PDA

View Full Version : WTB: 1990 ZR-1 ECM


thestrawhead
04-16-2023, 03:56 PM
Looking for an E.C.M. car is running rough and when tapping on the unit it runs smooth for a short time, then back to rough.

Sent from my SM-G960U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

G8nightman
04-17-2023, 11:21 AM
I have a few available.

thestrawhead
04-18-2023, 11:11 AM
Sweet! How much, and how do I go about getting one? These are the codes for mine.19336

Sent from my SM-G960U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

G8nightman
04-18-2023, 12:03 PM
ECM's usually sell for close to 2k make me an offer. Are you sure you need one they usually don't go bad.

Starman
05-04-2023, 03:07 PM
I suggest first disconnecting the battery. Then carefully remove and reseat each electrical connector on the ECM - check for corrosion. Also remove and reseat the cal pack (chip). See if that helps before plunking down the money for another ECM.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

ZBrink
01-19-2025, 10:59 AM
Looking for an E.C.M. car is running rough and when tapping on the unit it runs smooth for a short time, then back to rough.

Sent from my SM-G960U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

Do you still need an ECM? If not, we will close the thread.