36mm Ball Gage

[XfireZ51]

OK. Winter is coming and the project is porting the IH/Plenum and heads. Where do you get the famous 36mm ball gage to check port size?

[-=Jeff=-]

http://www.mcmaster.com/

There are a couple close on that website..

[cuisinartvette]

THink I bought both a 36 and 37, or 36 and 38, cant remember. Makes a hell of a weapon when dumped in a sock, too. :rolleyes:

[8upZR1]

I was looking for one of those, but couldn't find it on Mcmaster website. Do you remember what name they are listed under?

[Ccmano]

The heads? Are you doing the just the port matching or going after the whole head to improve flow?

Hans
:cheers:

[XfireZ51]

Hans,

At this point, looking to port match them.

[-=Jeff=-]

The heads? Are you doing the just the port matching or going after the whole head to improve flow?

Hans
:cheers:

For the heads it is almost worth it to send them out..

[XfireZ51]

Here's a thought

http://www.gamesforfun.com/cgi-bin/gt/tpl.h,content=112&comm_product=239&
Checking to see if they have smooth ones.:wink:

[kenthompson]

http://www.mcmaster.com/

There are a couple close on that website..

Can't find any that are 36 MM, but 1 7/16" gets awfully close

[Pete]

Can't find any that are 36 MM, but 1 7/16" gets awfully close

I agree 1 7/16" is just shy of 36.5 mm
Dom,if you order from Mcmaster order me a 1 7/16" i'll pay you for it.

Thanks
Pete

[XfireZ51]

I agree 1 7/16" is just shy of 36.5 mm
Dom,if you order from Mcmaster order me a 1 7/16" i'll pay you for it.

Thanks
Pete

OK.

kenthompson,

Under what category did you find that in the catalog? Do you have the link?

[Pete]

Thanks Dom
Here is the part number for the 1 7/16" ball
9528k63 $13.25 for 2

When you get them please be gentle with my balls :D

Pete

[XfireZ51]

I agree 1 7/16" is just shy of 36.5 mm
Dom,if you order from Mcmaster order me a 1 7/16" i'll pay you for it.

Thanks
Pete


Pete,

Actually, it converts to 36.51mm. Just that little bit more air.
OK. On their way. I'll let you know when they get here.
There's 2 to a pack so we can split it.

[kenthompson]

Thanks Dom
Here is the part number for the 1 7/16" ball
9528k63 $13.25 for 2

When you get them please be gentle with my balls :D

Pete

OUCH!

[Pete]

Pete,

Actually, it converts to 36.51mm. Just that little bit more air.
OK. On their way. I'll let you know when they get here.
There's 2 to a pack so we can split it.

Yes your right, after i did the math i also got 36.51mm

By the way we might go to Union Grove this Sunday,Me ,Bob and Kevin.

Thanks Dom

Pete

[-=Jeff=-]

HEY!!!! quit talkign about BALLS.. LOL

Dom, now the work begins.. LOL

[lbszr]

Thanks for info. Got mine today, order took less than 24 hours. Everybody locally to me wanted to sell bulk of 100 or so.