Instrument panel cover replacement

[DMZR-1]

The plastic cover, for lack of a better description, over the instrument panel on my '93 is fogged up in the center. It looks like somebody probably tried to clean it with something that scratched or otherwise damaged the plastic. Does anyone know how involved it is to replace it, and where there may be a source for a replacement?

[HAWAIIZR-1]

Contact fellow Z owner Mark at Mirrock Corvette.

https://mirrockcorvette.com/

[DMZR-1]

Thanks, I will!

[A26B]

The plastic cover, for lack of a better description, over the instrument panel on my '93 is fogged up in the center. It looks like somebody probably tried to clean it with something that scratched or otherwise damaged the plastic. Does anyone know how involved it is to replace it, and where there may be a source for a replacement?

https://www.ecklers.com/1990-1996-corvette-dash-instrument-trim-lens-25-110926-1.html

[DMZR-1]

Thanks for the link! I appreciate all of the help.

[hotroddaddyo]

https://youtu.be/LVVBxdrmeDY?feature=shared

[DMZR-1]

Thanks for the link!

[Mikey]

You could also try to polish it back to clear

[DMZR-1]

You could also try to polish it back to clear

I'll give that a try. I didn't think it was possible, but I've seen some convincing videos where there were good results.

[phrogs]

I drop my steering column when I need to take the cluster out. No need to mess with the airbag.

[conesare2seconds]

The lens comes out with a screwdriver after you tilt the wheel all the way down. Easy job.

[DMZR-1]

Thanks for all of the advice. I got one of those headlight lens polishing kits and got pretty vigorous with it, and it came clean.