Group Purchase Coilover set up

[Jeffvette]

I've had a few guys who have asked me for a coilover conversion so I thought I would see if any others would like to do a set up.

This will be the DRM kit. Includes hats, mounting perches and springs .Instructions will be included and I can prefab the upper shock mounts so you will only have to do some minor work on the rear. You will need to send out your shocks for machining to cut the groove for the lower mount. You can use stock valving or upgrade to a stiffer set up.

I need to do 5 kits total. I'm getting one kit for my race car, and have two others sold. So I need two more people to pipe up.

Forgot to add, GP price 825 plus shipping. This is 170 off of the listed price.

[jonszr1]

jeff, count me in for 1 set. when do you need the cash . thanx brad . e mail me @jonszr1@myway.com

[Aurora40]

Hmm, I feel like this is the kind of thing I might someday want to do, and thus might regret not getting in on it while the parts are cheaper and/or available at all (I think that about them C5 brake adapters too though).

I'm guessing some decision on spring rates is needed in order to order a kit?

[Jeffvette]

Bob I can guide you through a spring rate choice based upon how you use the car. Give me a shout or drop me a PM.

Jon, I'm hoping to have this order done by July 6. So I will need payment around that time.

[Aurora40]

Bob I can guide you through a spring rate choice based upon how you use the car. Give me a shout or drop me a PM.
PM sent. Thanks Jeff!

[Polo-1]

I'll do a set.

Are you doing the shock machine work or do we need to find some one?

And I"ll take the modded top mount too:mrgreen:

[Notorious]

Is there a link to this set-up? Does it use the QA1 shocks?

[Jeffvette]

It uses Bilstein shocks. Either FX3 or regular Bilsteins.

http://www.pnwzr1.com/images/Suspension/C4_coilover.jpg

[Notorious]

Bummer.

[jonszr1]

thanx for the offer . after thinking about it am going to farm this out.

[4DSZR1]

Cool setup

Jeff, when you do coilovers on the front does one or should one also do the crossbrace that connects the frame ust in front of the engine? Is there a torsion issue you have to worry about?

Be a great upgrade.

[Jeffvette]

Rick, no other upgrade is needed to tie the front end together. No issues have been had with these. DRM used them in racing and several others have used them on the street with no problems as well.

[whale]

Jeff, I might be intrested also. I did talk to Randy about this to find out if the kit had been updated. I have this kit on the 415. My rear spring on the twin turbo is weak and needs to be replaced. The 415 has the Bilstein shocks with custom valving. What is your kit made up with. Thanks, wayne

[Jeffvette]

Wayne, this is the DRM kit. It should be exactly the same as what you have on your 415 car.

[whale]

Jeff, let me check on the re-valving and spring rates for the car and I will let you know. I need to check the 415's setup. wayne

[Jeffvette]

Sounds good Wayne.

[Peaven]

I almost emailed you on this Jeff, smokin' deal it is....unfortunately, I had to show restraint since I'll be happy just to hang on to my Z right now. Oh well, I'd rather have a ported and pc'd top end 1st anyway.:-({|=