Besides AFR/Lambda, what gauge do you wish you had?

[scorp508]

I'm looking to add a DLG-1 to my '94 to have Lambda/AFR readings on both banks. While I'm in there (famous excuse) what secondary gauge would you say is most helpful to have? Fuel Pressure? Vacuum?

https://www.innovatemotorsports.com/dlg-1-dual-lambda-afr-gauge-kit.html

I'm open to suggestions other than the DLG-1 if you have something you like. :cheers:

[Raykahn]

When I bought my car it had vacuum and fuel PSI gauges. Real nice analogue pair from Stewart Warner. I've replaced the Vacuum gauge with AFR now since I've been playing with the tune. I don't think I'd want to get rid of the fuel PSI gauge, it feels too useful for troubleshooting. I'd only change it to match the brand/style with my new gauge.

My AFR gauge is from the Glowshift 10-color digital series. I went with it because you can set it to a shade of orange that is close to the dash, and I have been happy with it.

[tpepmeie]

I agree on the FP gauge. I might want to see manifold pressure on the digital gauge, that way it?s quick to check out what part of the fuel map you?re in while observing the lambda in real time.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[HAWAIIZR-1]

I have DLG-1 and FP.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[scorp508]

Hawaii, did you add two new bungs, or use the DLG?s optional narrowband outputs to replace the stock sensor inputs to the ECM?

[HAWAIIZR-1]

Hawaii, did you add two new bungs, or use the DLG?s optional narrowband outputs to replace the stock sensor inputs to the ECM?

Two new bungs for the WB sensors with stock sensors to ECM.

[XfireZ51]

I have been using the Zeitronix ZT-2 for many years. I have a digital gauge on the console that reads Lambda, AFR and allows for two other values to be displayed, ie I have MAP voltage as one of those.

[scorp508]

I have been using the Zeitronix ZT-2 for many years. I have a digital gauge on the console that reads Lambda, AFR and allows for two other values to be displayed, ie I have MAP voltage as one of those.


Thank for this as I had never heard of them before.

This is an interesting option. It would allow AFR/Fuel pressure in a single gauge.

https://www.zeitronix.com/Products/ZR-2/ZR-2.shtml