WTB: Drivers Information Center (DIC) ZR-1 Logo Cover

[robrtr]

The display panel of my 1992 drivers information Center display panel has somehow developed a hairline crack. Two questions:

1) is this a common condition
2) does anyone have an extra they are will to part with?

They're available on eBay, but I haven't found one with the ZR-1 logo.

Thanks,

robrtr '92

[-=Jeff=-]

ZR-1 logo? they are all the same

[robrtr]

Interesting. I just checked the NCRS Judging Guide for 1992-93 ZR-1's.

It states that the information screen should appear black when the ignition key is off. My '92 has a ZR-1 logo on it. I'm the third owner and it's stock except for a replacement power antenna motor.

The DIC's I've seen on eBay all have a blank display so I guess one of those will work.

Does anyone else have a logo on their DIC?

[hotroddaddyo]

Is this what you are looking for?
https://www.mamotorworks.com/corvette/product/1990-1996-c4-zr-1-info-center-plate-50941

I have this DIC trim plate on my red 1990 and another style (gold outlined ZR-1 logo) on my black 1990.
This trim panel inserts into the dash panel over the DIC membrane.

[-=Jeff=-]

Yours has an acrylic cover on it

[robrtr]

So the crack might be in the acrylic cover, not the underlying screen? Any suggestions on how to remove it? Thanks.

[-=Jeff=-]

Can you post a picture?

[robrtr]

Car's in the shop tonight. I'll post a picture tomorrow. But I think hotroddaddyo and -=Jeff=- are right, it's an aftermarket add on inserted behind the dash panel.


Thanks for the help!

[hotroddaddyo]

So the crack might be in the acrylic cover, not the underlying screen? Any suggestions on how to remove it? Thanks.

I removed one by prying the top edge away from the dash trim using a thin knife blade... it is actually a tight compression fit created by the felt strip at the bottom of the logo plaque. I did not damage anything by removing it... it reinstalled tightly.

[robrtr]

Here are two pictures of my DIC. hotroddaddyo accurately described the DIC insert. I'm not an NCRS guy so I'll just leave it there. Thanks for all the responses.