WTB: 94-95 Radio Bezel

[Jcsws6]

Looking for a 94/95 radio bezel with switch. Please let me know if have one available.

[Rick Gibbons]

I saw this on ebay

https://www.ebay.com/itm/143338340320?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=HGQIcB1mTzq&sssrc=4429486&ssuid=GigsdG4oTAO&var=&widget_ver=artemis&media=COPY

[Rick Gibbons]

Just realized it was for a LT1 car. You probably already knew about these. Not sure if the reproducer offers one with the cut out for the power switch.

[efnfast]

Mirrock?

[scorp508]

Mirrock?

I am looking for the same part. When I talked to Mirrock at Corvettes at Carlisle he laughed and wished me luck. Which... is true. We're looking for a part less than 1,000 were made. :)

[Jcsws6]

I am looking for the same part. When I talked to Mirrock at Corvettes at Carlisle he laughed and wished me luck. Which... is true. We're looking for a part less than 1,000 were made. :)
Agree, I've seen a few people looking for them over the years as well. I dash/interior swapped a 90 so I still have the "full engine power" light. I'm planning on making a bezel for now.

[scorp508]

I just removed my radio bezel with switch from my 95. I would consider selling it. PM me your email and I will send over photos to see if you are interested in working a deal.

Craig, since it is already off the car would you be willing to take some photos with a ruler? Preferably a metric one w/mm, but if all you have is American freedom units that's fine too. :lol: If I can't get a correct one then I may modify a non-ZR1 vehicle one.

Diameter of the switch tumbler hole.

Distance of the hole's left-most most point to the left of the bezel.

Distance of the hole's bottom-most most point to the bottom of the bezel.

Distance of the hole's top-most most point to the radio head unit opening.

Ruler next to the font to try and recreate the font/size with an aftermarket sticker.

Thanks!

-b

[HAWAIIZR-1]

Sorry, the OP was not interested and I?ll just keep the bezel and switch.

[scorp508]

Sorry, the OP was not interested and I?ll just keep the bezel and switch.

If you change your mind please let me know. Cheers.

[HAWAIIZR-1]

I was asked about photos and other information so here they are. I am leaving for Hawaii tomorrow and can ship from there if an appropriate offer for it.

[HAWAIIZR-1]

Power or valet key.

[HAWAIIZR-1]

Looking for a 94/95 radio bezel with switch. Please let me know if have one available.

Just curious why you asked for these parts and no response? Thanks.

[HAWAIIZR-1]

The flaws.

[Jcsws6]

Just curious why you asked for these parts and no response? Thanks.

Hey Craig, I didn?t catch your reply but sent you a message.

[HAWAIIZR-1]

Hey Craig, I didn?t catch your reply but sent you a message.

Sorry, no message from you yet. I think the bezel is sold and I forgot to bring the switch with my unexpected departure to Hawaii.

[HAWAIIZR-1]

All, the bezel is sold. Thank you for your interest.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[-=Jeff=-]

I dash/interior swapped a 90 so I still have the "full engine power" light.


How far did you go with the dash swap meaning, how much did you have to swap?

[aafc]

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.php?albumid=493&pictureid=4572
You may have to click on zr1.net/forum to see
John

[HAWAIIZR-1]

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.php?albumid=493&pictureid=4572
You may have to click on zr1.net/forum to see
John

Hey John, I like your power key on info. I remember yours and I almost did something funny as you did. The 90s are easy to mod from a stock bezel, but the late model is a little more challenging with the huge switch and light hole, but I managed to build a support in the back for the switch. It?s not purdy, but can?t be seen.

[Jcsws6]

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.php?albumid=493&pictureid=4572
You may have to click on zr1.net/forum to see
John

That?s awesome! I?m actually pretty close to finishing my own as well, thanks for sharing!

[Jcsws6]

How far did you go with the dash swap meaning, how much did you have to swap?

I swapped everything but the harness. It was a lot of work but turned out great.

[GOLDCYLON]

I swapped everything but the harness. It was a lot of work but turned out great.

Did you buy Craig's bezel ? :cheers:

[Jcsws6]

Did you buy Craig's bezel ? :cheers:

It?s a funny story but no.

[GOLDCYLON]

It?s a funny story but no.

Are you still looking or can I close this post? Thanks GC :cheers: