1990 ZR1 charcoal canister

[Dynomite]

I had to remove the front bumper Facia on a 1990 zr1 to replace a fog light housing and somehow disconnected a couple lines from the top of the charcoal canister. Where do these lines connect?

A single line shown in first photo comes out of top of canister and goes to a "T" and both lines from the "T" are open. Does either line connect to anything?

And.......there is a trick or two on removing the front bumper Facia and the fog light housing if you ever have to do that job :cheers:

https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/500x500/80-img_4978_d0012a01527bc130c368bf53f102c5efc39cf1d3. jpeghttps://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/500x500/80-img_4979_c000d1d169e33f65cd92d6148b889c3cd0f34c38. jpeg
https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/500x500/80-img_4980_42eb3695e27c6a992051fc3ce00ec5fa1131f8df. jpeg

[We Gone]

PM me an email I can send pics of mine, no way to post pics here


FSM Section 6E3-C3-1 to 4


Sent mine looks a bit different as far as routing


OK I found the line it comes off the bottom of the canister as one line comes out and Ts both lines off the T are open.

[Dynomite]

PM me an email I can send pics of mine, no way to post pics here


FSM Section 6E3-C3-1 to 4


Sent mine looks a bit different as far as routing


OK I found the line it comes off the bottom of the canister as one line comes out and Ts both lines off the T are open.


Thank you......appreciate the confirmation :handshak: