Fuel pump assembly

[mimzr1]

Howdy! Is there a magic trick for pulling the fuel pump assembly out without bending or breaking something?

[Jagdpanzer]

Easy job, check out:

http://mywebpages.comcast.net/zrjuan/sender.html

http://zr1netregistry.com/Old_Proj/old_proj11.htm

http://zr1netregistry.com/fuelpump.htm

[A26B]

Howdy! Is there a magic trick for pulling the fuel pump assembly out without bending or breaking something?

It's mainly a trial & error, lifting, turning & leaning the assy until it comes out. Primarily be concerned with the float & float arm to not bend it. The snags are mostly due to the plastic hose clamps & the big "latching mechanism on them. I replaced mine with small, worm-screw clamps, placing the screw more towards the interior of the assy to prevent hanging up going back in. Went in a lot easier than coming out.

[4DSZR1]

...I replaced mine with small, worm-screw clamps, placing the screw more towards the interior of the assy to prevent hanging up going back in. Went in a lot easier than coming out.

Good tip!