trip to Iraq, well, thank you for serving us and our country.

[phrogs]

[quote=phrogs]

hey John, you want to part out that poster in the background? top dollar:mrgreen: .


What do you think top dollar is for this poster.

[phrogs]

John;

Looking for the secondary injector module, their are two of them located on the fire wall, I only need one. The P/N 10086284 or 10099210.I sold the car but told the new owner that I would be on the look out for one.

Third trip to Iraq, well, thank you for serving us and our country.


well I can only see that 284 is carried by whiteracing products for $368.71

Ill sell this one for $250 plus shipping.

johnny

[flyin ryan]

[quote=flyin ryan]


What do you think top dollar is for this poster.PM sent.

[TonyTZR1]

I'll let him know.

Thanks;

Tony

[TommyL]

Johnny, Do you happen to have the air breather available?(Black plastic housing)... If so what is the condition? cost?

Contact me at kito@sympatico.ca

Thanks, Tom

[Captain A]

How about low tire pressure sensors?

[jrd1990zr1]

what do you need

Possibly the two rear hatch struts if they are OEM and rebuildable. Would want the 4 clips to hold them on and the two foam bumpers also.

Thanks

[phrogs]

Tom I do not have the large piece that the filter goes into. you can still order these from GM any 91 to 96 used the same one.


Johnny, Do you happen to have the air breather available?(Black plastic housing)... If so what is the condition? cost?

Contact me at kito@sympatico.ca

Thanks, Tom

[phrogs]

I have all 4 tire pressure sensors.
I usually ask around $150 a piece for these But Ill sell all 4 of them for $400


How about low tire pressure sensors?

[phrogs]

I have them with the clips and the rubber bumpers, They still have gas in them just not totaly strong.

and How would I know they are "original" any kind of markings to look for? I have the ones I took off of 2 different cars.



Possibly the two rear hatch struts if they are OEM and rebuildable. Would want the 4 clips to hold them on and the two foam bumpers also.

Thanks

[jrd1990zr1]

I have them with the clips and the rubber bumpers, They still have gas in them just not totaly strong.

and How would I know they are "original" any kind of markings to look for? I have the ones I took off of 2 different cars.

PM sent

[EuroPete]

Do you still have the plastic part that surrounds the Radio, Power Key Switch, Electronic AC control? I need to replace mine because it was cut to install an analog watch just below an Alpine Radio CD.

Thank you.

[phrogs]

Do you still have the plastic part that surrounds the Radio, Power Key Switch, Electronic AC control? I need to replace mine because it was cut to install an analog watch just below an Alpine Radio CD.

Thank you.

Yep $150 plus shipping without the cylinder or the key

jp

Hey i just listed one on ebay for $50 trying to get some bidding going

[32valvZ]

Do you have the plate that covers the front of the tranny....the inspection cover......1/2 moon shaped & 2 bolts hold it on.

[phrogs]

Do you have the plate that covers the front of the tranny....the inspection cover......1/2 moon shaped & 2 bolts hold it on.

I do not have a spare but there is one on ebay right now!

[32valvZ]

been lookin' ....where?

[phrogs]

been lookin' ....where?

320219925972

[EuroPete]

Yep $150 plus shipping without the cylinder or the key

jp

Hey i just listed one on ebay for $50 trying to get some bidding going

I assume the one you listed there under zr1salvage user ID was a different one, right? Can you send me some pictures of the bezel to tio.Pete@gmail.com? Just want to check its present shape before. Thanks!

[jefuller]

Looking for

1. lug nut wrench extension GM 10180890 (not the key socket)
2. ALDL plastic cover GM 10344031 (where the computer code reader hooks up)
3. grey fabric/elastic/velcroed holder for the lug nut key socket, supposed to sit in the center armrest console GM 10064306
4. PKE key fob (mine doesn't work well)

Thanks
J. Fuller (800) 567-6687 eastern time

[WVZR-1]

The ALDL cover part # is 10021766 and is still available for less than 4.00 at retail! The part # you posted is for an IP bolster for a Lumina APV, Pontiac Transport etc.

I believe JP(phrogs) is deployed now.

[jefuller]

Appreciate the corrected part number. Yeah, my local parts counter was coming up with $73.85 for the wrong number I was giving them. Will try again. I guessed JP was back at the war, but was hoping someone else like you might see the post and give me some clues. Thanks a bunch!

[phrogs]

Looking for

1. lug nut wrench extension GM 10180890 (not the key socket)
2. ALDL plastic cover GM 10344031 (where the computer code reader hooks up)
3. grey fabric/elastic/velcroed holder for the lug nut key socket, supposed to sit in the center armrest console GM 10064306
4. PKE key fob (mine doesn't work well)

Thanks
J. Fuller (800) 567-6687 eastern time


Its funny after 4 ZR1s I have never once seen a lug nut wrench extension
you have info on the cover,

Dont have the velcro holder and

no pke fobs until 93 models.

jp

[Jeffvette]

Looking for

1. lug nut wrench extension GM 10180890 (not the key socket)
2. ALDL plastic cover GM 10344031 (where the computer code reader hooks up)
3. grey fabric/elastic/velcroed holder for the lug nut key socket, supposed to sit in the center armrest console GM 10064306
4. PKE key fob (mine doesn't work well)

Thanks
J. Fuller (800) 567-6687 eastern time

I may have a lug nut extension. I need to dig through some boxes.... lots of boxes.

Jeff

[jrd1990zr1]

Appreciate the corrected part number. Yeah, my local parts counter was coming up with $73.85 for the wrong number I was giving them. Will try again. I guessed JP was back at the war, but was hoping someone else like you might see the post and give me some clues. Thanks a bunch!

Sounds like you are doing the NCRS thing based on your wish list. You can make the holder by stitching the velcro and elastic together. Use your old one as a pattern for the stitching and the material type and size. :cheers:

If you don't have one send me a PM and I will send a digital photo, assuming I can figure out how to post one.

[jrd1990zr1]

Its funny after 4 ZR1s I have never once seen a lug nut wrench extension
you have info on the cover,

Dont have the velcro holder and

no pke fobs until 93 models.

jp

JP,

Question, what do you do with all the fasteners, screws, body bolts, etc. when you part one out? I have been looking for some of the original fastners. Can't get them from GM now. If you would consider throwing them into a box, I would consider paying a reasonable cost to ship them to me.

Thanks, :cheers:

[phrogs]

JP,

Question, what do you do with all the fasteners, screws, body bolts, etc. when you part one out? I have been looking for some of the original fastners. Can't get them from GM now. If you would consider throwing them into a box, I would consider paying a reasonable cost to ship them to me.

Thanks, :cheers:


I have a ton of hardware but Im In Iraq right now.
Most of it would need to be sent out to be re plated but it is original hardware. I have about 2 coffee cans full of bolts, nuts, washers, and screws.

[jrd1990zr1]

I have a ton of hardware but Im In Iraq right now.
Most of it would need to be sent out to be re plated but it is original hardware. I have about 2 coffee cans full of bolts, nuts, washers, and screws.

Johnny,

When you get back to the states drop me a note. If the price is right I don't mind having them re-plated.

Thank you, we appreciate your service to our country.

Best Regards, John :cheers: