who ports heads without having to......

[bradslt5]

have the car sent to them ? i dont have enough in my budget to send the car to someone most of the tuners only do the porting if they have the car . does anyone port these heads without having to send the car.it doesnt have to be a quick thing . i have just purchased an extra drive train . thankyou for any help you can give

[tccrab]

JeffVette & LocoBob.
http://www.pnwzr1.com

[bradslt5]

they want the car to port the heads. at least thats whats on their web site . i cant afford to pay someone to do work i amcapable of doing. but thankyou for your help

[carter200]

www.acsvette.com (http://www.acsvette.com)

[bradslt5]

thankyou carter I will give him a call.

[carter200]

Brad,
Mike is a great guy and will treat you right. Tell him I sent you and he'll be sure to "add" 50% to the tab, lol. Good luck :cheers:

[Bell Curve]

i cant afford to pay someone to do work i amcapable of doing.

:rolleyes: dude that makes no sense,,,if you can do it yourself then why ask for advice on where to send it:confused:

[bradslt5]

I am sorry, what I can do is taking the motor apart and putting it back together after the heads are ported . i have never ported heads . but i have built a few motors in my 60 yrs . timming the dams might be a little scary but i gotta believe that if one takes his time and is carefull it can be done .

[cuisinartvette]

Cory wont do them for you?

[bradslt5]

sorry for the spelling errors . darn gotta start wearing the glasses

[Jeffvette]

they want the car to port the heads. at least thats whats on their web site . i cant afford to pay someone to do work i amcapable of doing. but thankyou for your help

I will pipe up on my business as well as Marc and Aaron. porting the top end is one thing with having the parts shipped to you and doing the work and sending it back out. Most people will not screw that up. It's simple.

Cylinder heads are another. Having the tools and the knowledge of doing it correctly, getting the timing right where you don't crush valves the first time you turn the key over is a different story. If something bad happens when you put it back together you are screwed. When one of us does it, we fix it.

We want all of our projects to come out correct for the customer. It sucks delivering a car to somebody who is 1,000-3,000 miles away and we are stuck.

Tell you what brad, box them up and send them out. PM me for my address and send a check with the heads.

[bradslt5]

Am I suppose to send a blank ck:mrgreen: . how much ? Corey henderson does not port heads only injector housings and plenums. head are sent out

[Jeffvette]

1,550 total including shipping back to you.

[cuisinartvette]

Am I suppose to send a blank ck:mrgreen: . how much ? Corey henderson does not port heads only injector housings and plenums. head are sent out
They will do a great job for you..Gonna do the top end and powdercoating too?

[GOLDCYLON]

1,550 total including shipping back to you.

Thats a steal! Jeffvette and Locobob did mine and I am very happy with the end result.

[kenthompson]

1,550 total including shipping back to you.

Damn it, find me some IH's and plenum, boy!!!!
:)
KT

[Jeffvette]

Damn it, find me some IH's and plenum, boy!!!!
:)
KT

I've got the injector housings. I might have a plenum.

[bradslt5]

I must say that is a very fair price. Just gotta get the heads off . i will be done moving next week . guess I got to get in gear. . would have to powder coat also . packing suggestions?

[Jeffvette]

Ship heads seperate. They weigh about 40lbs a piece and need to be wrapped extremely well.

[blackjack]

i have a plenum & ih from a 1990
bj

[kenthompson]

i have a plenum & ih from a 1990
bj

How much? how much to ship to jeff?

[FU]

1,550 total including shipping back to you.

This is a steal guys ! Take advantage of it while the offer is on the table .

[blackjack]

lets see if jeff can come out with a plenum first,'cause i dont want to split the kit.
bj