Log in

View Full Version : Zr1 billit coolant plate air horn


viper107
10-31-2021, 06:51 PM
Forgot who makes these? I need a couple thanks

TX '90 ZR1
10-31-2021, 08:06 PM
Carter makes them. Goes by Carter 200 on the forum.
CT Machining is company name.
:cheers:

carter200
10-31-2021, 08:38 PM
Thanks Kenny 👍

I can be reached at ctmachining@gmail.com

viper107
11-01-2021, 11:37 AM
thanks guys

mcich7781
11-02-2021, 06:34 PM
Really nice item. You won't be disappointed .16664

Sent from my SM-G955U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

efnfast
11-02-2021, 06:39 PM
I have a lot of Carters art work.

carter200
11-02-2021, 06:49 PM
Thanks guys.. it?s appreciated!

viper107
11-02-2021, 08:22 PM
Carter what else can you make for our z cars

carter200
11-02-2021, 10:02 PM
https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/580x435/blingaa_9e8bf60a657332d632ddd2e7ec2372f65ae63d9f.j pg

Here is a link that Dynamite has on the Corvette Forum which shows some of my items. Email me and I can let you know more if the items I machine. You can also ask the other members on the Registry that have my items to post some pics of them.
I machine a ton of items and will also entertain ideas you may have.

viper107
11-03-2021, 05:43 PM
nice work you do!!

efnfast
11-03-2021, 07:17 PM
Carter has custom made a couple pieces for me.

Erik
11-03-2021, 07:44 PM
Carter does awesome work. I?m liking me that coolant plate. Hmmmm?.

TX '90 ZR1
11-03-2021, 07:53 PM
Carter also makes a "Y" to replace the plastic one on the fuel sender/pump assembly.
My original plastic had the seam start leaking. Took a lot of chasing to figure out why I was not holding fuel pressure!
I would recommend everyone replace their plastic one with one of Carters.
Here's a pic of his handywork.
Cheers
16671

Erik
11-03-2021, 08:03 PM
Carter also makes a "Y" to replace the plastic one on the fuel sender/pump assembly.
My original plastic had the seam start leaking. Took a lot of chasing to figure out why I was not holding fuel pressure!
I would recommend everyone replace their plastic one with one of Carters.
Here's a pic of his handywork.
Cheers
16671

The sad thing is, it?s so beautifully made, but you never see it again once it?s installed!

HAWAIIZR-1
11-03-2021, 08:22 PM
Carter will make whatever you desire if you provide him an idea and design of what you want. He will run with one off items but you need to provide some specs. Here are a few other items not shown or mentioned yet. I even had him make me tools to remove and install the harmonic balancer when I was rebuilding my LT5. He most recently custom made me top rear coilover brackets for my pin top shock mounts for the FX3 shocks with a template to drill out with hole saw bit and all. He is the MAN!

16672


16673

16674

16675




Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

TX '90 ZR1
11-03-2021, 10:38 PM
The sad thing is, it?s so beautifully made, but you never see it again once it?s installed!

It is beautifully made as is all of Carter's work.
The one I got is the prototype. I think he may have made a bit of adjustment to it for better fitment since I got mine.
Even though I have not seen it since installation, it is worth every penny for the peace of mind knowing I will never have another problem with it!
:cheers:

carter200
11-03-2021, 10:57 PM
Thanks guys. I?ve been the Registry (and before the current registry) machinist for 25 years now and counting. If you know anyone who needs my items or something made please sent them my way. I tried for about 8 years to make a web site but did not have the spare time. I did have a presence on the on the previous registry but it has disappeared. I?m working on either a catalog a or some way to show my items in one place. Hang in there and please think of me when you need items.
Thanks again for all your support and you know who you are 😁.