View Full Version : Removing tree sap
Jetjock
11-10-2022, 12:13 PM
Both of my cars have a rough texture on the paint when you touch it. What's interesting is that the bottom part of the doors do not when leads me to believe that it is tree sap or something like it. The cars are inside at all times which is puzzling and the place that I live now doesn't have any trees. The other place was a forest but the cars were inside the garage except when I washed them. Anyway to get rid of the film on the cars?
Roy
Mikey
11-10-2022, 04:35 PM
I would try goo gone based on your description of the problem
Mr.Yuck
11-10-2022, 05:13 PM
Soak some paper towels in Dawn dish soap. lay them down for about 45 minutes and keep them Dripping wet. The sap will wipe right off. Then wash your Z it won't leave any marks..
The older I get the faster I was.
mpiecyk
11-10-2022, 07:51 PM
DuPont Prep-Sol Cleaning Solvent 3919S (gallon)
G8nightman
11-11-2022, 02:58 PM
Sounds like you just need a good detail
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Jetjock
11-11-2022, 03:56 PM
Sounds like you just need a good detail
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Actually did that. Still there. I didn't pay for it though.
Roy
DRM500RUBYZR-1
11-11-2022, 10:37 PM
Anyone who puts product over tree sap or other contaminants should be required to surrender their buffer.
Surface prep is everything.
:cheers:
Marty
phrogs
11-12-2022, 07:22 PM
Did they use a clay bar on the car before the detail?
I mean I always use clay bar and there's always trash in your paint But is it really sap or something from a drive and road grime or whatever has made it on the car.
DRM500RUBYZR-1
11-28-2022, 07:21 AM
Have you, or any neighbors, been using spray paint, stain, or latex paint that could have blown as overspray onto the cars?
Being as it is both cars, it likely did happen at your residence.
If so, goo gone, prep sol or clay bar, all suggested earlier.
Keep us updated.
:cheers:
Marty
G-Sting
02-17-2023, 06:45 AM
I have used 70% Isopropyl Alcohol to readily remove pine tree sap on another vehicle which sits outside. Spray the sap spot, then wait about a minute for it to work. If it is sap, it'll begin to "melt" with a definite line drooling from the sap spot. Wipe with appropriate non-abrasive towel/microfiber towel. For big sap spots, it may take a few repeats to completely remove the sap. Alcohol evaporates fairly quickly, so sometimes I'll have to spray the spot a second time before wiping to keep the paint wet.
:cheers:
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.