hood mini shocks

[aafc]

Question? On my 1990 ZR-1 I have mounts for two mini shocks. What or
how do you secure them to the mounts. Now some cars do not have the
mounts with studs and you could use bolts and spacers to secure them.
VIN 2546 build date march 1990.
John

[Jagdpanzer]

Here is a photo of my 94
16519


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Jagdpanzer]

Another view
16520


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[We Gone]

My 91 had the studs so I just got the shocks and keepers for a earlier year that they were available on.

[aafc]

ON mine I have studs on the brackets.

16521

[HAWAIIZR-1]

Here is a photo of my 94
16519


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)



Phil, Do you also run the stock single lift with the additional two small lifts? My understanding is that it is too much lift? I bought the kit for the two small ones about 10 years ago and never installed them. Now that I think about it, it was for my 90 and like John mentioned were studs. Thanks.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[aafc]

What year were they available on? I'll keep looking maybe e-clip?
John

[Jagdpanzer]

The stock single lift cylinder is still installed .
It was getting weak however, after installing the two small ones they work fine together plus you have the safety stop in case a wind gust comes along.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[HAWAIIZR-1]

The stock single lift cylinder is still installed .
It was getting weak however, after installing the two small ones they work fine together plus you have the safety stop in case a wind gust comes along.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)



Got it; thanks Phil! [emoji1360]🤙🏼


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Young1]

I put the minis on my 91. Held in place with small flat washers and small cotter pins. Easy Peasy. The holes for pins are in the studs. 3 gas struts are great.

[HAWAIIZR-1]

I put the minis on my 91. Held in place with small flat washers and small cotter pins. Easy Peasy. The holes for pins are in the studs. 3 gas struts are great.



[emoji1360][emoji847]🤙🏼


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[aafc]

Guy's,
Thanks for the information on the studs with holes on them. After cleaning
out 30 + years of dirt and grime I was a able to install the mini shock on
the right side of hood. I now can open hood at a 45 deg. and still stay open
( just for show) I won't leave it like that. Also my hood is an early TELDO PRO
3 in so it is lighter the stock.


http://www.zr1.net/forum/picture.php?albumid=505&pictureid=4673

[JT ZR-Won]

Here is a photo of my 94
16519


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Not to change the subject, but what kind of air filter housing is that? It looks great...Coplan?

- Jay

[Jagdpanzer]

Air filter housing is an improved version of the Coplan made by the extraordinary craftsman and WAZOO member George Braml. Unfortunately George passed away several years ago. Way to early. We sure do miss him.

[JT ZR-Won]

Air filter housing is an improved version of the Coplan made by the extraordinary craftsman and WAZOO member George Braml. Unfortunately George passed away several years ago. Way to early. We sure do miss him.

Thanks for the info. That is so sad. Well you have one cool car there!