WTB: Alternator and starter

[2poor4aZR1]

ISO a starter and starter.

[GOLDCYLON]

ISO a starter and starter.

Reach out to Jerry's gaskets

[2poor4aZR1]

I didn't see anything on his site,

Asking out of curiosity, better to reach out to him over his website or through the forums (IIRC, he is a member here)


Thanks for the pointer in either case!

[GOLDCYLON]

I didn't see anything on his site,

Asking out of curiosity, better to reach out to him over his website or through the forums (IIRC, he is a member here)


Thanks for the pointer in either case!

He is a member here give him a call :cheers:

[Young1]

I get AC Delco remanufactured at rockauto.com. I like to save money. Be sure to keep your ZR-1 specific alternator pulley.

[2poor4aZR1]

I was contemplating RockAuto, the price is kinda right where I want it.

Did you have to swap your Zr1 alternator pulley to the new alternator?

[Young1]

The pulley that comes on the Delco reman will be 4 mm smaller diameter than stock. Works fine with tensioner. However I have prefer to change out to stock pulley. I like to rev her up. Have had two alternator rotors come apart even with the slower stock pulley.

[JG95ZR1]

Factory Belt will be to big and tensioner will start making noises if you use the delco pulley


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[GOLDCYLON]

I get AC Delco remanufactured at rockauto.com. I like to save money. Be sure to keep your ZR-1 specific alternator pulley.


I like to save money as well. However I also like to support Jerry who has been supporting the ZR-1 community for 25 plus years :cheers:

[2poor4aZR1]

For the sake of asking, what do used alternators and starters usually go for?

[-=Jeff=-]

For the sake of asking, what do used alternators and starters usually go for?


Alternator is a standard CS-144 Early design. I built the one currently in my car and need to build a second as a spare.


AC Delco reman is ~$120

[AirbusDriver]

My car is going to Haibeck next week. Marc is going to rebuild and re-install my original alternater so, my replacement will be available.
I'll take pics when my car comes back.