FS: Parting out 90 #226 Drivetrain + Everything Else Available via Requests

[phrogs]

UPDATED 1/26/2025


I am parting out 90 ZR-1 #226 with 40,469 miles Black on black.

Please make any requests for parts in this thread. I will post photos and price shipping not included.
Payment via cash or bank transfer, if you want to use PayPal you pay fees or send friends and family same with venmo. All parts sold as is where is no warranty implied or offered these are used parts.

Complete running LT5 with engine harness and all associated computers including ECM has new spark plugs, new coils and used accel injectors , include the thermostat housing. $9999




Dana 44 3.45 gears with batwing $1650
Or Complete rear end assembly brake to brake $2000

Front suspension
k frame brake to brake $1500
Shocks need rebuild and all the rubber should be replaced.
or part out let me know what you need

Other parts for some prices. I will beat anything on ebay if you found it somewhere else lets talk I will save you and I paying ebay fees for used car parts.

Drive shaft $200
Drive line beam $100
FX3 actuators $150 each
AC Vacuum Control Programmer HVAC located behind dash $399
wiper motor $150
90-92 Oil pan with baffle $450
AC Blower Motor Evaporator Box Air Condition Housing 1990-1995 with slight damage on engine side see photo $300


Sold parts, seats, carpet, ABS pump, trans, passenger door drivers has damage, hood damaged, windshield, fuel pump assembly, Rocker panels, Washer bottle, driver info panel, power steering cooler, Radio bezel, air bag and frame sensors. front rear wheel well pass side.

Please post any requests you have I have a surplus of small parts like lights, harness, trim, ac vents ect so ask away for anything you might need.


All my parts are from 90 and 91 ZR-1s.

[scorp508]

Time to update that signature. ;)

[jyj]

Rear bumper and rt rear quarter available?

[phrogs]

Rear bumper and rt rear quarter available?


Yes they are

You want the lights and trim with it? Just a straight take off?
That will determine the price.
A stripped down bumper without lights and trim and the RH rear quarter id do $1500 plus shipping and crating or boxing this would have to ship via truck unless you want to pick up in person.

Let me know

[mlipmd]

Taking the interior apart? Have a working radio? Mine's good, CD and cassette work well - both repaired -but radio has static and it's not the antenna or connection. Thought maybe I'd just replace it instead of sending it out again.

[phrogs]

Taking the interior apart? Have a working radio? Mine's good, CD and cassette work well - both repaired -but radio has static and it's not the antenna or connection. Thought maybe I'd just replace it instead of sending it out again.

I don't think you need a new radio sounds like amps or the CDM are bad.

As for the radio in this car I have two radios untested all the amps were checked and were all bad some had corrosion so they were trash and the CDM had corrosion on its board.

[mlipmd]

I already had all 4 amps and the CDM repaired. A CD and cassette sound great in my stereo but the radio itself has poor reception and static. The antenna connections have been taken apart and cleaned and plugging a new external antenna into the radio does not help. That's why I was looking to see if you had a functioning radio.

[phrogs]

I already had all 4 amps and the CDM repaired. A CD and cassette sound great in my stereo but the radio itself has poor reception and static. The antenna connections have been taken apart and cleaned and plugging a new external antenna into the radio does not help. That's why I was looking to see if you had a functioning radio.


I will have to test this radio in my car, as the speakers were all bad in the parts car. I will let you know if it works.

[phrogs]

I already had all 4 amps and the CDM repaired. A CD and cassette sound great in my stereo but the radio itself has poor reception and static. The antenna connections have been taken apart and cleaned and plugging a new external antenna into the radio does not help. That's why I was looking to see if you had a functioning radio.



So, out of three radios I have

The one from the parts car is showing LOC on the screen and I have no idea what the code is.

Second one from my car CD player doesn't work

Third is a Black faced 1992-93 stereo works great cd player and tape deck work and the stereo works. Just the wrong face color.

Sorry I can't help

[MINDYLE]

I only need the ECM. Is it still available?

[phrogs]

I only need the ECM. Is it still available?

you're talking to me on facebook :thumbsup:

[tempac]

PM sent.

[mlipmd]

"Third is a Black faced 1992-93 stereo works great cd player and tape deck work and the stereo works. Just the wrong face color."

I thought all the radios have a black face. Can you post a pic of that one?

[phrogs]

"Third is a Black faced 1992-93 stereo works great cd player and tape deck work and the stereo works. Just the wrong face color."

I thought all the radios have a black face. Can you post a pic of that one?


oh no, 90-91 was grey with Orange letters, 92-93 were black faced and Orange letters 94-95 was black with white letters.

I can take a photo of them side by side tomorrow and post it.

[phrogs]

"Third is a Black faced 1992-93 stereo works great cd player and tape deck work and the stereo works. Just the wrong face color."

I thought all the radios have a black face. Can you post a pic of that one?

90 on bottom 92-93 on top

[AH-ZR1]

I am in search of the ever elusive Rear License Plate Surround Frame.
Would you happen to have one?
Thanks.

[phrogs]

I am in search of the ever elusive Rear License Plate Surround Frame.
Would you happen to have one?
Thanks.

No, sorry this car didn't show up with it. I do believe someone is making repos. check the fourm.

[MRBOHN23]

Do you have the shifter console bezel?

[phrogs]

Do you have the shifter console bezel?

Ill post some photos.

[phrogs]

Do you have the shifter console bezel?



I have a few of them All have some imperfections the middle one in the photo I was preparing to paint so I had scuffed it up with scotch brite and taken it apart, I have the door and the cig lighter. I never sprayed paint on it as I found the interior paint mid America used to make is no longer available.

I see no cracks anywhere but there may be some damage to the plastic see the first console photo Look near the driver seat switch area it has a deep scratch.

So none of them are in perfect shape.


Photos show the individual pieces from top to bottom the third one has a small hole cut into it. No idea what that was for but its hidden when the console door is closed.

Id do $50 plus shipping for your choice. all are for sale if anyone is interested.
I have one more that's in a separate storage that I know needs the paint refinished.

[AH-ZR1]

Can you let me know if you have a high pressure AC line, part number is 14104967.
Thanks.

[phrogs]

Can you let me know if you have a high pressure AC line, part number is 14104967.
Thanks.

I do, let me get you some photos.

[Auto_Funk2]

ECM Available? (please say yes!! :) )

[phrogs]

ECM Available? (please say yes!! :) )


I sold the one that came with this car recently priced where you have seen others offer them.

I do have another spare ECM but it has been out and sitting on the shelf for many years. I have not tested it since its been sitting so I need to throw it in my car and run it to be sure its good to go.

[phrogs]

Bump

radio bezel sold
Oil cooler sold

[mackguy]

I assume you want to keep it with the engine, but my recently acquired 93 has an incorrect engine oil dipstick so if you have the correct one and would be willing to part with it I'd be very interested. I'd be happy to return the one I have, so you have something in the engine...

[phrogs]

I assume you want to keep it with the engine, but my recently acquired 93 has an incorrect engine oil dipstick so if you have the correct one and would be willing to part with it I'd be very interested. I'd be happy to return the one I have, so you have something in the engine...


Yeah as of now I'm going to keep it with the engine.

[WockaFlocka]

Hey was wondering if the passenger door and the driver rear wheel were still available?

[Jayroe]

Hey Phrogs,

You might be my savior. I have a '91 ZR1 that I am desperate to find a passenger side door to replace the current one that was damaged in a fender bender.

If the door is still available, that would be AMAZING!

:cheers:

[phrogs]

Passenger door has sold thank you Jayroe.

[Jayroe]

Passenger door has sold thank you Jayroe.
Thank you Phrogs! You are Da-man!

I will probably be hitting you up for additional parts very soon.

Cheers! :cheers:

[ZBrink]

Passenger door has sold thank you Jayroe.

Hi, could you please edit the original post with the items that are sold vs still available?

[phrogs]

updated sold parts list added a few more parts available.

[Corvette95]

How is the drivers door glass? Is it scratched? If not, I would be interested. Also interested in the complete inner driver door interior. Door handle,latch, lock rods, inside door handle, metal door plate. Thanks! (need everything except regulator and motor basically but price glass and inner door seperately.)

[phrogs]

How is the drivers door glass? Is it scratched? If not, I would be interested. Also interested in the complete inner driver door interior. Door handle,latch, lock rods, inside door handle, metal door plate. Thanks! (need everything except regulator and motor basically but price glass and inner door seperately.)


Ok so everything from the door I can provide let me gather everything. Also glass has scratches not a ton but it is scratched.

[Corvette95]

Ok so everything from the door I can provide let me gather everything. Also glass has scratches not a ton but it is scratched.

Light scratches are ok.

[phrogs]

Light scratches are ok.

I will get photos of it all so you can look at it.

[Corvette95]

Still looking for a good drivers window from 90 and door internals. If you parting another one, how about the antenna grommet and do you have the ECM rear wire connector slide on cover (not the top velcro cover).

[phrogs]

Still looking for a good drivers window from 90 and door internals. If you parting another one, how about the antenna grommet and do you have the ECM rear wire connector slide on cover (not the top velcro cover).



I collected these today.

I don't have the lock and it looks like the handle was painted when the car had a repaint. But look it over did I miss any thing and if there's something you don't need let me know. I'll let you know on the antenna grommet.

If you need the ecm wire cover for the plug?

The glass has a lot of small pits or chips from what I assume is sand/dirt hitting the glass.

Hard to take photos of glass but I'll try to get better pics.

[Corvette95]

I think the pitting on the glass is too severe. I need most everything on the drivers door maybe minus electric lock actuator. Is the interior handle the one that looks painted?